Great serviceOn 04/19/2024 by H. P. (verified customer)
Get Watkins OEM or generic No-Fault Heaters, Flow-through heaters, Heating Elements, Wires, Plugs, and other related parts.
Showing all 21 results
-
Sku: 77726-BUNDLE
Gecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more -
This Hot Spot heater works with 78448 (YJ2 and YJ3 series) control box found on Hot Spot models beginning in 2022 and the 1st quarter of 2023 It is also used as a retrofit option for 2003-2005 Hot Spot wired for 115v, Solana 2003- 2005 and Hot Spot Spring ...read more
-
After-market replacement Hot Spot heater that is compatible with 76091 control box (Gecko S-Class) used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models ...read more
-
Heater connection wire kit, 8" long, 10 gauge wire, qty of 2 Connects from Hot Spot heater to board of S-Class series control box
-
Grounding bar for the Hot Spot heater (after-market Gecko S-Class) 5 Position, 14-6 AWG This grounding bar is attached to the heater on Hot Spot and Solana brand spas and allows the pump and other accessories to have a secondary ground tied into the ...read more
-
Sku: 73994
Hot Spot Heater and Solana Heater
This flow-thru style Hot Spot heater is used on the Solana TX, RX, and SX beginning in 2006, as well as the Hot Spot models beginning in 2006, except the Hot Spot Sprint and Dash This heater is connected to the control box and to the spa's plumbing using the ...read more -
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more
-
This Hot Spot heater electronic pressure switch is a safety device that will shut down the heater if a "low water flow" condition occurs It is used on Hot Spot models (except Sprint & Dash models) and Solana spa models Some symptoms of failure include ...read more
-
This heavy-duty fiberglass-reinforced polymer split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age and finally over-tightening The two halves of this fitting are held ...read more
-
This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
-
Sku: 1306501
Power jumper, 2 pin, 15mm, Hawk
This 2 pin jumper is used in the Cedric Control box (73859) as well as the Hawk control box (76840) for Hot Spot tubs -
This replacement compression fitting split nut (AKA Split Union Nut-2") is used to connect heaters on the 1993-1994 Hot Spot Z, all 1998-current Hot Spot models, Solana models beginning in 2000 and all 1992-1994 Tiger River spas It is designed in two half ...read more
-
Sku: 70905
Heater Tailpiece, Hot Spot and Solana
This heater tailpiece glues into the plumbing on one end and the threaded end is coupled with the compression nut of the heater on a 1993-1994 Hot Spot Z, all 1998-2002 Hot Spot models, and all 2000-current Solana spa models The heaters have a compression ...read more -
Sku: 73994-BYP
Hot Spot Heater and Solana Heater- AFTER MARKET
This Hot Spot heater is a comparable after-market flow-thru style heater that can be used on the Solana TX, RX, and SX beginning in 2006, as well as the Hot Spot models beginning in 2006, except the Sprint and Dash This heater is connected to the control box ...read more -
Sku: 37726
Heater Housing Tail Piece, 2in x 1 1/2in
This is a heater tailpiece for a 2-inch heater housing The tailpiece is designed to accept a 1 1/2" PVC pipe or a 1 1/2" male PVC fitting The connection should be made using PVC cement and primer -
Sku: 33111
Heater, Hot Spot
This heater was used on the 1993-1994 Hot Spot Z model (round spa) This heater is attached to the rear of the control box and is a flow-through type heater It's secured to the rear of the control box using two bolts and attached to the spa's plumbing ...read more -
This heater was only used on the 1998 Hot Spot RE, RLX, SE, and SLX spa models This heater is attached to the rear of the control box and is a flow-through type heater It's secured to the rear of the control box using two bolts and attached to the spa's ...read more
-
Obsolete: Use 1642001-1 This heater tailpiece glues to 2" PVC pipe or a 2" male PVC fitting using PVC primer and cement The threaded side of the fitting will connect to any 2" standard heater union to connect a flow-through type heater This specific ...read more
-
This flow-thru style was used on the 1999-2002 Hot Spot RE, RLX (Z & ZQ model-round spa), 1999-2002 Hot Spot SE & SLX (Y & YQ model-square spa) and 2001-2002 Hot Spot W & WQ model (square spa-wood siding) It was also used on the 2000-2002 ...read more
-
Sku: 10066
Thermometer
No Longer Available Thermometer
Showing all 21 results