I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
Brand: Gliderite, Limelight, Solana, Wavemaster 3000, Wavemaster 7000 | Hardware: Screw
Showing all 25 results
-
This stainless steel screw is used to secure the Moto-Massage faceplate to its guide body on many Hot Spring and Solana spa models Also used on the 1995-1999 Hot Spring Dream Pillow Jet Check your serial number in the parts finder to be sure this part ...read more -
GECKO MODEL SCREW This stainless steel screw is used to attach the volute cover to the volute on most Wavemaster jet pumps -
Sku: 302637Door Screw, Hot Spot
This screw is used to attach the door(s) on all Hot Spot spas beginning in 2003 that use wood or synthetic wood siding: 1/4-20 x 1-3/4" Truss stainless steel Phillips head screw Price is per individual screw This part number replaces the obsolete 1-1/2" ...read more -
Stainless steel screw used to secure the heater to the equipment compartment floor on Hot Spring & Tiger River spa models Also used on the SilentFlo 5000 Circulation pump and to hold the Ozonator to the wall of the equipment compartment -
This screw is used to hold the front cover of the IQ 2000 and IQ 2020 box in place This screw is not compatible on models made between 2007 and 2009 5 or older models with the upgraded heater relay board (Item #77119) The screw is too long and will hit ...read more -
Sku: 30334Screw, #4 X 1/2in Stainless Steel
Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas -
Sku: 71892Screw 10-24 X 3/4in with Cap Retainer
Six of these screws are used on the Solana TX made from 2000 to 2010 to hold the equipment door in place These stainless steel screws are unique in that they come with a plastic retainer that surrounds the head of the screw designed to accept a plastic ...read more -
Impeller screw for the Wavemaster 7000 (v 1) This screw is reversed thread (left hand thread) This screw is not needed if you are purchasing a new impeller 2014 forward -
Espresso colored screws found on the exterior synthetic wood paneling on all Limelight spa models This item is a quantity of 10 screws These screws are used on each side of the spa to mount the siding to the metal frame of the spa The screws are color ...read more -
Driftwood colored screws found on the exterior synthetic wood paneling on all Limelight spa models This item is a quantity of 10 screws One set of these screws is used on each side of the spa They are colored to match the color of the spa cabinet -
This screw is used for holding the IQ 2000 and IQ 2020 control boxes in place on the mounting bracket in Hotsprings, Tiger River, and Limelight spas -
Sku: 39281Screw, Hot Spot Door, Cream
This screw is used on Hot Spot spas from 1998 to 2010 It is a stainless steel Phillips head screw with a pan head that has been painted to match the color of the skirting and door of the spa -
Sku: 74790Exterior Screws, Autumn, Limeight
Autumn colored screws found on the exterior synthetic wood paneling on all Limelight spa models from 2008-2011 This item is a quantity of 10 screws These screws are color-matched to the paneling used on the outside of the spa -
This hex screw runs through the flange of the motor into the seal plate on a Wavemaster 7000, second version and a Wavemaster 9000 jet pump They are used to hold the seal plate in place against the motor -
This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump -
Sku: 30360Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
Siding screw, stainless steel with gray finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown -
Siding screw, stainless steel with espresso finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown -
Siding screw, stainless steel with teak finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown -
Siding screw, stainless steel with sable finish for Hot Spot 2019 and Limelight 2019 302637- Stainless Steel 302637-1- Gray 302637-2- Espresso 302637-3- Teak 302637-4- Charcoal 302637-5- Sable 302637-6- Dark Espresso 302637-10- Brown -
Sku: 302635Screw, 1/4x20x1 3/4 Espresso, Stainless Steel
This item is obsolete and replaced by:
302637-2Espresso screw, 1/4x20x1 3/4 flat head, stainless steel -
Sku: 302634Screw, 1/4x20x1 3/4 Phillips Stainless Steel Gray
This item is obsolete and replaced by:
302637-1Gray screw, -1/4x20x1 3/4 flat head stainless steel -
Sku: 70404Diffuser Screw, 8-32 X 1in Phillips, Wavemaster 7000 V1
This item is obsolete and replaced by:
70951Obsolete: Factory replacement suggestion item 70951 This is the screw that secures the diffuser to the seal plate on a Wavemaster 7000 (v 1) pump -
Sku: 71215Screw, 1/4-20 x 3/4in for Side Hinge
Obsolete from the factory -Available at most hardware stores This #20 1/4in x 3/4" standard screw (stainless steel) that secures the sidearm to the base hinge -
Sku: 71216Screw, 1/4in X #20 Hinge Rear
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
Showing all 25 results