Welcome to Backyardplus! In this post, we show you how to replace the panel clips on a Hot Spring NXT Spa. Before we get started, let’s go over the tools and parts you will need.
Tools you will need:
- Phillips head screwdriver
Parts you will need:
- 77290 Panel Clip
Step 1. Remove the door or panel.
Step 2. Remove the old panel clip by loosening the two screws.
Step 3. Insert the small part of the clip into the large part of the clip.
Step 4. Place the two screws into the panel clip.
Step 5. Insert the screws into the screw holes and tighten the screws but do not tighten the screws all the way down.
Step 6. Make sure the panel clip slides left to right and up and down.
Step 7. Install the door panel. Move the clip up and then to the right before tightening the screws.
Step 8. Tighten the screws all the way.
Watch the video here! “How to Replace the Panel Clips on a Hot Spring NXT Spa”
Questions about your spa? Contact us! We are the top Hot Spring spa parts retailer on the web.
Call us at (805)541-9000
Text us to receive technical support
In addition to “How to Replace the Panel Clips on a Hot Spring NXT Spa” we offer:
- Our Parts Finder which allows you to find exact-match replacements for your hot tub
- Free technical support that will allow you to maintain and repair your own spa accordingly
- Information regarding your products and their usage through our blog posts.
- Tutorials and assistance through our videos
- Follow us on our Facebook page
Our goal here at Backyard Plus is to help save you money by avoiding costly service calls for repairs that you can easily do yourself!