It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 33 results
-
Sku: 77726-BUNDLE
Gecko IN.YJ 3 Series Complete System, 1999-2005 Hot Spot and Solana After-Market Retrofit
The Gecko IN YJ 3 Series complete system is the retrofit used on: Hot Spot 1999-2000 SE (Y); 1999-2002 RE (Z), RLX (Z/ZQ), SLX (Y/YQ); 2001-2002 SLXtra (W/WQ); 2003-2005 Sorrento (SOR/SORS), Tobago (TOB), Trinidad (TRI); 2010-2012 Dash (DAS) Solana ...read more -
Sku: 36021
Program Jumper
This program jumpers can be found on the motherboard of all IQ 2000 and IQ 2020 Control Boxes Also used on the Interlock Timer Board (70821) -
This sensor fitting is installed through the side spa shell at the base of the hot tub near the suction and drain fittings on Hot Spot models beginning in 2020 Its purpose is to provide a watertight seal around the 72493 temperature control thermistor bulb
-
Sku: 76112
Thermistor Sensor Fitting, Hot Spot
This sensor fitting is installed through the side of the filter housing in all 1998-2005 Hot Spot brand spas Its purpose is to provide a watertight seal around the 71578 thermistor bulb -
Sku: 36021-x4-BYP
Program Jumpers (Qty of 4)
(Quantity of 4) Pack of program jumpers used on the motherboards of all IQ 2000 and 2001-2009 5 IQ 2020 Control Boxes Also used on the Interlock Timer Board ( 70821 ) -
Sku: 37727
Thermosensor Fitting, Solana
This thermo-sensor fitting is used to waterproof the temperature sensor (thermistor) that is located in the filter compartment of all Solana TX, RX and SX models -
Sku: 34934
Fuse 2 Amp 250V
2 amp 250v fuse for the 1995-1998 Hot Spot RE, RLX, SE, and SLX spa models as well as the 2009 forward IQ 2020 control boxes -
Sku: 72361
Fuse, Freshwater III, 1/2A 250V FAST-BLO
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Small size fuse used in the Freshwater 3 Ozonator unit -
Used on the 1995-1997 Hot Spot spas this fitting provided a flange for the cartridge-style heater element to seal against and a "dry-well" for the thermistor probe to slide into
-
Sku: 37089
Fuse SLOBLO 1/2A 250V 5x20in
This is a replacement fuse for the circulation pump line on IQ 2020 control boxes on all Hotsprings, Tiger River, and Limelight spas The fuse holder is mounted in the back of the control box near the circulation pump terminals on the circuit board A ...read more -
Kit includes both 6 3A and 8A fuse, 3pk each for Cool Zone
-
Sku: 34506
Fuseholder
Fuse holder houses the fuse for the older Freshwater II Ozonators and is also used to house the fuse for the circ pump circuit on IQ 2000 and IQ2020 control boxes -
Sku: 35196
Fuse, Freshwater II Ozonator
This is the fuse used to protect the Freshwater II Ozonator -
Sku: 71618
Fuse, 25Amp 300V Type SC-25
Slo-blo fuse used on the 71584, 73859, 72469, and 76840 control boxes for the pump and heater circuits -
Cable connector assembly for Khyber
-
Sku: 34500
Fuse 1.5A 230V Slo-Blo
One of two fuses used on the 70821 circuit board To test this fuse, remove it from the board and check the resistance from end to end If the fuse is good, the fuse should test closed with no resistance If it is bad, it should show an open circuit -
Sku: 302556
Fuse 2A 250V Slo-Blo
Replacement fuse found in the newest IQ 2020 control box on all 2012 5 Hot Spring and Limelight spas -
Sku: 70838
Capacitor Relay Upgrade Kit-Hot Spot Z
This upgrade kit is needed for the Hot Spot Z (round) model prior to Z-240133 (2nd quarter 1994) and comes with instructions for replacement from Z-330001 (3rd qtr 1993) to Z-240133 (2nd qtr 1994) Note: Factory photo shows that this includes a resistor ...read more -
Sku: 32452
Harness, Pcb 4T 115V 5Kw
Wiring harness for a 10-minute timer circuit board used on all models 1991 to 1993 Hot Springs spas The timer board is part number 71346 and is currently unavailable -
Sku: 0965201
FUSE, 750MA 250V
This is the small fuse used in control boxes found in most Hot Spot brand spas with Gecko control systems in them The fuse is located usually in the top right corner of the circuit board near where the spa light connects to the circuit board -
Sku: 74140
15A-ATC/ATO Blade Fuse
15A-ATC/ATO blase fuse -
Sku: 74139
IA-3AG Fast Acting Fuse
IA-3AG fast-acting fuse -
Sku: 71280
Thermowell, Hot Spot Square
Thermowell houses the temperature sensor for Hot Spot Square -
Sku: 70899
Thermowell Assembly
Thermowell houses the thermistor probe on a 1995-1997 Hot Spot spa models -
Sku: 34585
Slo-Blo Fuse, 1A 250V
Slo-Blo fuse, 1A 250V -
Thermowell housing for the t-stat temperature probe to insert into This thermowell aka "drywell" keeps the copper t-stat probe away from the chlorinated water so it doesn't dissolve
-
Cool gray temperature sensor fitting
-
Sku: 34499
Fuse 0.5A 230V Slo Blo
One of two fuses used on the 70821 circuit board To test this fuse, remove it from the board and check the resistance from end to end If the fuse is good, the fuse should test closed with no resistance If it is bad, it should show an open circuit -
Sku: 35201
Diode Assembly, Piggyback
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Diode Assembly, Piggyback
Showing 1–30 of 33 results