A wrong part was received. I reported the discrepancy, and the correct part was received 3 days later. This timely customer service.On 06/10/2024 by J. L. (verified customer)
Plumbing: Elbow, Jet Face, Tee, Wallfitting
Showing all 25 results
-
Sku: 36057Wallfitting, Rear, Precision Jet
Wall fitting (jet body) is installed behind the spa shell for the Precision Jet Both water and air lines feed this fitting The wall fitting nut (not included) inserts through the front of the spa shell and screws into this fitting with an o-ring positioned ...read more -
Sku: 36059Face, Precision Jet, White
White faceplate for the Precision Jet (mini-jet) for all white 1996-2003 Hot Spring spa models This part just snaps onto the wall fitting These are the faces for the small, fixed direction jets, usually located in clusters of 4 or 10 jets -
Sku: 37495Face, Precision Jet, Gray
Gray face for the Precision Jet (mini-jet) for all 1996-2003 Hot Spring & Tiger River spas, 2000-2003 Solana spas, and 2000-2002 Hot Spot spa models This part just snaps onto the wall fitting nut -
Cool Gray color and stainless steel trim Precision Hot Spring Jet face, eyeball and retainer for all Hot Spring & Tiger River spa models beginning in 2006 These are the smallest jets in the spa and are directional for a custom massage -
Sku: 36159Precision Jet Elbow
This elbow is used to glue onto the rear of the Precision Jet Body This elbow is an odd size and is not available at the local hardware store -
Sku: 36160Precision Jet Tee
This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store -
Sku: 38490Face, Precision Jet, Taupe
Taupe face for the Precision Jet (mini-jet) for 2002-2003 Hot Spring ILE, 2003 Hot Spring Vanguard & Grandee, 2000-2003 Solana TX and 2003 Solana RX & SX spa models This part just snaps onto the wallfitting -
Hot Spring jet, Warm Gray color and stainless steel Precision Jet face, eyeball and retainer for all Hot Spring spa models from 2006-2013 The plastic portion of the jet is warm gray color, with a stainless steel trim faceplate -
Warm Gray color and Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River and Solana spa models beginning in 2006 This jet provides a nozzle that can be swiveled to shift the direction of the water stream to customize the massage the jet ...read more -
Sku: 36058Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
This Precision Hot Spring Jet face is warm gray colored with stainless steel trim for Hot Spring, Tiger River, and Solana spa models beginning in 2006 It is part of the smallest jets used in the spa These jets are usually clustered in groups of 4 or 10 ...read more -
Cool Gray color Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River, Solana and Hot Spot spas beginning in 2006 Usually used in a seat with 10 small jets or the 4 jets above the moto massage jet Check your serial number in the ...read more -
Sku: 73846Mini Jet Spinner Face, Cool Gray
This cool gray colored spinner converts a standard Precision Jet into a rotating jet on all 2006 forward Hot Spring, Tiger River, Solana, and Hot Spot spas -
This Precision Hot Spring Jet face is cool gray colored and includes a stainless steel trim for Hot Spring, Tiger River, and Solana models beginning in 2006 This version of the jet has a spinning insert to give a massaging action to the jet stream -
Sku: 73847Precision Jet Face, Spinner, Warm Gray
This Precision Jet face is warm gray (faded taupe) colored for 2006 forward Hot Spring spas It is typically used as a carpal jet on the arm rests of a few models of spas, but can also be used to replace the neck jets where a different massage is desired -
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell -
Obsolete by factory: Use 36058 This is the Taupe color of the front portion of the wallfitting for the precision jets used on Solana and Hotspring spas from 2000 to 2003 It screws into the rear wallfitting to hold the assembly in place and sandwich the ...read more -
OBSOLETE- Use 73288 Warm gray jet face just pushes onto the wall fitting of a Precision Jet on all 2004-2005 Hot Spring, 3rd quarter 2003-2005 Tiger River and 2005 Solana spa models -
Obsolete: Factory replacement suggestion item #73272 -
OBSOLETE -Use the 73292 -
OBSOLETE-Use 73288 Cool gray jet face just pushes onto the wall fitting of a Precision Jet on all 2004-2005 Hot Spring, 3rd quarter 2003-2005 Tiger River and 2004-2005 Solana spa models -
Obsolete: Factory replacement suggestion item #73272 -
Sku: 37494Face, Precision Jet, White
Obsolete: Factory replacement suggestion item #36059 -
Sku: 36177Face, Precision Jet, Gray
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Obsolete: Factory replacement suggestion item #73287 This is the Taupe wall fitting for the Precision Jet used in Solana spas made from 2004 to 2005 This is the part that the retainer ring attaches to and the nozzle for the jet sits inside
Showing all 25 results