PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Brand: Solana

Showing 1–30 of 241 results

  • Vinyl Tubing, Thick Walled, 3/4inch Dia. (ID) x 36inch
    3/4" inside diameter (ID) by 36" long section of specially made thick-walled, clear vinyl tubing This thick-walled tubing will stand up to the harsh chlorinated spa environment for years to come This is the size of tubing that connects the circulation pump ...read more
    $16.90
    Add to cart
  • Vinyl Tubing, Thick Walled, 1/2in Inside Diameter x 36in
    1/2" inside diameter (ID) by 36" long section of specially made thick-walled, clear vinyl tubing This thick-walled tubing will stand up to the harsh chlorinated spa environment for years to come This is the size of tubing that connects the circulation pump ...read more
    $9.29
    Add to cart
  • Vinyl Tubing, Thick Walled, 3/8in Inside Diameter x 36in
    3/8" inside diameter (ID) by 36" long section of specially made thick-walled, clear vinyl tubing This thick-walled tubing will stand up to the harsh chlorinated spa environment for years to come Measures 3/8" ID; 9/16" OD Uses 34465 spring clamp 3/4" ...read more
    $7.95
    Add to cart
  • Vinyl Tubing, Thick Walled, 1/4 inch Dia. (ID) x 36 inches
    1/4" inside diameter (ID) by 36" long section of specially made thick-walled, clear vinyl tubing This thick-walled tubing will stand up to the harsh chlorinated spa environment for years to come This is the size of tubing that connects from the front of the ...read more
    $5.29
    Add to cart
  • Injector, Freshwater Ozone, Red
    This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas) It is designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system The injector is matched to the ...read more
    $43.86
    Add to cart
  • Tubing Kit, Del-Ozone-1/4in with Check valve
    This 1/4" ID (3/8" OD)  ozone-resistant tubing and parts kit by Del-Ozone works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length ...read more
    $32.44
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more
    $55.00
    Add to cart
  • Spring Clamp, 3/4 inch
    3/4" spring clamp (aka wire clamp) is used to secure the 3/4 inch vinyl tubing (70315) to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers or hose clamp pliers to ...read more
    $1.22
    Add to cart
  • Water Check Valve, 3/4 inch
    This 3/4" water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the backflow of water through the circulation pump once the jet pump is activated All water check valves have arrows stamped on the outside to indicate ...read more
    $8.25
    Add to cart
  • Bleedline Nipple, 1/4in, Hot Spring
    This nipple is glued into various PVC fittings in various places on Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Simply drill out the broken 1/4" barbed fitting with a 19/64" drill bit (only this size drill bit) Then glue this ...read more
    $2.14
    Add to cart
  • Check Valve (Air), Hot Spring, Tiger River, Limelight, Hot Spot
    Air check valve for Hot Spring, Tiger River, and Hot Spot spa models This check valve is located in the equipment compartment under the bartop Its primary function is to prevent water from back flowing into the equipment compartment should a hydrotherapy ...read more
    $20.09
    Add to cart
  • Spring Clamp, 1/4in
    Used to secure 1/4" (ID) vinyl tubing 70318 (OD measure 7/16") to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers or hose clamp pliers to squeeze, then slide this ...read more
    $1.02
    Add to cart
  • Cap, Drain Valve - 3/4in with Washer
    Black 3/4" hose bib thread cap used on the drains of 1993 forward Hot Spring, Tiger River, Hot Spot, and Solana, and Limelight spa models   It also includes the washer   This cap is used both on the "Primary" Drain Valve, and the "Secondary" Drain Valve
    $1.70
    Add to cart
  • O-Ring, Wallfitting Front-Red
    Silicone wall fitting o-ring used in various places on Hot Spring, Tiger River, Hot Spot, and Solana spas
    $4.94
    Add to cart
  • Precision Jet Elbow
    This elbow is used to glue onto the rear of the Precision Jet Body This elbow is an odd size and is not available at the local hardware store
    $3.24
    Add to cart
  • Compression Fitting O-rings, for 2 inch Union (Qty of 2)
    (Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more
    $3.42
    Add to cart
  • Compression Fitting O-ring, for 2 inch Union
    O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more
    $1.80
    Add to cart
  • Compression Fitting, 2in with O-Ring
    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more
    $12.99
    Add to cart
  • Compression Fitting, 1-1/2in with O-Ring
    This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more
    $9.86
    Add to cart
  • Manifold, Flow Cone
    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting
    $11.72
    Add to cart
  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Silicone Grease, 1 oz. Tube
    Silicone grease ideal for lubricating o-rings
    $4.98
    Add to cart
  • Check Valve, Air, with Ball 1/2in
    It is used to prevent water from backing into the airlines when the jets are off It is at the back of the Moto-Massage housing and glued into a 90-degree elbow It is also on the jetstream jets
    $1.74
    Add to cart
  • Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
    Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard
    $19.53
    Add to cart
  • Spring Clamp, 1/2in
    1/2" spring clamp for securing 1/2" ID vinyl tubing (70316) to components Item 70316 has an inner diameter of 1/2" and an outer diameter of 3/4" This clamp fits the 3/4" OD Note: Wear eye protection when squeezing these little rascals Service techs ...read more
    $1.19
    Add to cart
  • Split Nut for 2in Compression Fittings, Heavy Duty
    This heavy-duty fiberglass-reinforced polymer split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age and finally over-tightening The two halves of this fitting are held ...read more
    $19.10
    Add to cart
  • Precision Jet Tee
    This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store
    $14.43
    Add to cart
  • Coupling, Barbed, 1/4in x 1/4in
    Barbed coupling used to splice together 1/4" vinyl tubing
    $3.92
    Add to cart
  • Spring Clamp, 3/8in
    3/8" spring clamp (aka wire clamp) is used to secure the 3/8 inch vinyl tubing 70317 (9/16" OD) to various components Note: Wear eye protection when squeezing these little rascals Service techs typically use either needle-nose pliers are hose clamp ...read more
    $1.27
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart

Showing 1–30 of 241 results