Perfect as always! No reason to go anywhere else for your spa parts.On 10/27/2023 by M. M. (verified customer)
Showing 121–150 of 1561 results
-
Middle door panel in espresso color for Hot Spot Relay (REL) and Rhythm (RHY) models beginning in the 4th quarter of 2012$493.46 Select Options
-
Sku: 78337
Front Corner Panel, Gray
Front corner panel in gray color for Limelight models Pulse and Prism beginning in 2018$35.72 Select Options -
This synthetic Coastal Gray slat is used on the 2002 to 2003 Limited Edition Highlife model spa from Hot Springs It is trimmed to be used to finish off the bottom of the horizontal slat sections on each side of the spa Serial number range ILE1D1001 - ...read more
-
Slat made of synthetic redwood colored material used on the cabinet in Hot Springs spas made 2008 to 2011 Wenge Quad 7-Plank$37.75 Select Options
-
Sku: 76022
Flat Slat, Synthetic Redwood, Hot Spring
Flat Slat, Synthetic Redwood Color, used on Hot Spring Spa Cabinets from 2008-2011 Wenge Quad 2-Plank$22.26 Select Options -
Sku: 72524-A
Single Verical, Slat, Everwood, Coastal Gray
This synthetic Coastal Gray slat is used vertically It is the most common piece used on the sides, back, front and doors on 2006-2007 Hot Spring Vanguard, Prodigy, Jetsetter, and Accolade spa models (V, VV, H,J, JJ, AC) 29 5 inches in length Check ...read more -
This part attaches onto the right side of the spa cover
-
Sku: 74707
Frame Inserts, Limelight
This kit has five inserts to replace stripped out inserts in the door or exterior panels on all Limelight Flair, Glow and Pulse spa models These inserts are used to accept the screws that hold the side panels for the spa to the frame of the spa 10 of ...read more -
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Sku: 72619
Tiger River Bartop Crack Repair
Crack repair kit used to repair crack in bar top and reinforce the area in order to prevent cracks from happening in the future on Tiger River spas made in late 1990's and early 2000's -
Sku: 71865
Tile, 3in Piece, White Spa
Tile, 3", White Endurol shell Tile strip measures 3" tall x 13 5" long and is adhered to the spa using GE Silicone and is grouted with the same -
Right side bracket (as you are facing the spa folding the cover away from you) for the Uprite cover lifter
-
Sku: 71789
Upright Side Bracket Assembly, Left Side
Left side bracket (as you are facing the spa folding the cover away from you) of the Uprite cover lifter -
Sku: 20018
Hinge, 7in
This door hinge was used on the Hot Spring spas -
Slat made of synthetic coastal grey material used on the cabinet in Hot Springs spas made 2008-2011
-
Sku: 75152
Upright Extension Tube
One pair (quantity of two) of extensions for the Uprite cover lifter -
Solid wood corner brace replacement, Hot Spring, no hole This is a solid wood corner brace that replaces the original plywood corner braces on most Hot Spring Spas It is recommended that the wood is painted, or treated, prior to installation
-
Solid wood corner brace with single vent hole - Hot Spring Spa This solid wood corner brace replaces either the front left/right corner with a single vent hole The corner brace should be treated or painted before installing
-
Sku: 71813
Everwood, Corner Slat, Hot Spring
This Everwood corner piece was used on the Hot Spring 3rd quarter 1998-2001 Grandee, 2000-2001 Landmark, 1999-2001 Sovereign, 2000-2001 Jetsetter & Prodigy and the 2001 Vanguard Four pieces are found on each corner -
Sku: 71646
Everwood, Corner Slat, Hot Spring
This Everwood corner piece was used on the Hot Spring 3rd quarter 1998-2001 Grandee & Landmark, 1999-2001 Sovereign, 2000-2001 Jetsetter & Prodigy and the 2001 Vanguard One piece is found on each corner -
Sku: 71617
Everwood Control Panel Trim Kit
Trim kit of Everwood (synthetic wood) pieces that surround the control panel bezel (71509)on a third-quarter 1998-2000 Hot Spring Grandee and the control panel bezel (71510)on a 1999-2001 Sovereign -
Sku: 71480
Redwood Cut Out, Hot Spring Jetsetter
This Redwood Kit has the opening cut-out for the Control Panel on all Hot Spring Jetsetter spas manufactured in 1998 -1999 -
32" long replacement unstained redwood slat found on the corners of all pre-1995 Hot Spring spa models Length: 32" Width: 1-3/4" Note: This replacement slat may require that you cut the length to fit your specific spa model
-
This slat is made out of Synthetic Grey Everwood material and is used on Hotsprings spas made from 2006-2009 5 This slat is used horizontally on the back, front, and sides of the spa and comes precut to 17 13" long
-
Sku: 73939-J
Flat Slat Tri 13.25in Coastal Gray
This slat is made out of Synthetic Grey Everwood material and is used on Hotsprings spas made from 2006-2009 5 This slat is used horizontally on the back, front, and sides of the spa and comes precut to 13 25" long -
Everwood Slat, Triple "T" Flat, Coastal Gray in color This synthetic slat is used on 2006 Hot Spring Spa Models The length is 32" and cut to size There is a "shorter" version of this slat, 73941-E, which is 17 13" Long$64.12 Select Options
-
Sku: 73942-A
Everwood 2 Piece Corner A
This is one of two redwood colored slat pieces used on the corners for all Hotsprings spas made from 2006 to 2009 5 It measures 32 inches in length and will need to be cut to length for smaller spas The other piece used on the corners is part number ...read more -
Sku: 73943-A
Everwood, 2 Piece Corner A, Gray Color
This is one of two grey colored slat pieces used on the corners for all Hot Spring spas made from 2006 to 2009 5 It measures 32 inches in length and will need to be cut to length for smaller spas The other piece used on the corners is part number ...read more -
Sku: 73944-A
Everwood 3 Piece Corner B
This is one of two redwood colored slat pieces used on the corners for all Hotsprings spas made from 2006 to 2009 5 It measures 32 inches in length and will need to be cut to length for smaller spas The other piece used on the corners is part number ...read more -
Sku: 73945-A
Everwood, 3 Piece Corner B, Gray
This is one of two grey colored slat pieces used on the corners for all Hot Spring spas made from 2006 to 2009 5 It measures 32 inches in length and will need to be cut to length for smaller spas The other piece used on the corners is part number ...read more
Showing 121–150 of 1561 results