The technical advice over the phone makes Backyard Plus the best source for Hot Springs repair parts. Oscar and Craig are truly experts and are so clear and patient with their troubleshooting and repair advice. Thanks!On 01/16/2024 by J. K. (verified customer)
Brand: Hot Spring, Hot Spring Pre 89, Limelight
Showing 121–150 of 208 results
-
Sku: 73740Leak Detection Kit
For Technicians Only Leak detection kit for Hot Spring, Hot Spot, and Limelight models -
Sku: 70825-BYPSnap Ring Pliers Tool, Smart Jet Diverter Valve
These snap ring ("c"-ring) pliers can be used to remove the snap ring on Smart Jet diverter valves (71494, 71495, 73768, 73769) found in most hot tubs Made of carbon steel and vinyl grip handles and comes with interchangable straight, 45 degree and 90 degree ...read more -
Sku: 70268Insulation, Fiberglass 36 X 65in
The insulation used to insulate the top of the equipment compartment in spas made prior to 2000 It is usually wrapped around the bottom of the spa step -
Sku: 72855Female Quick Disconnects (10)
These quick disconnects are used to adapt one male spade connector to be able to accept two female spade connectors Used a lot with the sound system installations It should not be used on higher amperage applications -
Sku: 30399Insert, Door, Classic F
-
Sku: 73789Adhesive (DP 601 NS)
This is Scotch Guard Urethane Adhesive used to repair missing slats from all spa cabinets Due to the high price of this product, and special application gun needed to use it, we recommend the use of Power Grab Heavy Duty Construction Adhesive instead ...read more -
Sku: 74790Exterior Screws, Autumn, Limeight
Autumn colored screws found on the exterior synthetic wood paneling on all Limelight spa models from 2008-2011 This item is a quantity of 10 screws These screws are color-matched to the paneling used on the outside of the spa -
Sku: 76034-2Flange Connectors, Hot Spring Lighted Logo
Set of two connectors (fasteners) that attach the backside of the lighted Hot Spring logo onto the side cabinet on all second quarter 2009 forward Hot Spring spa models -
Sku: 74130Dream Jet O-Ring, Cylinder Base
O-Ring, Cylinder Base 2001 Hot Spring Landmark Dream Jet Massage System -
Sku: 73374Stain Espresso
This stain is used on Hot Springs, Hot Spot, and Tiger River Spas It's used on spas with a synthetic espresso colored cabinet and is used to stain the areas of real wood that might be exposed in the equipment compartment to match the color of the synthetic ...read more -
Sku: 73256Clarion Brackets
These brackets are used to mount the Clarion Light Bars to the spa or step or where ever desired Five sets of left and right pairs are included in each pack -
Sku: 72715Hardware Bag #3, Cover Cradle II
This Cover Cradle II hardware bag #3 is only for spas with removable exterior panels and includes the following: #10 x 2" Stainless Steel Flat Head Screws (Qty 8) #10 x 2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware bag are ...read more -
Sku: 71072Retainer Clip
Used on the 1995-1999 Hot Spring Dream Pillow Neckjet -
This hex screw runs through the flange of the motor into the seal plate on a Wavemaster 7000, second version and a Wavemaster 9000 jet pump They are used to hold the seal plate in place against the motor -
This stainless steel screw secures the diffuser to the seal plate on the Wavemaster 7000 second version and the Wavemaster 9000 jet pump -
Bolt that secures the suction flange onto the front of the Wavemaster 7000 (v 1) -
Phillip head stainless steel screw, 8-18 x 3/8in for control panels on Hot Spring models 1994-1997 -
Sku: 34182Gasket, Silicone Jet 2-1/2in
Red silicone gasket (rubber gaskets dissolve in chlorinated water) fits behind the wall fitting nut and the spa shell on the 1993-1994 Hot Spot Z model spa and is used on the jet assembly on the 1995-1999 Hot Spring Dream Pillow Jet -
Sku: 33368Screw, 10-32 x 3/8in
This screw is used on Hotsprings Spas made from 1994 to 1996 to hold the plastic stand-off in place on the mounting plate from behind This stand-off accepts the screws from the front of the control panel that are used to hold the control panel in place -
Knob spring, for the rear side of the control panel, found on Hot Spring models from 1994-1997 -
Sku: 30369Screw, #6 X 5/8in Stainless Steel
Stainless steel screw, #6 x 5/8in, for the control panel on Hot Spring Models from 1989-1993 -
Sku: 30361Screw, Metal #10 X 3/4in
Metal screw, #10 x 3/4in, found on the control panel of Hot Spring models from 1989-1993 -
Sku: 30360Screw, 10 X 1/2in Stainless Steel
This screw used to mount bracket for Navigator Remote Control -
This screw is used to secure the volute to the pump base 70959 -
Stainless steel Phillips head sheet metal screw, 8x3/4in -
Sku: 33570Washer, #10 .200 X .359 X .063
Washer, #10 200 X 359 X 063 -
Mounting plate found on the backside of all 1994-1997 Hot Spring Classic spas control panels -
Sku: 34359Screw, #8-16 X 1/2in
Screw, #8-16 X 1/2in, found on control panels on Hot SPring models from 1994-1997 -
Sku: 34362Screw, #10-32 X 1-1/2in, White Head
This white colored tipped 1-1/2" long screw secures the control panel in place on the 1994-1997 Hot Spring Classic spa model -
Sku: 34481Screw Receptacle
Screw Receptacle
Showing 121–150 of 208 results