quick ship ,as described and was perfect transaction. ThanksOn 06/13/2024 by B. H. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 49 results
-
The Lift 'N Glide® is easy to install and ready to ship This lifter only requires fourteen inches (14") of rear clearance and three inches (3") on each side
-
Sku: 76078
ACE Chlorine Generator Cell
This is the replacement cell for the ACE Chlorine Generator cell This cell uses electrolysis to convert salt that is dissolved in the hot tub water into usable chlorine to sanitize the spa water Once the chlorine is used up, it basically recombines into ...read more -
Spa Frog® @Ease® SmartChlor® replacement Cartridge for the FROG® @Ease In-Line System How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® ...read more
-
@Ease® mineral cartridge for Spa Frog® for Hot Spot models beginning in 2019 How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® Cartridge ...read more
-
Spa FROG® @Ease® Smart Chlorine Test Strips Replaces item 77908 In 2 seconds, you can know precisely whether your pH, Total Alkalinity and Hardness are balanced, plus whether or not SmartChlor® needs replacing Simply dip the FROG® @ease® Test Strip ...read more
-
What's Included: (1) Spa Frog @ease Mineral Cartridge, (1) Spa Frog @ease SmartChlor Cartridge, (30) Spa Frog @ease Test Strips & (1) Frog Jump Start The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® ...read more
-
Spa Frog Cartridge Holder (Spa Frog Assembly), used on select Hot Spot Spas The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® Technology that maintains a consistently low chlorine level for weeks Unlike ...read more
-
Sku: 77044
Ace Cleaning Bottle
The cleaning bottle used to clean the Ace cartridge This bottle is the proper size to fit the Ace Chlorine Generation Cell for cleaning with vinegar or water with pH decreaser added, ie, acid The bottle is large enough for the entire cell to be submerged ...read more -
Sku: 76079
ACE Chlorine Generator Controller
This is a component of the ACE Chlorine Saltwater water sanitizer system This controller interfaces between the control box of the hot tub, the power supply for the chlorine generator cell and the chlorine generator cell itself This system is compatible ...read more -
Sku: 74880
Ace Multizone Power Supply
This is the power supply for the multizone lighting controller which controls the lighting behind the pillows, moto-massage niche as well as around the valve lever used from 2009-2012 It is also the power supply for the Ace Chlorine Generator -
Sku: 77401
Controller, Ace
Newer style ace controller for beginning in 2015, for tubs utilizing the ACE system -
This restrictor is used in Utopia and Paradise spas only with the Spa FROG® @ease® In-line system
-
Sku: 71775
Gliderite Base Tube Assembly, Rightside
The Gliderite has three black tubular bars (left, center and right) that fit together and form one long bar that mounts near the bottom base of the spa This tube is for the right-hand side only -
This right-side Corner Tube Assembly comes with the pivot collar and screw
-
Sku: 71751
Gliderite Bearing
This bearing is placed over the ¼” – 20 x 1” Hex Head Bolt -
This slot tube is found on both sides of the Gliderite and connects to the opposite end of the sidearm that is attached to the spa cover Illustration (# 11) on the Gliderite parts diagram
-
Sku: 71742
Bolt, #10 X 2-1/2in
OBSOLETE These bolts are used with washers to fasten the left and right Base Tubes on a Gliderite Illustration (# 5) on the Gliderite parts diagram -
Sku: 71744
Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Sku: 71217
Hex Head Bolt, 1/4in-#20 X 1in
This bolt is used to fasten the Slide Lock Bar to the Side Arm -
Sku: 71218
Bolt, #20 X 1/4in. X 2in. Hex Head
Attaches the sidearm to the pivot wheel on all spa models (except the Hot Spring Classic) -
Spa Frog® @ease® In-line system assembly collar for Hot Spot models
-
Sku: 74502
Spa Frog® @ease® In-Line System Housing
Spa Frog® @ease® In-line system housing used on Hot Spot models How does FROG® @ease® In-line System work The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® Technology that maintains a consistently ...read more -
Spa Frog cap for the FROG @ease In-line System in charcoal gray found on Hot Spot models beginning in 2020
-
Sku: 76299
Ace Retrofit Controller
OBSOLETE Retrofit controller for the Ace Salt System chlorine generator -
Obsolete: Use complete Lift n Glide Cover Lifter, 73071 This part is the entire right side hinge of the Lift 'N Glide cover lifter The hinge for the opposite side of the cover is different It does not include any parts from the Hardware Bag part ...read more
-
Sku: 72472
Gliderite Sidearm Assembly (Curved)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The curved side arm is a black 1" x 1" tubular piece that's used on both sides of the Gliderite Cover ...read more -
Sku: 71105
Bracket, Corner (G/K)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Bracket, Corner (G/K) -
Sku: 73166
Hardware Bag, Lift ‘N Glide
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Twenty stainless steel screws, 1 1/2" long used to attached the Lift 'N Glide cover lifter to the spa -
Sku: 72452
Side Hinge, 11/16in Base with Screw
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This side hinge screws into the vinyl cover and is used on the Gliderite & Cover Cradle cover lifters ...read more
Showing 1–30 of 49 results