Fantastic selection and quick shipping. Craig in customer service has been excellent.On 05/30/2023 by C. W. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 262 results
-
Sku: 76836
Control Box, IQ 2020 Eagle 60HZ
Backordered until Late May per Factory Newest Control Box for most Hot Spring and Limelight spas beginning the 3rd quarter of 2012, and all Hot Spring and Limelight spa models beginning in 2013 If you are unsure if this is the correct control box for your ...read more$664.91 Select Options -
Sku: 76840
Control Box, Hot Spot
This is the Hawk control box made for most Hot Spot brand spas built in the 3rd quarter of 2012, and all Hot Spot models beginning in 2013 It houses the electronics that interface the spa controls with all the individual components of the spa If you are ...read more$482.66 Select Options -
What's Included: Motherboard,  pressure switch bypass jumper, and heater relay board installed in the IQ2020 plastic enclosure and also includes new style temperature sensors thermistors (79005 & 79006) and their o-rings Replacement for the ...read more
-
Factory replacement control box with heater for the now obsolete 71584 control box used on the 1999-2002 Hot Spot RE, RLX, SE, SLX, and 2001-2002 SLXtra and the Solana 2000-2002 X (triangle shaped), 2003-2005 Solana RX, SX, and TX spa models Note ...read more
-
Sku: 73859
IQ 2020 Control Box, Hot Spot and Solana
IQ 2020 control box for 2006 to 3rd quarter 2012 Hot Spot models and Solana spas beginning in 2006 Please be aware that the control panel that is compatible with this control box unit ("Cedric" system) is no longer available from the manufacturer Consider ...read more -
This control box replaces the now obsolete 76091 control box used on 2003-2005 Hot Spot wired for 115v, Solana 2003- 2005 and Hot Spot Spring 2010-2011 and Hot Spot Dash 2010-2012 hot tubs This entire retrofit will include: 78448 Control Box 72093 ...read more
-
Sku: SERV-FLSH-VIRTUAL
Control Box Software Update: Hawk or Eagle sytems
Did you receive your control box from another dealer and open up the instructions only to find out you can't complete the installation without the proper software Did you purchase a new wireless remote and/or docking station and discover that now you need to ...read more -
This is the PUG control box retrofit for international spas (50hz) Notes from manufacturer: When retrofitting Control Box or Control Panel, must also order appropriate control panel assembly and main light For 1994 models, also order PDR heater to replace ...read more
-
Sku: 77873
IQ 2020 Control Box Lid
This lid fits on all IQ 2020 Control boxes The Eagle Control box no longer comes with a lid, assuming the customer can re-use their old lid This is not always the case for our customers Sometimes lids get cracked or otherwise damaged and need to be ...read more -
Mounting bracket for 78448 control box It is also apart of the retrofit needed with these other replacement parts: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Light 303550 Light Harness
-
Sku: 303550
Harness, LED Light
This LED light harness is used with item 303307 multicolored light and is apart of the retrofit replacement parts that include: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older ...read more -
Sku: 303307
LED Light, Multicolor, Hot Spot and Solana
This multicolor LED light is used with 78448 control box and is apart of the retrofit replacements parts listed below: 78448 Control Box 72093 Control Panel 77358 Heater 78451 Bracket 303307 LED Multi-Color Lightcross compatible with older control ...read more -
Sku: 77119
IQ 2020 Heater Relay Board
This IQ2020 Heater Relay Circuit Board is the newest revision for the 2001-2009 5 IQ2020 Control Box It's upgraded design provides a more efficient method of connecting the heater's power cord to this board, therefore, reducing fatigue on the two "beefed up" ...read more -
This OEM replacement motherboard is for all IQ 2020 Control Boxes (77271) found on all 2001-2009 5 Hot Spring, Tiger River and Limelight spa models
-
Sku: 78039
Control Board, IQ2020, Orca 60HZ
This OEM replacement motherboard is for the Orca Box (76082), 115/220 VAC, used on 2009 Phase 2 through 3rd Quarter 2012 Hot Spring, Tiger River, and Limelight Note: The factory has obsoleted all control panel units (topside) that are compatible with the ...read more -
Sku: 72469
Control Box, Hot Spot
Factory replacement control box for the 2003-2005 Hot Spot Mallorca, Sorrento, Trinidad & Tobago, and the 2002-2005 Caldera Oasis I & Oasis II spa models -
Sku: 37335
Control Box, Hot Spot
Factory original control box found on the 1998 Hot Spot RE, RLX, SE, SLX, and SLXtra spa models It comes complete with the circuit board, GFCI, electronic t-stat, high limit thermistor, relays, and heavy-duty power cord -
Sku: 72768
Jumper, Pressure Switch, IQ2020
This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 control box The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After installing ...read more -
Replaces the obsolete 39525 and obsolete 39204 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 ...read more
-
Replaces the obsolete 39530 and obsolete 39205 Newly designed and includes o-ring This control thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard It simply screws ...read more
-
Replaces 38415 Newly designed and includes o-ring  This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs ...read more
-
Replaces 38416 Newly designed and includes o-ring  This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws ...read more
-
This newly designed high limit thermistor replaces the original black plastic-tipped version It is a safety device that will shut down power to the spa if the water temperature exiting the heater is too hot This would indicate a "low water flow" condition ...read more
-
This Control Thermostat Thermistor communicates the actual water temperature to the controller (control box motherboard) to shut off the heater when the spa reaches the target temperature It is used on all 73859, 72469, 76840 and 76091 control boxes
-
Sku: 34-01395-K
Thermistor, Control & Hi-Limit Sensor Kit, After Market
The after-market thermistor kit (1 control and 1 hi-limit sensor included with o-rings as well as adapters) that fit with either the 4kW or 6kW after-market PDR Titanium double-barrel heater These sensors can plug in directly to the motherboard located ...read more -
Sku: 30-01395-K
Thermistor Adapters, After-Market
The after-market thermistor adapters work to allow the after-market thermistors to connect to the outside of the control box instead of connecting directly to the motherboard of the control box -
Sku: 34878
O-Ring, Control Thermistor
Control Thermostat Thermistor o-ring for the 79006 and 78970 thermistors This o-ring is located on the "inlet" side of the heater and is the larger of the two thermistor o-rings For the outlet side of the heater see the part# 34879Â o-ring -
Sku: 73223-Screw-BYP
Screw, Front Cover of IQ 2020 Control Box
Screw, Front Cover of IQ 2020 Control Box (THPH SS 8-32X3/8') -
Sku: 34879
O-Ring, Hi-Limit Thermistor
High-Limit Thermistor o-ring for the 79005 and 78969 thermistors This o-ring is located on the "outlet" side of the heater and is the smaller of the two thermistor o-rings For the "inlet" side of the heater see part 34878 -
This electronic pressure switch is a safety device that will shut down the heater if a "low water flow" condition occurs It is used on Hot Spot models (except Sprint & Dash models) and Solana spa models  Some symptoms of failure include blinking ...read more
Showing 1–30 of 262 results