I find backyard plus sort of amazing.. Whenever I have a problem with my 18 year old tub (which is about ever 9 months or so) I can almost always go here and find parts. They describe how to troubleshoot to verify that this part might be broken and provide great videos on how to replace. When I jumped in the tub a few weeks back (and then jumped right out... it was cold!) I didn't hesitate, tracked down this part... verified it was a replacement and ordered it. Two days later I replaced it (my old board looked fine from the front but when I pulled it off you could see the charring on the back) and now the hot tub it happily working again! They are amazon-like in how fast they ship, have great support (the few times I had to call in with a question) and provide great example videos and written documentation -- if you are AT ALL handy you can totally maintain the hot tub yourself and backyard plus is a great partner. Regarding this specific part -- I had a 2006 model and the board was a different design but 100% fit with no problems -- The thing to test is ifs your HTR led is on there should be voltage (128v AC in my case) switched to the heater unit (the cables to the left of the board) -- mine registers about 2v AC so I suspected it was this board. As I mentioned when I replaced it you could see the charring on the backside and the new board is now happily working great.On 04/08/2024 by J. M. (verified customer)
Showing 31–60 of 106 results
-
This is the replacement air control valve lever (Cool Gray) for all 1993-2003 Hot Spring and 1999-2003 Tiger River spa models
-
This (Cool Gray) bezel fits at the base of the air control lever on all 1993-2003 Hot Spring and 1999-2003 Tiger River spa models It covers up the nut that is used to hold the valve in place
-
Sku: 32397
Jetstream Orifice, 1/2in
The orifice screws into the Jetstream Jet from inside the spa and it's purpose is to increase the pressure flowing out of the Jet Stream Jet -
Sku: 32395
Tee, Venturi Jetstream
The venturi tee is plumbed with an air line that adds air to the water flowing out of the Jetstream Jet nozzle to increase its force Sometimes a 38390 air check valve is added to this part using a 1/2" PVC coupling -
Sku: 73484-1
Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
White threaded Jet Stream wall fitting nut inserts through the spa shell and screws into the Jet Stream jet body on 1990-1993, 1997-2011 Hot Spring and Tiger River spas
-
Sku: 73316
On/Off Valve Handle, Cool Gray
This cool grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2010 that used cool grey jets and handles -
Sku: 73287
Precision Jet Kit (Rotary), Warm Gray
With this warm gray color kit you can turn your small directional style Precision Jets into rotary jets that will dazzle you with the way they feel "Warm Gray" is the color of jets used on copper, pearl, sand and champagne opal Hot Spring spas -
The cool gray bezel is the piece on the Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs & Tiger River spa
-
Sku: 71880
Rotary Jet, Taupe
Factory replacement taupe color rotary jet for Hot Spring, Hot Spot, and Solana spa models This jet has been redesigned from the "push-in style" to a "screw-in style" shown This redesign will prevent it from detaching from the holder unexpectedly The ...read more -
Warm Gray color and Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River and Solana spa models beginning in 2006 This jet provides a nozzle that can be swiveled to shift the direction of the water stream to customize the massage the jet ...read more
-
Sku: 36058
Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
Sku: 71361
Jet Body with Wallfitting
This kit includes the jet body, wallfitting, large wallfitting o-ring and small wallfitting o-ring for Hot Spring & Tiger River spas -
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
This warm grey Hot Spring Jet bezel is used on the on/off valves for the Amur, Bella Fontana, and Soothing Stream water features on Tiger River and Hotspring spas from 2003 to 2009 5 When screwed down, this bezels clamps down on an o-ring and creates a seal ...read more
-
Sku: 34437
Rotary Jet Nozzle Assembly, White
This white rotary jet and holder converts any adjustable jet into a spinning jet in a 1995-1996 Hot Spring Summit and 1995-1999 Landmark, all 1992-1996 Tiger River models, 1993-1994 Hot Spot Round (Z) and 1995-1996 Hot Spot2 (Y) models -
Sku: 33342
Retainer Ring, Jetstream Jet, Gray
The gray retainer ring holds the Jetstream Jet eyeball (nozzle) into place It simply screws into place hand tightened only Used on Tiger River and Hot Springs spas made from 1990 to 1993 -
Cool Gray color Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River, Solana and Hot Spot spas beginning in 2006 Usually used in a seat with 10 small jets or the 4 jets above the moto massage jet Check your serial number in the ...read more
-
Used on the 2006-2011 Hot Spring models that have cool gray fittings The face of the largest directional jet used in the spa This Faceplate also has a stainless steel trim crimped onto the face
-
This jet assembly includes the rear jet body, front wallfitting, and directional jet This can be found on Hot Spot models beginning in 2003
-
Sku: 74330
Jet Body, Rear
This jet assembly (jet body) is located on the backside of the spa shell on all 1994-1996 Tiger River Tondi/Sumatran, Manora & Khyber models as well as 1995-1995 Hot Spring Summit & Landmark models -
Sku: 35977
Wallfitting Front Nut
This white nut threads into the jet body that's located behind the spa shell -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
The silicone gasket/o-ring fits on the jet body 76525 that works with the directional hydromassage, soothing stream, jet stream and soothing seven
-
Wall fitting nut o-ring
-
Sku: 73846
Mini Jet Spinner Face, Cool Gray
This cool gray colored spinner converts a standard Precision Jet into a rotating jet on all 2006 forward Hot Spring, Tiger River, Solana, and Hot Spot spas -
This Precision Hot Spring Jet face is cool gray colored and includes a stainless steel trim for Hot Spring, Tiger River, and Solana models beginning in 2006 This version of the jet has a spinning insert to give a massaging action to the jet stream
-
Sku: 70819
Nozzle Retaining Ring, Jetstream, Gray
This is the Adjustable Jetstream Jet nozzle retainer ring in grey used to secure the nozzle within the jet face on 1994-1997 Hot Spring & Tiger River spa models -
This is the LED light (aka "Points of Light") assembly used on the waterfall feature on all 2008-2018 Limelight spa models
-
Sku: 73847
Precision Jet Face, Spinner, Warm Gray
This Precision Jet face is warm gray (faded taupe) colored for 2006 forward Hot Spring spas It is typically used as a carpal jet on the arm rests of a few models of spas, but can also be used to replace the neck jets where a different massage is desired
Showing 31–60 of 106 results