Welcome to Backyardplus! In this post, we show you how to replace the ACE chlorine generator cell. Before we get started, let’s go over the tools and parts you will need.
Tools you will need:
- Phillips head screwdriver
- Channel locking pliers
- Wire cutters
- Duct tape
Parts you will need:
- 76078 ACE Chlorine Generator Cell
Step 1. Disconnect power from the spa.
Step 2. Drain the spa.
Step 3. Remove the equipment door and IQ 2020 control box lid.
Step 4. Disconnect the ACE cell from the ACE controller.
Step 5. Remove the filter compartment lid, remove the cell from the filter and loosen the nut.
Step 6. Cut the old Ace cell cord and remove the chlorine generator cell from the filter compartment.
Step 7. Install the new ACE chlorine generator cell.
Step 8. Connect the cut end of the old cord to the two connectors on the new cord with duct tape.
Step 9. Pull the cords through the conduit.
Step 10. Remove the tape and plug the cell into the generator.
Step 11. Cover the O-ring with silicone grease and install the nut. Tighten it with channel locking pliers.
Good job!
Watch the video here! “How to Replace the ACE Salt System Chlorine Generator Cell”
Questions about your spa? Contact us! We are the top Hot Spring spa parts retailer on the web.
Call us at (805)541-9000
Text us to receive technical support
In addition to “How to Replace the ACE Salt System Chlorine Generator Cell” we offer:
- Our Parts Finder which allows you to find exact-match replacements for your hot tub
- Free technical support that will allow you to maintain and repair your own spa accordingly
- Information regarding your products and their usage through our blog posts.
- Tutorials and assistance through our videos
- Follow us on our Facebook page
Our goal here at Backyard Plus is to help save you money by avoiding costly service calls for repairs that you can easily do yourself!