A wrong part was received. I reported the discrepancy, and the correct part was received 3 days later. This timely customer service.On 06/10/2024 by J. L. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 43 results
-
This OEM replacement IQ 2020 control board (motherboard) is for all IQ 2020 Control Boxes (77271) found on all 2001-2009 5 Hot Spring, Tiger River and Limelight spa models It is used on domestic 60hz model spas only
-
This OEM replacement IQ 2020 control board is for the Orca Box (76082) which has the Invensys circuitry, 115/220 VAC, used on 2009 Phase 2 through 3rd Quarter 2012 Hot Spring, Tiger River, and Limelight If your circuitry is marked with a blue label that says ...read more
-
Replaces the obsolete 39525 and obsolete 39204 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 ...read more
-
Sku: 79006
Thermistor, Control Thermostat, Watkins No Fault Heater, Hot Spring, Tiger River and Limelight
Replaces the obsolete 39530 and obsolete 39205 Newly designed and includes o-ring This control thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard It simply screws ...read more -
Replaces 38415 Newly designed and includes o-ring This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs ...read more
-
Replaces 38416 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws ...read more
-
This newly designed high limit thermistor replaces the original black plastic-tipped version It is a safety device that will shut down power to the spa if the water temperature exiting the heater is too hot This would indicate a "low water flow" condition ...read more
-
This Control Thermostat Thermistor communicates the actual water temperature to the controller (control box motherboard) to shut off the heater when the spa reaches the target temperature It is used on all 73859, 72469, 76840 and 76091 control boxes
-
Sku: 34-01395-K
Thermistor, Control & Hi-Limit Sensor Kit, After Market
The after-market thermistor kit (1 control and 1 hi-limit sensor included with o-rings as well as adapters) that fit with either the 4kW or 6kW after-market PDR Titanium double-barrel heater These sensors can plug in directly to the motherboard located ...read more -
Sku: 30-01395-K
Thermistor Adapters, After-Market
The after-market thermistor adapters work to allow the after-market thermistors to connect to the outside of the control box instead of connecting directly to the motherboard of the control box -
This is the after-market replacement thermistor for the 1999-2002 Hot Spot RE, RLX, SE, SLX, and the 2001-2002 SLXtra (wood-sided) spa models Also the Solana 2000-2002 X, 2003-2005 RX, SX, and TX models This thermistor communicates the actual water ...read more
-
This is the replacement thermistor for the 1999-2002 Hot Spot RE, RLX, SE, SLX, and the 2001-2002 SLXtra (wood-sided) spa models Also the Solana 2000-2002 X, 2003-2005 RX, SX, and TX models This thermistor communicates the actual water temperature to the ...read more
-
Sku: 36044
Plug, Hole, 0.50
This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more -
Sku: 36043
Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box -
Mounts in the control box on all Hot Spring models prior to 1997 that used a square receptacle The one-speed circulation pump (Silentflo 5000) plugs into this receptacle regardless of the voltage of your spa model All Hot Spring spa circulating pumps are ...read more
-
Sku: 10408
Receptacle, Jet Pump, Hot Spring
This jet pump receptacle mounts into the control box to provide an outlet to plug in the jet pump's power cord on the 1990-1996 Hot Spring Classic, Grandee, Highlife, Jetsetter, Prodigy & Sovereign spa models -
Sku: 34894
Jet Pump Receptacle
Jet Pump Receptacle (for two-speed pumps) used on Hot Spot spas prior to 1998 -
This PWA Control Panel Interface board is only found on the 1995-1996 Tiger River Khyber, Manora and Tondi spa models It is located inside the control box
-
Sku: 71974
PWA Main Circuit Board, Hot Spot
This PWA Main Circuit Board is the factory replacement for the 1998 Hot Spot RE, RLX (round), SE and SLX (square) models The picture may differ slightly from your circuit board due to revisions but this board will be a "Plug 'N Play" replacement -
This 220volt heater receptacle is located in the 1995-1996, 220volt Tiger River Manora & Tondi control box It provides a place to plug in the heater Over the years, this item can fatigue and require replacement For the 120volt receptacle see part 35114
-
Sku: 35112
Freshwater Ozone Receptacle, Tiger River
The female plug is installed in the control box and is used to plug in the Freshwater Ozonator on the Pre-1997 Tiger River Manora, Tondi & Khyber spa models -
Sku: 30170
Receptacle, Single – 20A 115V
Single receptacle, 20A 115V -
Sku: 34481
Screw Receptacle
Screw Receptacle -
Sku: 1316901
Control Box Plug, 1.093 Diameter
Plastic plug used to seal the largest unused round holes in the bottom of the IQ 2020 Control Box on all 2012 5 Hot Spring and Limelight spas These plugs keep critters from crawling into the control box -
Sku: 008019
Sensor Set, Oasis
High-limit and control thermostat sensor set for the Oasis spa models -
Sku: 39204
Thermistor, High-Limit, Hot Spring, Tiger River, Limelight
This item is obsolete and replaced by:
79005This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws into the No-Fault Heater Housing (hand tight only) and ...read more -
Sku: 39205
Thermistor, Control Thermostat, Hot Spring, Tiger River and Limelight
This item is obsolete and replaced by:
79006This control thermostat thermistor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws into the No-Fault Heater Housing (hand tight only) and ...read more -
Sku: 38415
Thermistor, Control Thermostat, Hot Spring and Tiger River
This item is obsolete and replaced by:
78970This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs into the outside of the spa's control box If your ...read more -
Sku: 38416
Thermistor, High-Limit, Hot Spring and Tiger River
This item is obsolete and replaced by:
78969This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws into the No-Fault Heater Housing (hand tight only) and ...read more -
Cool gray temperature sensor fitting
Showing 1–30 of 43 results