It was easy to find my replacement hot tub lights. The instructions were helpful. I fixed and repaired my broken tub light myself easy experience thank you backyard plusOn 02/13/2026 by K. K. (verified customer)
Showing 1–30 of 80 results
-
IQ 2020 Spa Control System "Eagle 2" for Hot Spring and Limelight spas beginning in 2024 What's included: Main control board "motherboard" and the heater relay board Not Included: This IQ 2020 spa control system comes from the factory as a blank ...read more -
IQ 2020 Spa Control System for most Hot Spring and Limelight spas beginning the 3rd quarter of 2012, and all Hot Spring and Limelight spa models beginning in 2013 What's included: Main control board "motherboard" and the heater relay board, four light ...read more -
Sku: 77873IQ 2020 Control Box Lid
This lid fits on all IQ 2020 Control boxes The Eagle Control box no longer comes with a lid, assuming the customer can re-use their old lid This is not always the case for our customers Sometimes lids get cracked or otherwise damaged and need to be ...read more -
Sku: 77271-BYPControl Box, IQ 2020 Spa Control System, Hot Spring, Tiger River, Limelight, PUG, 60 Hz
This IQ 2020 spa control system is the replacement for the discontinued IQ 2020 control box (73223 Invensys circuitry) that was used on all 2001-2009 5 Hot Spring, Tiger River, and Limelight spas This control box is also the retrofit upgrade replacement for ...read more -
This is the IQ 2020 spa control system also called "Hawk control box" made for most Hot Spot brand spas built in the 3rd quarter of 2012, and all Hot Spot models beginning in 2013 It houses the electronics and circuitry that interface the spa controls with ...read more -
This Gecko IN YJ 2 control box works on the Hot Spot Pace (PAC) and Stride (STD) models from 2022 to the end of the 1st quarter in 2023 It's used in conjunction with the following parts sold separately: 78448 Control Box 72093 Control Panel ...read more -
Sku: 77726-BYPControl Box, 1999-2005 Hot Spot and Solana Retrofit, Gecko IN.YJ 3 Series, 115/230 Volt, 60HZ, After-Market
The Gecko IN YJ 3 control box is part of the retrofit that replaces the discontinued S-Class control system This retrofit is for the following Hot Spot and Solana models: 1 Pump Systems Hot Spot 1999-2000 SE (Y) 1999-2002 RE (Z), RLX (Z/ZQ), SLX ...read more -
This Gecko IN YJ 3 control box used on 2022 Hot Spot Relay and Rhythm This control box is for a 2 pump system wired for 230 volts Specifications: 2 Pump 230v 60Hz -
Sku: 77726-INTCHWiFi Module, Gecko IN.YJ, inTouch 2
This wireless (WiFi) module allows you to connect your spa's control system to your home WiFi network to provide remote control access from your iPad, iPhone, Android or iPod device Find the in Touch 2 app in the Apple store or Google Play in Touch 2 is ...read more -
Sku: SERV-FLSH-VIRTUALControl Box Software Update: Hawk or Eagle sytems
Did you receive your control box from another dealer and open up the instructions only to find out you can't complete the installation without the proper software Did you purchase a new wireless remote and/or docking station and discover that now you need to ...read more -
Mounting bracket for 78448/77726/77726-BYP/77726-BUNDLE control boxes The aluminum Z-bracket is designed for flush-mounting the pack directly on the edge of the access door frame of you spa It can be mounted to the pack in one of 4 positions for greater ...read more -
Sku: 303550Harness, LED Light
This LED light harness is used with item 303307 multicolored light and is apart of the retrofit replacement parts that include: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older ...read more -
Sku: 303307LED Light, Multicolor, Hot Spot and Solana
This multicolor LED light is used with 78448 control box and is apart of the retrofit replacements parts listed below: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older control ...read more -
Heater connection wire kit, 8" long, 10 gauge wire, qty of 2 Connects from Hot Spot heater to board of S-Class series control box -
Grounding bar for the Hot Spot heater (after-market Gecko S-Class) 5 Position, 14-6 AWG This grounding bar is attached to the heater on Hot Spot and Solana brand spas and allows the pump and other accessories to have a secondary ground tied into the ...read more -
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more -
Sku: 72469Control Box, Hot Spot
Factory replacement control box for the 2003-2005 Hot Spot Mallorca, Sorrento, Trinidad & Tobago, and the 2002-2005 Caldera Oasis I & Oasis II spa models -
Sku: 37335Control Box, Hot Spot
Factory original control box found on the 1998 Hot Spot RE, RLX, SE, SLX, and SLXtra spa models It comes complete with the circuit board, GFCI, electronic t-stat, high limit thermistor, relays, and heavy-duty power cord -
Sku: 73223-Screw-BYPScrew, Front Cover of IQ 2020 Control Box
Screw, Front Cover of IQ 2020 Control Box (THPH SS 8-32X3/8') -
Sku: 30099Bushing, Strain Relief
This 3/8" strain relief is used to secure the jet pump(s), circulation pump, light and Ozonator power cords to the bottom of the IQ 2020 Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should ...read more -
This screw is used to hold the front cover of the IQ 2000 and IQ 2020 box in place This screw is not compatible on models made between 2007 and 2009 5 or older models with the upgraded heater relay board (Item #77119) The screw is too long and will hit ...read more -
Sku: 30098Strain Relief, Control Box, 3/8in
This strain relief is used to secure the circ pump and Ozonator's power cord to the bottom of the IQ Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Sku: 36044Plug, Hole, 0.50
This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more -
Sku: 36022Strain Relief 10/3
Heater strain relief used to secure the heaters power cord to the bottom of the IQ Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Sku: 36043Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off the unused OZONE or CIRC PUMP port helping to prevent bugs, dirt and debris from making a home inside the control box -
Sku: 30100Strain Relief Bushing, 1/2in
This bushing is used for strain relief of cords that are 1/2" in diameter, such as the cord for the heater in a Hotsprings, Tiger River, or LimeLight spa -
This screw is used for holding the IQ 2000 and IQ 2020 control boxes in place on the mounting bracket in Hotsprings, Tiger River, and Limelight spas -
Sku: 36018IQ Control Box Bracket
This aluminum bracket attaches to the spa door frame to enable the IQ Control Box to mount securely to this bracket The bracket does not come with the two 36898 screws that attach it to the control box Simple wood screws are used to attach it to the wood ...read more -
Sku: 34689Capacitor Assembly, Hot Spot – Z
This capacitor was used on the Hot Spot Z (round) model after serial number Z-240132 (2nd quarter 1994) Note: For serial numbers prior to Z-240133 use part number 70838 upgrade kit -
Sku: 30105Romex Clamp 3/4in
This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down
Showing 1–30 of 80 results