Hardware

Hardware: Bracket, Bushing Strain Relief, Mounting Kit

Showing 1–30 of 37 results

  • Z-Bracket, Control Box, Hot Spot and Solana
    Sku: 78451

    Z-Bracket, Control Box, Hot Spot and Solana

    Mounting bracket for 78448/77726/77726-BYP/77726-BUNDLE control boxes The aluminum Z-bracket is designed for flush-mounting the pack directly on the edge of the access door frame of you spa It can be mounted to the pack in one of 4 positions for greater ...read more
    $14.21
    Add to cart
  • Pillow Retainer Screw Kit
    Sku: 73019

    Pillow Retainer Screw Kit

    The plastic retainers in this kit come in two lengths: The short gray retainers are used if your pillows have remained in place over the years The gray extensions are used only if your pillows have fallen off often in the past
    $7.70
    Add to cart
  • Blade Mounted Pillow Retainer, Hot Spring/Limelight
    Sku: 74569

    Blade Mounted Pillow Retainer, Hot Spring/Limelight

    "Blade Mount" pillow retainer (set of two blades) for all Hot Spring spa pillows and all Limelight spa pillows beginning in the second quarter of 2007 Check the diagrams for the correct pillow retainer
    $16.52
    Add to cart
  • Hardware Bag #1, Cover Cradle
    Sku: 72574

    Hardware Bag #1, Cover Cradle

    This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more
    $12.80
    Add to cart
  • Bushing, Strain Relief
    Sku: 30099

    Bushing, Strain Relief

    This 3/8" strain relief is used to secure the jet pump(s), circulation pump, light and Ozonator power cords to the bottom of the IQ 2020 Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should ...read more
    $1.95
    Add to cart
  • Strain Relief 10/3
    Sku: 36022

    Strain Relief 10/3

    Heater strain relief used to secure the heaters power cord to the bottom of the IQ Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down
    $1.95
    Add to cart
  • Strain Relief Bushing, 1/2in
    Sku: 30100

    Strain Relief Bushing, 1/2in

    This bushing is used for strain relief of cords that are 1/2" in diameter, such as the cord for the heater in a Hotsprings, Tiger River, or LimeLight spa
    $1.52
    Add to cart
  • Hardware Bag #2, Cover Cradle II
    Sku: 72714

    Hardware Bag #2, Cover Cradle II

    This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more
    $5.97
    Add to cart
  • IQ Control Box Bracket
    Sku: 36018

    IQ Control Box Bracket

    This aluminum bracket attaches to the spa door frame to enable the IQ Control Box to mount securely to this bracket The bracket does not come with the two 36898 screws that attach it to the control box Simple wood screws are used to attach it to the wood ...read more
    $43.83
    Add to cart
  • Romex Clamp 3/4in
    Sku: 30105

    Romex Clamp 3/4in

    This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down
    $3.68
    Add to cart
  • Stain Espresso
    Sku: 73256

    Clarion Brackets

    These brackets are used to mount the Clarion Light Bars to the spa or step or where ever desired Five sets of left and right pairs are included in each pack
    $45.03
    Add to cart
  • Strain Relief
    Sku: 71614

    Strain Relief

    This strain relief is found on most LX jet pump models
    $7.44
    Add to cart
  • Strain Relief #3461
    Sku: 71613

    Strain Relief #3461

    Strain relief #3460
    $20.40
    Add to cart
  • Retainer Clip
    Sku: 71072

    Retainer Clip

    Used on the 1995-1999 Hot Spring Dream Pillow Neckjet
    $14.19
    Add to cart
  • Universal Bushing, .875in, Hot Spot Contol Box Assembly
    Sku: 37753

    Universal Bushing, .875in, Hot Spot Contol Box Assembly

    Universal Bushing, 0 875 inch, found in Hot Spot Control Box Assembly (37335)   This Bushing protects the Electronic T-Stat (75089) from the metal control box housing   This part can be found on the 1998 Hot Spot models
    $1.52
    Add to cart
  • Bushing, Snap 3/8in Outside Diameter
    Sku: 30102

    Bushing, Snap 3/8in Outside Diameter

    This bushing is used around openings through the control box used on pre-1997 Hot Springs spas where the copper tubes for the temperature probes and the cable for the spa power on light pass through
    $1.28
    Add to cart
  • Screw,6-32 X 3/8in Sems Stainless Steel Xt Pihd
    Sku: 34300

    Control Panel Mounting Plate, Hot Spring Classic

    Mounting plate found on the backside of all 1994-1997 Hot Spring Classic spas control panels
    $25.39
    Add to cart
  • Panel Frame Bracket, Limelight
    Sku: 78175

    Panel Frame Bracket, Limelight

    This panel frame is the bracket that is also considered the female piece for new Limelight all models beginning in 2018
    $4.21
    Add to cart
  • Panel Bracket 1x1 for Limelight
    Sku: 78412

    Panel Bracket 1×1 for Limelight

    Panel bracket for Limelight spas 1x1
    $43.31
    Add to cart
  • Z-Bracket, Control Box, Hot Spot and Solana
    Sku: 78451-BYP

    Mounting Bracket, IN.YJ Control Box, Hot Spot and Solana

    This item is obsolete and replaced by:
     78451
    Mounting bracket for IN YJ 2 AND IN YJ 3 control boxes Flat aluminum brackets are designed for back wall mounting There are 5 possible positions you can use Multiple brackets can be used if extra support is needed See also 78451 Z-bracket option
    Read More
  • Hardware Bag #2, Cover Cradle
    Sku: 72575

    Hardware Bag #2, Cover Cradle

    This item is obsolete and replaced by:
     72714
    Obsolete: Factory replacement suggestion item #72714 Hardware Bag #2 used on the Cover Cradle and Cover Cradle II   It contains screws for mounting the cover lifter to the spa and cover   All screws use Robertson (square drive) head bits
    Read More
  • Bracket, Corner (G/K)
    Sku: 71105

    Bracket, Corner (G/K)

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Bracket, Corner (G/K)
    Read More
  • Clarion Hardware Bag
    Sku: 73163

    Clarion Hardware Bag

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This hardware bag contains all of the hardware necessary to mount five Clarion Light Bars   It does not ...read more
    Read More
  • Bracket, Control Box Upgrade, Landmark
    Sku: 71302

    Bracket, Control Box Upgrade, Landmark

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This bracket is needed when replacing the entire Vista Series Control Box with the Obsolete 71382 IQ ...read more
    Read More
  • Bracket, Side 6-1/4in.
    Sku: 71102

    Bracket, Side 6-1/4in.

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Cover Cradle Side bracket is only used on the Hot Spring Landmark, Sovereign, Prodigy and Jetsetter ...read more
    $25.82
    Add to cart
  • Extrusion, Mount Clip, Model Z
    Sku: 34717

    Extrusion, Mount Clip, Model Z

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Extrusion, Mount Clip, Model Z
    Read More
  • Control Box Bracket, Tiger River Kyber, Siberian, Manora and Sumatran
    Sku: 33271

    Control Box Bracket, Tiger River Kyber, Siberian, Manora and Sumatran

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Bracket, Control Box, Tiger River, Pre-1995   This mounting bracket was used for all Tiger River ...read more
    $11.50
    Add to cart
  • Control Box Bracket, Hot Spring Classic
    Sku: 36019

    Control Box Bracket, Hot Spring Classic

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This bracket is used to secure the IQ 2000 Control Box inside the 1997-2000 Hot Spring Classic
    Read More
  • Bracket, Base, 90 Deg., Right
    Sku: 71087

    Bracket, Base, 90 Deg., Right

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
    Read More
  • Bracket, Base, 102 Deg., Right
    Sku: 71088

    Bracket, Base, 102 Deg., Right

    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
    Read More

Showing 1–30 of 37 results