All of the staff that work at Backyard Plus are outstanding but I must give Paul B. a special shout out. He is so patient and understanding when dealing with two hot tub owners trying to repair a 2007 Solana tub (replaced everything inside the service panel of the hot tub). His customer service skills are the best I have ever had the opportunity to experience firsthand as a DIY'er I have dealt with many. I truly cannot sing Paul’s praises loud enough. Our appreciation for his help is unmeasurable. Thank you, Paul, and Backyard Plus for offering such outstanding service. Warmest Regards, Karen A., Tallahassee, FLOn 12/08/2023 by K. A. (verified customer)
Showing 91–120 of 246 results
-
Sku: 33421Comm Cord, Tiger River Pre-1995
This communication cord looks like a Cat5 cable It communicates to the main control box circuit board (70374 or 70375) from the control panels PCB board in the 1992-1994 Tiger River Khyber, Manora & Tondi spa models -
Sku: 33368
Screw, 10-32 x 3/8in
This screw is used on Hotsprings Spas made from 1994 to 1996 to hold the plastic stand-off in place on the mounting plate from behind This stand-off accepts the screws from the front of the control panel that are used to hold the control panel in place -
Sku: 33275
O-Ring, Control Panel .07 X .07
These o-rings used on 1992 to 1997 Tiger River control panels, fit around the posts on which the buttons for the jets and lights glide up and down The o-rings serve as pads to soften the stop of the button when it is pushed all the way down -
Sku: 33138
Spring, Control Panel 1/8in X 1-1/4in
Spring used on the button on Tiger River Control Panels from 1992-1994 This spring resides behind the button to help the button rebound after being pressed to activate the jets or lights -
Sku: 33132
Push on Retainer, .094
Push on retainer, 094 -
Sku: 32425
Switch, Toggle
This toggle switch was used on the 1991-1993 Grandee to turn off the "Timed Jets" feature an also used on the 115 volt Hot Spring and Tiger River spa models to activate the "Summer Mode" (aka Summer Timer) -
Knob spring, for the rear side of the control panel, found on Hot Spring models from 1994-1997
-
Sku: 30377
Screw, Nylon #6-32 X 1/4in
Nylon screw, #6-21 x 1/4in -
Sku: 30369
Screw, #6 X 5/8in Stainless Steel
Stainless steel screw, #6 x 5/8in, for the control panel on Hot Spring Models from 1989-1993 -
Sku: 30361
Screw, Metal #10 X 3/4in
Metal screw, #10 x 3/4in, found on the control panel of Hot Spring models from 1989-1993 -
Sku: 30360
Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
Nylon pan head slotted screw 10-24 x 1 1/2in
-
Sku: 30335
Screw, #6 X 1/2in Stainless Steel
Stainless steel screw, #6 x 1/2In -
Sku: 30332
Screw, #6-32 X 3/8in Stainless Steel
Stainless steel screw, #6-32 x 3/8in -
This screw is used to hold in place the standoffs (35087) that secure the thermostat board (71340)to the topside control panel in Tiger River spas made from 1995 to 1997
-
Sku: 300859
Nut, 2.5mm
This nut is used to secure the circuit board to the back of the control panel bezel on Tiger River spas from 1992-1997 It replaces a small spring clamp that used to do the same job The posts that the nut screws on to are actually plastic and are not ...read more -
Sku: 20355
Timer Standoff,with Screw
Timer standoff with a screw -
Sku: 20314
Jet Knob, Black 4-1/2in, Hot Spring
Control panel black colored Jet knob used to turn on the jet pump on the Hot Spring models prior to 1988 This jet knob has a ridge around the knob (dial) for a better grip with wet hands It has a 4-1/2" long stem which inserts into the back of the control ...read more -
Control panel black colored temperature knob (dial) used to adjust the temperature on the Hot Spring models prior to 1988 It has a 4-1/2" long stem which inserts into the back of the control box and turns the D-shaft of the thermostat
-
Control panel black colored Jet knob used to turn on the jet pump on the Hot Spring models prior to 1988 This jet knob has a ridge around the knob (dial) for a better grip with wet hands It has a 1-1/2" long stem which inserts into the back of the control ...read more
-
Control panel black colored temperature knob (dial) used to adjust the temperature on the Hot Spring models prior to 1988 It has a 1-1/2" long stem which inserts into the back of the control box and turns the D-shaft of the thermostat
-
Sku: 33570Washer, #10 .200 X .359 X .063
Washer, #10 200 X 359 X 063 -
Sku: 33801
Rotary Switch
Rotary switch -
Two of these screws are used to hold the thermostat in place to the circuit board on the topside control panel for Tiger River spas from 1992 to 1994
-
This retainer ring is used to hold the thermostat knob in place on the Tiger River topside control panel
-
Sku: 34009
Screw, Control Panel, Tiger River
This screw is used to mount Tiger River control panels to the shell of the spa on the bar top It secures a flip-out tab that clamps the control panel to the shell from the backside of the shell It was used on all models from 1992-1997 -
Mounting plate found on the backside of all 1994-1997 Hot Spring Classic spas control panels
-
Sku: 34322
Control Panel Lock O-ring
Control panel lock o-ring, found on Hot Spring Models from 1994-1997 -
Sku: 34359
Screw, #8-16 X 1/2in
Screw, #8-16 X 1/2in, found on control panels on Hot SPring models from 1994-1997 -
(Package of 5) The standoffs are plastic pins used to mount this circuit board onto the inside of the control box This keeps the backside of circuit boards from touching the metal case of the control box in all 1990-1993 Hot Spring spa models
Showing 91–120 of 246 results