Always my go to for my hot tub parts, questions and how too videos Great customer service as wellOn 03/24/2023 by D. S. (verified customer)
Showing 1–30 of 51 results
-
Sku: 72727-BYP
Elbow, 3/4in X 3/4in Barbed with 1/4in Barbed Nipple
This 3/4" elbow with a 1/4" barbed nipple coming off of the curve of the elbow is most often found on the suction side of the Silentflo 5000 and 5002 circulating pumps The 3/4" x 3/4" x 1/4" bleed line fitting has a 1/4" nipple (30598) for the 1/4" vinyl ...read more -
Sku: 36159
Precision Jet Elbow
This elbow is used to glue onto the rear of the Precision Jet Body This elbow is an odd size and is not available at the local hardware store -
45 degree PVC elbow, 2", Spg X Slip
-
Sku: 34838
Elbow 1/2in Polybarb
This is a 1/2" 90-degree barbed elbow for use with clear 1/2" PVC tubing -
Sku: 34391
Elbow, Street 90 2in Spig X Slip
This is a 2" 90-degree street elbow made of PVC plastic  It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting  This allows for the elbow to be used in tighter spaces -
Sku: 30642
Elbow, 90 Degree 1/2in Slip X Slip
This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 90-degree angle  PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 300843
406-101 Red Elbow 3/4inX1/2in
Reducing 90-degree ell, 3/4" x 1/2", plumbing fitting -
Sku: 31932
Elbow, 90 Degree 2in Slip X Slip
This elbow is used to join two 2" male PVC slip fittings or 2" rigid or flexible PVC pipes together at a 90-degree angle  PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30643
Elbow, 90 Degree 3/4in Slip X Slip
This is a 3/4" 90-degree elbow made out of PVC which will accept two male 3/4" PVC flex or rigid pipes and join them together at a 90-degree angle using PVC primer and cement -
Sku: 33021
Elbow, 90 Degree 1-1/4in X 1in
This elbow is used to join a 1 1/4" male PVC slip fitting or 1 1/4" rigid or flexible PVC pipe to a 1" male PVC slip fitting or 1" rigid or flexible PVC pipe at a 90-degree angle  PVC primer and cement should be used to secure this fitting to the fittings ...read more -
Sku: 32423
Elbow, Inlet Jet Fixed
Elbow, inlet jet fixed -
Sku: 30650
Street Elbow, 90 3/4in Spig X Slip
This is a 3/4" 90-degree street elbow made of PVC plastic  It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting  This allows for the elbow to be used in tighter spaces -
Sku: 30645
Elbow, 90 Degree 1-1/2in Slip X Slip
This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 90-degree angle  PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Adapter, barbed ell, PVC, 1/2" hose x 1/4", male pipe thread
-
Sku: 30656
Elbow, 45 Degree 3/4in Slip X Slip
This elbow is used to join two 3/4" male PVC slip fittings or 3/4" rigid or flexible PVC pipes together at a 45-degree angle  PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 70906
Elbow/Union Assembly, Hot Spot
This assembly is used in two places on the 1993-1994 Hot Spot equipment compartment One of these assemblies connects onto the discharge (top) of the Wavemaster 3000 jet pump and the other end connects onto one side of the heater The second place is on the ...read more -
Sku: 70860
Reducing Elbow, Barbed,3/4in X 1/2in
This PVC elbow has a 3/4" barbed fitting glued on one end and a 1/2" barbed fitting glued into the other end It is most often used to reduce down from 3/4" vinyl tubing of an E5 circ pump to 1/2" vinyl tubing that connects to a pre-1989 Hot Spring heater ...read more -
This 4" high air control valve body elbow, located in the filter compartment, allows the spa user to control/adjust the amount of air that is supplied to all the hydrotherapy jets in the spa It works in conjunction with part 30724 The amount of air is ...read more
-
Sku: 30651
Street Elbow, 90 Degree 1in Spig X Slip
This is a 1" 90-degree street elbow made of PVC plastic  It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting  This allows for the elbow to be used in tighter spaces -
Sku: 32480
Elbow, 3/4in Poly Barbed
This is a 3/4" 90-degree barbed elbow for use with clear 3/4" PVC tubing -
Sku: 30649
Street Elbow, 90 1/2in Spig X Slip
This is a 1/2" 90-degree street elbow made of PVC plastic  It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting  This allows for the elbow to be used in tighter spaces -
Sku: 300615
416-020 ELL, 2-IN .22.5 Degree
416-020 ell, 2-in 22 5 deg -
Ell, 90, PVC, 3/4" Slip X 1/2" Fipt
-
Sku: 30659
Elbow, 45 Degree 1-1/2in Slip X Slip
This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 45-degree angle  PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30652
Elbow, 90 degree, 1-1/2in Spig X Slip
This is a 1 1/2" 90-degree street elbow made of PVC plastic  It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting  This allows for the elbow to be used in tighter spaces -
Sku: 20180
Barbed Adapter Elbow, Outlet 1/2in
This elbow adapts a 1/2" male pipe thread fitting to a 1/2" male barbed fitting  So a female pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Sku: 38411
427-015 Street Elbow 1-1/2 45 Degree
427-015 street elbow 1-1/2 45 degree -
This 3-1/2" high air control valve body elbow, located in the filter compartment, allows the spa user to control/adjust the amount of air that is supplied to all the hydrotherapy jets in the spa It works in conjunction with part 30724 The amount of air is ...read more
-
Sku: 70088
Elbow with 1/4″ Barbed Nipple
This kit includes a 90-degree elbow 3/4" barbed on one end and 3/4" female threads on the other Also included is a 1/4" nipple which is then glued into either side of the elbow All that is needed is a hole drilled into either side of the elbow using a ...read more -
Reducing elbow, 1x 3/4 slip x slip
Showing 1–30 of 51 results