PLUMBING

Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.

Plumbing: Cap, Check Valve, Elbow, Valve Body

Showing 1–30 of 104 results

  • Tubing Kit, Del-Ozone-1/4in with Check valve
    This 1/4" ID (3/8" OD)  ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more
    $20.12 View OEM
    Add to cart
  • Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
    This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more
    $55.00 View Generic
    Add to cart
  • Water Check Valve, 3/4 inch
    This 3/4" water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the backflow of water through the circulation pump once the jet pump is activated All water check valves have arrows stamped on the outside to indicate ...read more
    $8.25
    Add to cart
  • Check Valve (Air), Hot Spring, Tiger River, Limelight, Hot Spot
    Air check valve for Hot Spring, Tiger River, and Hot Spot spa models This check valve is located in the equipment compartment under the bartop Its primary function is to prevent water from back flowing into the equipment compartment should a hydrotherapy ...read more
    $20.09
    Add to cart
  • Cap, Drain Valve - 3/4in with Washer
    Black 3/4" hose bib thread cap used on the drains of 1993 forward Hot Spring, Tiger River, Hot Spot, and Solana, and Limelight spa models   It also includes the washer   This cap is used both on the "Primary" Drain Valve, and the "Secondary" Drain Valve
    $1.70
    Add to cart
  • Precision Jet Elbow
    This elbow is used to glue onto the rear of the Precision Jet Body This elbow is an odd size and is not available at the local hardware store
    $3.24
    Add to cart
  • Check Valve, Air, with Ball 1/2in
    It is used to prevent water from backing into the airlines when the jets are off It is at the back of the Moto-Massage housing and glued into a 90-degree elbow It is also on the jetstream jets
    $1.74
    Add to cart
  • Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
    Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard
    $19.53
    Add to cart
  • Diverter Body, 2-Port
    This is a replacement valve body for 1994-2008 Hot Spring, Tiger River and all Limelight spa models with two-port diverter valves This valve body has 2" diameter ports and replaces the original black valve body
    $30.05
    Add to cart
  • 6 Port Diverter Valve Body
    This 6 port diverter valve body is used on the Hot Spring and Tiger River spa models that utilize a four-position valve
    $46.00
    Add to cart
  • Cap, Air Control, Jet Selector, Gray
    This gray cap fits on the top of the air control lever to hide the stainless steel screw This cap is also used on the water diverter levers (Smart Jet Selector) white on white spas and gray on all other colored spa shells
    $1.52
    Add to cart
  • Cap, Air Control/Jet Selector, White
    This white cap fits on the top of the 1993-2003 Hot Spring Comfort Control air lever to identify it as the Comfort Control Lever for the Moto-Massage Jet on white-colored Hot Spring models only Note: Also used as an upgrade for the colored dots (sticker) ...read more
    $6.84
    Add to cart
  • Air Check Valve Tiger River and Hot Spring Pre-1997
    This air check valve is located in the equipment compartment, up high, under the bar top If a hydrotherapy jet should become obstructed (like when a guest sticks their finger in the jet), this item becomes critical in preventing water from back flowing into ...read more
    $24.28
    Add to cart
  • Hartford Loop Assembly
    This retrofit kit is used to replace the air check valve that was used in some Hot Spring spa models This kit replaces the obsolete 72342 Check your serial number in the parts finder above to be sure this part is for your spa
    $71.07
    Add to cart
  • Water Check Valve, 1-1/2" Inside Diameter, 2in Outside Diameter
    This "Jet System" check valve is used on all Hot Spring models and all Tiger River spas This check valve engages when the diverter valve is changed to different positions For convenience, the inside diameter of this check valve is 1-1/2" and the outside ...read more
    $29.48
    Add to cart
  • Street Elbow, 2in, 45 Degree, Spigot X Slip
    45 degree PVC elbow, 2", Spg X Slip
    $7.00
    Add to cart
  • Check Valve, Safety Suction
    This check valve's function is to "open" when someone puts their hand over the jet pumps suction fitting within the filter intake This check valve will "open" drawing air into it from the equipment compartment, thereby stopping suction of the jet pump This ...read more
    $43.01
    Add to cart
  • Cap, Lever/Bezel, Quarite Teal
    Lever cap in teal
    $1.74
    Add to cart
  • Street Elbow, 2in, 45 Degree, Spigot X Slip
    Drain valve black cap, washer and ring assembly used on 2004 forward Hot Spring and Tiger River spa models
    $19.86
    Add to cart
  • Check Valve, with Spring, 1-1/2in
    1-1/2" spring style check valve is commonly found between the jet pump and filter housing on Tiger River spas This check valve automatically closes when the Tiger River spas jet pump is turned off so the circulation pump (Silentflo 5000) can then draw water ...read more
    $37.41
    Add to cart
  • Elbow 1/2in Polybarb
    This is a 1/2" 90-degree barbed elbow for use with clear 1/2" PVC tubing
    $8.25
    Add to cart
  • Diverter Valve Wallfitting Nut
    This is a 2" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $10.88
    Add to cart
  • Valve Body, Air Control
    Air control valve body used on all Hot Spring spas from 1989-mid 1993 This part is found under the bar top on the backside of the spa shell   It is sealed to the bottom of the bar top using an o-ring so that water splashed on it does not leak into the ...read more
    $4.23
    Add to cart
  • Elbow, 90 Degree 1/2in Slip X Slip
    This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $4.79
    Add to cart
  • Diverter Valve Wallfitting Nut
    Reducing 90-degree ell, 3/4" x 1/2", plumbing fitting
    $6.60
    Add to cart
  • Elbow, 90 Degree 2in Slip X Slip
    This elbow is used to join two 2" male PVC slip fittings or 2" rigid or flexible PVC pipes together at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $8.14
    Add to cart
  • Elbow, 90 Degree 3/4in Slip X Slip
    This is a 3/4" 90-degree elbow made out of PVC which will accept two male 3/4" PVC flex or rigid pipes and join them together at a 90-degree angle using PVC primer and cement
    $2.11
    Add to cart
  • Manifold, Flow Cone
    This elbow is used to join a 1 1/4" male PVC slip fitting or 1 1/4" rigid or flexible PVC pipe to a 1" male PVC slip fitting or 1" rigid or flexible PVC pipe at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings ...read more
    $6.18
    Add to cart
  • Diverter Valve Body, 1-1/2in
    Replacement valve body for Hot Spring spa models manufactured prior to 1994 This gray valve body has 1-1/2" diameter ports   This valve body typically sits above the jet pump for diverting water from one area of the spa to the other   Use with Valve Insert ...read more
    $57.51
    Add to cart
  • Manifold, Flow Cone
    This is part of the air control valves used on Hotspring and Tiger River spas from 1999 to 2003   It is where the moving portion of the valve resides and where the plumbing connects to the valve, as well as provides a way to mount the valve to the shell of ...read more
    $3.24
    Add to cart

Showing 1–30 of 104 results