Wet End Kit, Watkins Wavemaster 6000 Jet Pump, 48 Frame, 1.5HP, SD, 2″MBT, After-Market

Sku: 77710-BYP
$111.08

This is the after-market “Wet End” is for the Watkins Wavemaster® 6000 jet pump as well as the Wavemaster® 5000 (1.5 HP) that was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models.

This part can be found on many Solana, Hot Spot models from 1998 to 2023

View Diagrams & Part Compatibility

View OEM
SKU: 77710-BYP Categories: , Tags: , , , ,

Description

What’s Included: Volute, volute cover, volute o-ring, volute stainless steel screws, wear ring, impeller and the shaft seal.

Description: This “Wet End” is for the Watkins Wavemaster® 5000 and Wavemaster® 6000 1.5HP jet pump that was used on the 1997-2000 Hot Spring Jetsetter, 1997-2000 Tiger River Sumatran and 1997 Tiger River Bengal spa models. This is the complete “Wet End” of the jet pump. Your Wavemaster 5000 (1.5 HP) jet pump is comprised of two main components: the electric motor and the “Wet End”. In some cases, this entire “Wet End Kit” is needed. Perfect remedy if your “Wet End” has cracked due to a severe freeze since neither of the two halves are available individually. The impeller and the shaft seal are still available. The front and top of this “Wet End Kit ” will attach to your existing compression fittings (aka pump union).

Installation: All “Wet End Kits” come pre-assembled from the factory. To install this kit you will need to disassemble it and re-assemble it one piece at a time onto your existing pump motor. Typical assembly time of this kit is two hours for the non-service tech.  After connecting the pump unions (compression fittings), the pump may not align with the holes that anchor the pump to the floor of the equipment compartment. You may need to re-anchor using no longer than 1″ lag bolts. When pre-drilling for those bolts, do not pre-drill more than 1/4″ into the floor of the equipment compartment or you may drill into plumbing lines.

Important information for replacement parts:
Please check the vendor code or pump model on your pump before ordering replacement parts and use the chart to determine the correct wet-end replacement. If your vendor code reads “4081“, see item 72993.

Wet end will work the following pump models:
0974001-03, 39583-03, 0974101-03
Wet End Impeller Shaft Seal Wear Ring
77710-BYP IMP-77710 77363 n/a

*Stamped on volute: GF30 & B653-11
**For volute-oring, see item 48WUA-V

View Diagrams & Part Compatibility

Reviews

There are no reviews yet.

Be the first to review “Wet End Kit, Watkins Wavemaster 6000 Jet Pump, 48 Frame, 1.5HP, SD, 2″MBT, After-Market”

Your email address will not be published.

Quality
Price
Service

Ref. Diagram
# 2 Jet Pump, Wavemaster XP2/LX (Solana 2003 - 2010) View Diagram
# 16 XP2/LX Jet Pump, Wavemaster (Solana 2003 - 2010) View Diagram
brand model years
Solana RX (RX) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Solana X (Indoor Only) (X) 2000, 2001, 2002
Hot Spot Dash (DAS) 2010, 2011, 2012
Hot Spot Mallorca (MAL) 2004, 2005, 2006, 2007, 2008, 2009
Hot Spot Mallorca (MALS) 2003, 2004, 2005, 2006, 2007, 2008, 2009
Hot Spot Pace (PAC) 2020
Hot Spot Relay (REL) 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Hot Spot Rhythm (RHY) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Hot Spot Sorrento (SOR) 2003, 2004, 2005, 2006, 2007, 2008, 2009
Hot Spot Sorrento (SORS) 2003, 2004, 2005, 2006, 2007, 2008, 2009
Hot Spot Sprint (SPR) 2010, 2011
Hot Spot SX (SX) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Hot Spot Trinidad (TRI) 2003, 2004, 2005, 2006, 2007, 2008, 2009
Hot Spot SLXtra (W) 2002
Hot Spot SLX (Y) 1998, 1999, 2000, 2001, 2002
Hot Spot SLX (YQ) 1998, 1999, 2000, 2001, 2002
Hot Spot RLX (ZQ) 1998, 1999, 2000, 2001, 2002
Hot Spot SX (SX) 2022, 2023
Solana TX-Solana (TX) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Hot Spot Pace (PAC) 2022, 2023
Hot Spot Relay (REL) 2022, 2023
Hot Spot Rhythm (RHY) 2022, 2023
Hot Spot Stride (STD) 2022, 2023

You may also like…

Customers also bought...