PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Plumbing: Adapter, Bushing, Check Valve, Piston, Plug, Screens Suction Covers, Tee, Union

Showing 1–30 of 152 results

  • Tubing Kit, Del-Ozone-1/4in with Check valve
    This 1/4" ID (3/8" OD)  ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more
    $20.12 View OEM
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more
    $55.00 View Generic
    Add to cart
  • Water Check Valve, 3/4 inch
    This 3/4" water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the backflow of water through the circulation pump once the jet pump is activated All water check valves have arrows stamped on the outside to indicate ...read more
    $8.25
    Add to cart
  • Check Valve (Air), Hot Spring, Tiger River, Limelight, Hot Spot
    Air check valve for Hot Spring, Tiger River, and Hot Spot spa models This check valve is located in the equipment compartment under the bartop Its primary function is to prevent water from back flowing into the equipment compartment should a hydrotherapy ...read more
    $20.09
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $6.36
    Add to cart
  • Compression Fitting O-ring, for 1-1/2 inch Union
    1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps   This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump   No Teflon tape is needed for the jet pump ...read more
    $3.26
    Add to cart
  • Drain Plug, Wavemaster
    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Sweep Pump Union, 2in Soc. 90 Degree
    Two-inch SOC 90deg sweep pump union
    $11.07
    Add to cart
  • Pump Union, 45 Degree
    Pump union (aka compression fitting) can be used to connect to any Wavemaster pump later than 1996   This union accepts a 2" PVC pipe and will attach to a 2" standard pump thread   The fitting for the pipe is at a 45-degree angle
    $10.09
    Add to cart
  • Check Valve, Air, with Ball 1/2in
    It is used to prevent water from backing into the airlines when the jets are off It is at the back of the Moto-Massage housing and glued into a 90-degree elbow It is also on the jetstream jets
    $1.74
    Add to cart
  • Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
    Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard
    $19.53
    Add to cart
  • Precision Jet Tee
    This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store
    $14.43
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • Adapter, 3/4in Barbed X 3/4in Slip
    This barbed fitting is primarily used to connect 3/4" vinyl tubing to various places within the circulating/heating system of Hot Spring & Tiger River from 1990 forward This PVC fitting is often found glued into a 90-degree elbow rising from the floor of ...read more
    $1.74
    Add to cart
  • Air Control Valve Piston W/O-Rings, Hot Spring 1993-2003/Tiger River 1999-2003
    Air control valve piston for all 1993-2003 Hot Spring and 1999-2003 Tiger River spa models Reference: 33837
    $16.56
    Add to cart
  • Air Control Valve Piston
    The piston turns by the valve lever to increase or decrease the airflow to the jets It is used on Hot Spring, Tiger River, Hot Spot, Solana, and Limelight spa models
    $9.44
    Add to cart
  • Adapter, 3/4in Sp X 1/4in Sp
    This adapter glues into a 3/4" female PVC slip fitting using PVC primer and cement and accepts a 1/4" vinyl hose that can be secured using PVC cement as well or a hose clamp
    $2.06
    Add to cart
  • 449-020 2in Plug
    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Drain Screen, Hot Spring and Hot Spot, White
    BACKORDERED WITH THE FACTORY - NO CURRENT ETA This perforated screen (grill) has many small holes to prevent debris from clogging the floor drain This screen simply unscrews from the 1-1/2" threaded floor fitting
    $16.96
    Add to cart
  • Air Check Valve Tiger River and Hot Spring Pre-1997
    This air check valve is located in the equipment compartment, up high, under the bar top If a hydrotherapy jet should become obstructed (like when a guest sticks their finger in the jet), this item becomes critical in preventing water from back flowing into ...read more
    $24.28
    Add to cart
  • Hartford Loop Assembly
    This retrofit kit is used to replace the air check valve that was used in some Hot Spring spa models This kit replaces the obsolete 72342 Check your serial number in the parts finder above to be sure this part is for your spa
    $71.07
    Add to cart
  • Bypass Tee
    This assembly is found on all Tiger River spas This 3/4" x 1/2" tee has 3/4" male barbed fittings on each end and a 1/2" barbed male fitting on the elbow It is located in front of the circulation pump between the check valve (35233) and the inlet of the ...read more
    $23.43
    Add to cart
  • Water Check Valve, 1-1/2" Inside Diameter, 2in Outside Diameter
    This "Jet System" check valve is used on all Hot Spring models and all Tiger River spas This check valve engages when the diverter valve is changed to different positions For convenience, the inside diameter of this check valve is 1-1/2" and the outside ...read more
    $29.48
    Add to cart
  • Adapter, 3/4in X 3/4in Mht X Slip
    This PVC fitting glues on to a 3/4" male PVC rigid or flexible pipe and allows a 3/4" female pipe thread to connect to it   On Hotsprings and Tiger River spas, it's used as part of the drain system, to allow a garden hose to be connected and water to be ...read more
    $10.46
    Add to cart
  • Air Control, Piston/Driver
    ON BACKORDER WITH NO CURRENT ETA - The main air control valve component regulates the airflow to the jets when the lever is turned on all 1989-1993 Hot Spring spa models
    $17.03
    Add to cart
  • Safety Suction Grate, Cool Gray
    This new style safety suction grate is the replacement for all previous suction grates in all Hot Spring, Tiger River, Solana, and Hot Spot spas This grate screws into the new style safety suction wall fitting
    $8.86
    Add to cart
  • Drain Screen, Warm Gray, Hot Spring and Solana spas
    Warm gray-colored drain screen for Hot Spring and Solana spa models This perforated screen (grill) has many small holes to prevent debris from clogging the floor drain This screen simply unscrews from the 1-1/2" threaded floor fitting
    $24.08
    Add to cart
  • Kynar Hose Barb 1/8in x 1/4in, For Newstyle 72602
    This coupling is made from an ozone resistant plastic called Kynar It is connected to the side of the newest style of Freshwater III Ozonator, 72602 The ozone tubing connects onto this barbed fitting If your barbed fitting breaks off, this factory ...read more
    $4.32
    Add to cart
  • Safety Suction Wall Fitting
    This new style safety suction wall fitting is the replacement for all previous suction wall fittings in all Hot Spring, Tiger River, Solana, and Hot Spot spas The safety suction grate (75146 or 75147 ) screws into this new style safety suction wall fitting
    $21.60
    Add to cart
  • Check Valve, Safety Suction
    This check valve's function is to "open" when someone puts their hand over the jet pumps suction fitting within the filter intake This check valve will "open" drawing air into it from the equipment compartment, thereby stopping suction of the jet pump This ...read more
    $43.01
    Add to cart

Showing 1–30 of 152 results