I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Brand: Cover Cradle Ii, Gliderite, Lift N Glide, Point Of Light, Spaudio System
Showing 1–30 of 66 results
-
The CoverCradle® II has all the features of its big brother in a single pneumatic gas shock design Our customers who choose either of the CoverCradle® models don't have clearance issues and favor the lower resting point of the cover for increased ...read more -
The Lift 'N Glide® is easy to install and ready to ship This lifter only requires fourteen inches (14") of rear clearance and three inches (3") on each side -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more -
Sku: 72574Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 74034Gas Shock, Cover Cradle II
Replacement 60lb gas spring shock for all Cover Cradle II cover lifters from the makers of Hot Springs spas The gas shock color is black One of these shocks is used on the Cover Cradle II -
Sku: 78415LED Light Bulb Lens Kit
This LED light bulb lens kit replaces the 78051 LED bulb kit This LED light bulb lens kit is designed for accessibility from the front (front access) on Hot Spring models beginning in 2017 For the clear plastic housing on older models, see item 74415 -
Sku: 78052LED Point of Light Harness
LED point of light harness This is the front serviceable light found behind the pillows and moto-massage area For the light bulb with lens, see item 78415 -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP -
Sku: 72714Hardware Bag #2, Cover Cradle II
This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more -
This pivot assembly is for the left side of the Cover Cradle II cover lifter as you're facing the lifter from the front This arm attaches to the side of the cover with a bracket and screws The other end attaches near the base of the spa -
This ozone receptacle was introduced in 1995 on the Hot Spring and Tiger River control boxes They were eliminated in the beginning of 1997, only to be added back in the early second quarter of 1997 This receptacle is no longer needed with the new style of ...read more -
This pivot assembly is for the right side of the Cover Cradle II cover lifter as you're facing the lifter from the front It attaches to one side of the cover via a bracket and screws, and the other end attaches near the bottom of the edge of the spa -
Sku: 71775Gliderite Base Tube Assembly, Rightside
The Gliderite has three black tubular bars (left, center and right) that fit together and form one long bar that mounts near the bottom base of the spa This tube is for the right-hand side only -
This right-side Corner Tube Assembly comes with the pivot collar and screw -
Sku: 71751Gliderite Bearing
This bearing is placed over the ¼” – 20 x 1” Hex Head Bolt -
Sku: 71750Gliderite Slide Lock Bar
The Gliderite slide lock bar is used to lock the spa cover in the vertical position in wind prone areas -
This slot tube is found on both sides of the Gliderite and connects to the opposite end of the sidearm that is attached to the spa cover Illustration (# 11) on the Gliderite parts diagram -
Sku: 71742Bolt, #10 X 2-1/2in
OBSOLETE These bolts are used with washers to fasten the left and right Base Tubes on a Gliderite Illustration (# 5) on the Gliderite parts diagram -
Sku: 74080SpAudio II Sony Stereo Interface Cable
This cable allows the IQ2020 control box to communicate with the Sony Marine Stereo used in the Spaudio II Without this cable, the spas remote control or topside control cannot be used to operate the Sony Stereo -
Sku: 73928SpAudio II Sony System
Sony replacement unit for the SpAudio II sound system -
Sku: 73731SpAudio II Antena
This is the antenna used on the Spaudio II sound system This antenna allows for the radio to receive FM stations The antenna basically just lays down inside the equipment area but an extension can be added to place the antenna outside of the spa for ...read more -
Sku: 72853SpAudio Hardware Bag
Hardware for Spaudio -
Sku: 72715Hardware Bag #3, Cover Cradle II
This Cover Cradle II hardware bag #3 is only for spas with removable exterior panels and includes the following: #10 x 2" Stainless Steel Flat Head Screws (Qty 8) #10 x 2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware bag are ...read more -
Sku: 71744Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Sku: 71217Hex Head Bolt, 1/4in-#20 X 1in
This bolt is used to fasten the Slide Lock Bar to the Side Arm -
Sku: 71218Bolt, #20 X 1/4in. X 2in. Hex Head
Attaches the sidearm to the pivot wheel on all spa models (except the Hot Spring Classic) -
Obsolete and replaced by 78415 This LED light bulb lens kit is designed for accessibility from the front (front access) on Hot Spring models beginning in 2017 For the clear plastic housing on older models, see item 74415
-
Obsolete: Use complete Lift n Glide Cover Lifter, 73071 This part is the entire right side hinge of the Lift 'N Glide cover lifter The hinge for the opposite side of the cover is different It does not include any parts from the Hardware Bag part ...read more -
Sku: 74043SpAudio II Hardware
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This is the hardware kit for adding extra inputs to the Spaudio II sound system -
Sku: 74041Corner Housing, SpAudio II
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This housing is inserted into the corner of the Hot Spring cabinet to house the Sony stereo unit This ...read more
Showing 1–30 of 66 results