Jet Pump Replacement Parts

Brand: Solana

Showing 1–30 of 43 results

  • Impeller, Wavemaster 6000
    Replacement impeller for the Watkins Wavemaster 6000 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Please verify your pump's model number and vendor code when selecting replacement parts
    $34.13
    Add to cart
  • Impeller, Wavemaster 4000
    Replacement impeller for the Watkins Wavemaster 4000 jet pump This impeller screws onto the pump motor's threaded shaft with regular right-hand threads Please verify your pump's model number and vendor code when selecting replacement parts
    $33.35
    Add to cart
  • Shaft Seal Kit, Watkins Wavemaster Jet Pump, 5/8" Shaft, Vendor Code 4081
    The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps Please find your pump model number and if your pump is an OEM ...read more
    $18.87
    Add to cart
  • Shaft Seal, Watkins Wavemaster Jet Pump, Vendor Code 3536, LX (Lingxiao)
    The shaft seal kit is used to prevent water from leaking from around the rotating pump shaft This seal kit is used on most of the Watkins Wavemaster jet pumps and after-market jet pumps manufactured by LX (Lingxiao) Please find your pump model number and ...read more
    $33.85
    Add to cart
  • Wear Ring, Wavemaster
    The jet pump wear ring keeps water from back flowing around the impeller which would reduce the jet pressure significantly It fits inside the "wet end" and slides over the impeller with the ridge side farthest away from the front of the impeller (i e , ...read more
    $3.90
    Add to cart
  • Wavemaster Volute O-Ring
    LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 56-frame LX wet ends item 77713 and 77712  
    $1.53
    Add to cart
  • Wavemaster Volute O-Ring
    LX MODEL O-RING Replacement volute o-ring (largest o-ring) for the Wavemaster pumps with vendor number 3536 (LX) This o-ring fits the 48-frame LX wet ends item 77711, 77710, and 77709 Stamped on wet-end: PP-GF30; B436-14 (03) Reference models (see ...read more
    $3.45
    Add to cart
  • Volute O-Ring, Wavemaster
    This is the largest O-ring used on the current Wavemaster series of wet ends for Hot Springs, Tiger River, Limelight, Solana and Hot Spot model spas This o-ring fits between the suction cover and the volute of the pump series: XP2/XP2E This o-ring is only ...read more
    $13.46
    Add to cart
  • Wavemaster Volute O-Ring
    GECKO MODEL O-RING Replacement o ring (largest o-ring) for the Wavemaster 4000, 6000, 8000 (ver 3), 8200, 9000 (ver 3), 9200 jet pumps Will fit on pump series: XP2/XP2e
    $13.46
    Add to cart
  • Volute Cover Screw, 8-32 X 5/8in, Wavemaster
    GECKO MODEL SCREW This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps
    $1.35
    Add to cart
  • Compression Fitting O-rings, for 2 inch Union (Qty of 2)
    (Quantity of 2 o-rings) O-rings used on the pumps 2" compression fittings ( 71036 ) found on most Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Also used on the replacement "Wet End" pump kits and some heaters The 2" measurement refers ...read more
    $3.42
    Add to cart
  • Compression Fitting O-ring, for 2 inch Union
    O-ring used on the 2" compression fittings (71036) on most Hot Spring, Tiger River, Hot Spot, and Solana spa models The 2" measurement refers to the inner diameter of the most narrow part of the compression fitting/union The o-ring that is included measures ...read more
    $1.80
    Add to cart
  • Compression Fitting, 2in with O-Ring
    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction side of most Wavemaster® XP2 or XP2e Series Jet Pumps Other compression fittings are the 71038 and 71037 ...read more
    $12.99
    Add to cart
  • Compression Fitting, 1-1/2in with O-Ring
    This 1-1/2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling It is found on the suction and/or discharge side of FMHP/CP Series Wavemaster® Jet Pumps 2" x 1-1/2" Compression Fitting click ...read more
    $9.86
    Add to cart
  • Manifold, Flow Cone
    This 2" compression fitting, which includes the o ring, is sometimes referred to as a pump union or compression coupling 1-1/2" Compression Fitting 2" Compression Fitting
    $11.72
    Add to cart
  • Barbed Fitting with o-ring, Wavemaster and Starite
    Hot Spring, Hot Spot & Solana spas only This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple The ...read more
    $6.10
    Add to cart
  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Mounting Bolt, Wavemaster
    1/4-20 X 1-1/4" long mounting bolt that secures the pump to the floor of the equipment compartment Used on the Wavemaster 4000, Wavemaster 6000 and Wavemaster 7000 3 jet pumps
    $1.16
    Add to cart
  • Mounting Bolt Washer, Wavemaster
    Stainless steel washer used with the bolts that secure a pump to the pump stand and the pump stand to the floor of the equipment compartment 5/16"
    $1.54
    Add to cart
  • Pump Power Cord, Wavemaster
    This power cord is a 14/3 (60" long) with flag terminals on both ends The cord has three wires inside which are BLACK,  WHITE, GREEN, and is used on the one-speed Jet Pumps
    $11.46 View OEM
    Add to cart
  • Power Cord, Wavemaster, 2-Speed
    This power cord is a 14/4 (60" long) with flag terminals on both ends The cord has four wires inside which are BLACK, RED, WHITE, GREEN and is used on the two speed Jet Pumps
    $13.90
    Add to cart
  • Silicone Grease, 1 oz. Tube
    Silicone grease ideal for lubricating o-rings
    $4.98
    Add to cart
  • Wear Ring, Wavemaster
    This is the XP2E wear ring for the after-market impellers 71406-SW, 71405-SB and 71404-SY Please check the dots at the end of your impeller Item 71406-SW (Silver, White), item 71405-SB (Silver, Blue) and item 71404-SY (Silver, Yellow)
    $7.11
    Add to cart
  • Split Nut for 2in Compression Fittings, Heavy Duty
    This heavy-duty fiberglass-reinforced polymer split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age and finally over-tightening The two halves of this fitting are held ...read more
    $19.10
    Add to cart
  • Rubber Feet, Wavemaster (Set of 4)
    Rubber Mounts (feet) for the Wavemaster jet pump These are used to buffer the vibrations from the jet motor within the equipment compartment   Comes in a set of four
    $18.47
    Add to cart
  • Compression Fitting Split Nut, Heater, 2in
    This replacement compression fitting split nut (AKA Split Union Nut-2") is used to connect heaters on the 1993-1994 Hot Spot Z, all 1998-current Hot Spot models, Solana models beginning in 2000 and all 1992-1994 Tiger River spas It is designed in two half ...read more
    $8.86
    Add to cart
  • Rubber Foot, Wavemaster
    Used on the base of the Wavemaster 8000 (ver 3), 8200, 9000 (ver 3) and 9200 jet pump to reduce the pumps noisy vibrations being transferred to the spa shell Sold individually
    $3.12
    Add to cart
  • Exhaust Hose, Wavemaster
    This exhaust hose connects onto the rear of the jet pumps shroud (if equipped) to discharge hot air from the jet pump motor This method of cooling the jet pump ensures a longer lifespan of the pump's motor
    $14.36
    Add to cart
  • Split Nut for 1.5in Compression Fittings
    This 1-1/2" split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age, and over-tightening The two halves of this fitting are held together by two screws
    $8.58
    Add to cart
  • Tailpiece, Wavemaster 7000 (version 1)
    Inside piece of the 2" compression fitting for a Wavemaster 7000 (v 1 and v 2) and a Wavemaster 9000
    $3.01
    Add to cart

Showing 1–30 of 43 results