EXTERIOR & SURFACE REPAIR

For Hot Spring, Tiger River & Hot Spot spas

Get high-quality Hot Spring Spa Wood Siding Panels, Equipment Compartment Doors, Wooden Slats, Cover Lifters, Cover Locks, Crack Repair Kits, and other related parts for your spa exterior.

Brand: Hot Spring Pre 89

Showing 1–30 of 238 results

  • Uprite Cover Lifter (7in Clearance)
    The Uprite® Lifter is a favorite for close clearance needs If your spa needs to be nudged up close to the house, fence or gazebo then this lifter is ideal The Uprite® (sometimes spelled upright) only requires seven inches (7") of rear clearance to ...read more
    $336.00
    Add to cart
  • CoverCradle I Cover Lifter (24in Clearance)
    The CoverCradle® is our smoothest operator As the spa cover is folded back the “cradle” design is assisted by dual pneumatic gas shocks lowering it to a gentle rest It only needs twenty-four inches (24") of rear clearance
    $499.20
    Add to cart
  • CoverCradle II Cover Lifter (24in Clearance)
    The CoverCradle® II has all the features of its big brother in a single pneumatic gas shock design Our customers who choose either of the CoverCradle® models don't have clearance issues and favor the lower resting point of the cover for increased ...read more
    $421.80
    Add to cart
  • Lift 'N Glide Cover Lifter (14in Clearance)
    The Lift 'N Glide® is easy to install and ready to ship This lifter only requires fourteen inches (14") of rear clearance and three inches (3") on each side
    $275.00
    Add to cart
  • Side Arm Assembly, Cover Cradle
    This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa
    $122.28
    Add to cart
  • Cover Lock Kit, 4 Sets, Black
    Four sets of black cover locks This kit has both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws All four of these sets come standard in this kit This coverlock kit replaces all other colors and ...read more
    $19.49
    Add to cart
  • Gas Spring-Uprite
    The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more
    $86.70
    Add to cart
  • Ball Stud, Cover Lifters, 1/4in Threaded Shaft (Qty of 1)
    There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
    $5.30
    Add to cart
  • Espresso Slat, Flat
    This is a single width slat in synthetic espresso material for use on Hot Springs and Hot Spot models   Check your serial number in the Parts Finder above to be sure this part is for your spa
    $15.53
    Add to cart
  • Hardware Bag #1, Cover Cradle
    This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more
    $12.80
    Add to cart
  • Key, Cover Lock (Set of 2)
    These keys (set of two) lock & unlock the spa covers (latches) cover locks that are located on the end of the four straps   The cover locks are lockable to help prevent or discourage unauthorized entry into the spa
    $3.22
    Add to cart
  • Door Screw, Hot Spot
    This screw is used to attach the door(s) on all Hot Spot spas beginning in 2003 that use wood or synthetic wood siding: 1/4-20 x 1-3/4" Truss stainless steel Phillips head screw   Price is per individual screw This part number replaces the obsolete 1-1/2" ...read more
    $0.86
    Add to cart
  • Slat, Standard Double Boston, Redwood, Hot Spring
    Replacement unstained redwood slat found on the front, door, sides and back on the 1995-1998 1/2 Hot Spring Grandee, 1995-1996 Highlife, 1995-1998 Sovereign, 1995-1999 Prodigy and Jetsetter spa models 5-3/8" wide x 32" long Location: Front, Door, Sides ...read more
    $30.61
    Add to cart
  • Wenge Flat Slat, Synthetic Redwood Color 1098601
    Slat, Flat, Wenge, Synthetic Redwood Color   Hot Spring Models 2006-2015   This slat makes up the majority of the Side and Back Panels, including the Door PLEASE NOTE:   Normal length of slat is 32 75”; however, only the 30 38” length is available ...read more
    $19.72
    Add to cart
  • Gas Shock, Cover Cradle
    Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black
    $58.48
    Add to cart
  • Brass Door Screw Insert, 1/4in
    This brass insert is used on the door frames of various spa models to provide attach a door using a stainless steel screw which screws into this insert
    $2.38
    Add to cart
  • Gas Shock, Cover Cradle II
    Replacement 60lb gas spring shock for all Cover Cradle II cover lifters from the makers of Hot Springs spas The gas shock color is black   One of these shocks is used on the Cover Cradle II
    $68.30
    Add to cart
  • Gas Spring Lock-Uprite
    The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area
    $54.49
    Add to cart
  • Ball Stud, Cover Lifter, 5/16in Threaded Shaft (Qty of 1)
    This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
    $1.93
    Add to cart
  • Screw, #4 X 1/2in Stainless Steel
    Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas
    $1.53
    Add to cart
  • Redwood Slat, Corner, Hot Spring
    Replacement unstained redwood slat used on the corners of 1997-1998 1/2 Hot Spring Grandee, 1995-1998 Sovereign, 1995-1999 Prodigy and Jetsetter spa models Location: Corners of skirting Length: 32" Width: 3-1/4" Note: All replacement slats are 32" in ...read more
    $30.01
    Add to cart
  • Slat, Coastal Gray, Wenge Style, Hot Spring
    This is a synthetic coastal grey slat in the wenge style used on Hot Springs spas
    $16.49
    Add to cart
  • Brass Door Frame Insert, #20 X 1/4in
    This brass insert is used on the equipment door's frame to provide a place for the door screws to secure the equipment door into place This part is used on all 1989-2007 Hot Spring spa models (except the Classic) and all Tiger River spas
    $3.76
    Add to cart
  • Everwood Slat, Hot Spring, Redwood Color
    This Everwood piece is used both vertically and horizontally It is the most common piece used on the sides, back, front and doors on all 2002-2005 Hot Spring spa models Note: 38" long X 5" wide
  • Intake Vent Screen
    This aluminum perforated strip mounts at the bottom of the equipment access door to keep rodents from making their home in the warmth of your Hot Spring or Tiger River spas equipment compartment This screen is cut to length Not available for the Hot Spring ...read more
    $46.07
    Add to cart
  • Screw, 8 X 1 Pan Head, Phillips, Stainless Steel, Sheet metal screw
    This stainless steel screw secures both male and female door fasteners Used on all 1995-2009 Hot Spring spa models Price reflects a quantity of one Also used on the Hot Spring & Tiger River pre-1994 water diverter valve kit
    $1.82
    Add to cart
  • Slat, Flat, Everwood, Coastal Gray
    Everwood flat synthetic slat in Coastal Gray Color, used on 2004-2005 Hot Spring model spas Both horizontal and vertical slats
    $56.75
    Add to cart
  • Corner Flat Everwood Slat, Coastal Gray
    Everwood Corner Slat   This is a single width corner slat in synthetic Coastal Gray material for use on Hot Springs spas made from 2004 to 2005   Four of these slats are used on each corner of the spa in addition to one 73125 slats
    $66.28
    Add to cart
  • Everwood T-Slat, Hot Spring Redwood
    This redwood colored Everwood T-Slat is a vertically mounted piece It is used on the sides, back, front and on some doors of all 2002-2008 Hot Spring spa models   Check your serial number in the Parts Finder to be sure this part is for your spa
    $52.15
    Add to cart
  • Equipment Door Fastener, Male Piece
    This pointed fastener attaches onto the equipment compartment access door and is inserted into its counter-part fastener that is attached to the door frame of the equipment compartment
    $1.74
    Add to cart

Showing 1–30 of 238 results