Perfect as always! No reason to go anywhere else for your spa parts.On 10/27/2023 by M. M. (verified customer)
Showing 121–150 of 461 results
-
Sku: 30347
Screw, #10-24 X 1/2in Stainless Steel
Stainless steel screw -
Sku: 31397
Silicone, 14 Min. White
Silicone, 14 Minute White, Mildew Resistant Used in adhering decorative tile as well as for grouting the tiles Uses standard caulking gun applicator Requires the use of a cloth and rubbing alcohol to clean up edges after application -
Sku: 70867
Foam Pour 60 Lb.
This foam kit is used on the bottom of all Hot Spring and Tiger River spa models It gives the bottom of the spa the candy-like coating that helps deter critters from tunneling into the bottom of the spa Very short working time Covers approximately 6 to ...read more -
Sku: 70998
Large Crack Repair Mixing Kit
This mixing kit (adhesive sold separately) includes brushes, disposable mixing buckets, fiberglass and instructions to repair large cracks on the backside of the spa shell on Hot Spring, Tiger River, Hot Spot, and Solana spas The adhesive, 71024, is sold ...read more -
O-ring used in various water feature on/off valve assemblies This item is for a package of ten (10) o-rings For a single o-ring use part number 73484-1
-
Sku: 71525
Silicone, DOW 732 Clear, 3 oz.
100% clear silicone used to waterproof around various water features above the water line of the spa This item is available from most hardware stores for about the same price -
Sku: 20305
Heater Screws, package of 4
This kit contains four machine screws with phillips heads and four nuts that fit the machine screws These screws and nuts are used for the heaters used on the 110 volt model Hot Springs spas made from 1980 to 1994 -
Driftwood colored screws found on the exterior synthetic wood paneling on all Limelight spa models This item is a quantity of 10 screws One set of these screws is used on each side of the spa They are colored to match the color of the spa cabinet
-
Sku: 72017
Fastener, LED Light (Qty 4)
Fasteners used to hold the housing for the LED light assembly in place on Hotsprings, Tiger River, and Limelight spas These are included if you purchase a replacement light assembly -
Sku: 71965
Threaded Insert (Qty-6)
These threaded inserts are used on the equipment door of the Solana TX in the years 2000-2010 These screws are mounted on the frame of the spa and accept the stainless steel screws that are used to secure the equipment door in place -
This screw is used for holding the IQ 2000 and IQ 2020 control boxes in place on the mounting bracket in Hotsprings, Tiger River, and Limelight spas
-
Sku: 36018
IQ Control Box Bracket
This aluminum bracket attaches to the spa door frame to enable the IQ Control Box to mount securely to this bracket The bracket does not come with the two 36898 screws that attach it to the control box Simple wood screws are used to attach it to the wood ...read more -
This screw was used to hold the thermostat knob in place on the topside control panel used on Tiger River spas from 1992 to 1994 and the round-shaped air control knob on air valves used on Hotspring spas from 1989 to 1993 5
-
Sku: 30120
Lug, Grounding
Used on various components in the equipment compartment to provide a place for the grounding wire to attach to -
Sku: 30105
Romex Clamp 3/4in
This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Non-metallic hinge for all pre-1995 wooden Hot Spring equipment compartment doors (access doors)
-
Sku: 34304
Standoff, #10 – 32 X 1/2in
This standoff is found on the backside of the 1994-1997 Hot Spring control panels -
Sku: 70798
Warning Sign Kit
Warning / Safety Sign for all Watkins Manufacturing Spa Models This sign should be permanently posted near the spa where it is visible to all users of the spa -
Sku: 75007
Heater Flow Test Kit
This is a tool that is used by qualified Hotsprings Service Technicians to check the flow of water through the spa heater, to make sure there is adequate water flow for the heater to operate -
Sku: 77990
Cordset Cover
Cordset cover, HUB-MM410C -
Sku: 1481101
Niche Nipple Repair Tool Blank
Niche nipple repair tool -
Sku: 50554
Spanner Wrench Air Valve
Spanner wrench air valve -
Sku: 74707
Frame Inserts, Limelight
This kit has five inserts to replace stripped out inserts in the door or exterior panels on all Limelight Flair, Glow and Pulse spa models These inserts are used to accept the screws that hold the side panels for the spa to the frame of the spa 10 of ...read more -
Sku: 73451
Hardware Bag #1, Uprite Cover Lifter
Bag #1 for the upright cover lifter Contains the following: 2 x 1/4 x 20 5/8" Hex Bolts 2 x 1/4 x 1" Fender Washers 2 x 2 Hold Deck Hinge 10 x #10 Washers 8 x #10 1/2" Square Panhead Self Tapping Screws 10 x #10 1 1/2" Square Pan Tapping Screws 12 ...read more -
Sku: 72619
Tiger River Bartop Crack Repair
Crack repair kit used to repair crack in bar top and reinforce the area in order to prevent cracks from happening in the future on Tiger River spas made in late 1990's and early 2000's -
Lock washer for the diffuser screw on a Wavemaster 7000 (ver 2) and Wavemaster 9000 jet pump
-
Sku: 70335
Jet Install Tool
Jet tool for the removal of the wall fitting on the 34167 jet -
Sku: 20018
Hinge, 7in
This door hinge was used on the Hot Spring spas -
Sku: 70946
Impeller Screw, Wavemaster 9000
This stainless steel screw holds the impeller onto the Wavemaster 9000 jet pump shaft -
Flat Volute washer for the Wavemaster 7000 version 2 and he Wavemaster 9000
Showing 121–150 of 461 results