Thank Goodness I found Backyard plus. They were able to diagnose the problem with my hot tub and after a few back and forth texts I'm enjoying the spa again. Saved me big $, and I did it myself.On 12/03/2024 by R. S. (verified customer)
Showing 1–30 of 159 results
-
Control panel cutout in redwood color for Hot Spring Envoy beginning in 2005 -
Sku: 73557Screw Cover Cream
Six of these screw covers are used to hold the equipment door in place on the Hot Spot TX from 2005 to 2010 These cream-colored caps attach to a plastic retainer that surrounds the head of the screw used to hold the door panel in place to provide a more ...read more -
Espresso colored screws found on the exterior synthetic wood paneling on all Limelight spa models This item is a quantity of 10 screws These screws are used on each side of the spa to mount the siding to the metal frame of the spa The screws are color ...read more -
Driftwood colored screws found on the exterior synthetic wood paneling on all Limelight spa models This item is a quantity of 10 screws One set of these screws is used on each side of the spa They are colored to match the color of the spa cabinet -
Sku: 74707Frame Inserts, Limelight
This kit has five inserts to replace stripped out inserts in the door or exterior panels on all Limelight Flair, Glow and Pulse spa models These inserts are used to accept the screws that hold the side panels for the spa to the frame of the spa 10 of ...read more -
Sku: 71617Everwood Control Panel Trim Kit
Trim kit of Everwood (synthetic wood) pieces that surround the control panel bezel (71509)on a third-quarter 1998-2000 Hot Spring Grandee and the control panel bezel (71510)on a 1999-2001 Sovereign -
Sku: 71480Redwood Cut Out, Hot Spring Jetsetter
This Redwood Kit has the opening cut-out for the Control Panel on all Hot Spring Jetsetter spas manufactured in 1998 -1999 -
Sku: 76052Logo Cutout, Gray, Hot Spring
Logo cutout, in gray, for Hot Spring models from 2009-2011 -
Logo cutout in espresso fro Prodigy and Sovereign models from 2009-2011 -
Sku: 76051Logo Cutout, Redwood, Hot Spring
Logo Cut-Out panel made of Synthetic Redwood, for Hot Spring Grandee and Vista years 2009 - 2011 -
Sku: 74790Exterior Screws, Autumn, Limeight
Autumn colored screws found on the exterior synthetic wood paneling on all Limelight spa models from 2008-2011 This item is a quantity of 10 screws These screws are color-matched to the paneling used on the outside of the spa -
Solid Wood Corner Brace with two vent holes - Hot Spring Spa This solid wood corner brace replaces either the front left/right corner brace which has two ventilation holes for the jet pumps The corner brace should be treated or painted, prior to ...read more
-
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Jetsetter from 2002 to 2004 and is synthetic material ...read more -
Sku: 73986Control Panel Cutout, Redwood, Vanguard
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Vanguard in 2006 to 2007 and is synthetic material in ...read more -
Sku: 73984Control Panel Cutout, Redwood, Jetsetter
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Jetsetter from 2005 to 2007 and is synthetic material ...read more -
Sku: 73982Control Panel Cutout, Redwood, Prodigy
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Prodigy from 2005 to 2007 and is synthetic material ...read more -
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Grandee and Vista from 2005 to 2007 and is synthetic ...read more -
Sku: 73605Wedge Control Panel Cut-Out Accolade
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Accolade in 2006 and is synthetic material in an ...read more -
Sku: 73462Wenge Control Panel Cutout, Prodigy
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Prodigy from 2004 to 2007 and is synthetic material ...read more -
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Vista from 2004 to 2007 and is synthetic material in ...read more -
Sku: 73374Stain Espresso
This stain is used on Hot Springs, Hot Spot, and Tiger River Spas It's used on spas with a synthetic espresso colored cabinet and is used to stain the areas of real wood that might be exposed in the equipment compartment to match the color of the synthetic ...read more -
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Landmark from 2000 to 2001 and is synthetic ...read more
-
Sku: 34362Screw, #10-32 X 1-1/2in, White Head
This white colored tipped 1-1/2" long screw secures the control panel in place on the 1994-1997 Hot Spring Classic spa model -
Sku: 71118
Control Panel Board, I-95
This is the wood slat kit used for the front of the spa, precut to allow for the shape of the control panel This kit was used for the 1995 Hotsprings Sovereign made from 1995 to 1997 -
Sku: 71121Control Panel Cutout, Prodigy
This is the wood slat kit used for the front of the spa, precut to allow for the shape of the control panel This kit was used for the Hotsprings Prodigy made from 1995 to 1997 -
This is the wood slat kit used for the front of the spa, precut to allow for the shape of the control panel This kit was used for the Hotsprings Highlife made from 1995 to 1997
-
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Grandee and Vista in 2005 to 2009 5 and is synthetic ...read more
-
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Prodigy in 2005 to 2009 5 and is synthetic material ...read more
-
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Jetsetter from 2005 to 2009 5 and is synthetic ...read more
-
This wood kit is used for the section of the front of the spa where the control panel is located The wood is precut to allow the installation of the control panel This kit was used on the Hot Springs Vanguard in 2006 to 2009 5 and is synthetic material ...read more
Showing 1–30 of 159 results