It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.
Showing 1–30 of 112 results
-
Two-position cool gray color Smart Jet selector lever & bezel for all 1998 forward Hot Spring & Tiger River spa models that have a two-position Smart Jet diverter valve This upgraded lever & bezel replaces the obsolete 71610 Check your serial ...read more
-
Sku: 73804
Air Control Lever, Cool Gray
This is the control lever (Cool Gray) for Hot Spring, Tiger River, Limelight and Hot Spot spa models -
Sku: 30237-x2-BYP
Compression Fitting O-ring, for 1-1/2 inch Union (Qty. of 2)
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more -
1-1/2" compression coupling (pump union) o ring for some Wavemaster jet pumps and all Starite pumps This o-ring should typically be replaced when removing the jet pump for repair and reinstalling the jet pump No Teflon tape is needed for the jet pump ...read more
-
Sku: 32267-1
Drain Plug, Wavemaster
This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more -
Sku: 301488
Sweep Pump Union, 2in Soc. 90 Degree
Two-inch SOC 90deg sweep pump union -
Sku: 1119401
Pump Union, 45 Degree
Pump union (aka compression fitting) can be used to connect to any Wavemaster pump later than 1996 This union accepts a 2" PVC pipe and will attach to a 2" standard pump thread The fitting for the pipe is at a 45-degree angle -
This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
-
Sku: 37704
Diverter Body, 2-Port
This is a replacement valve body for 1994-2008 Hot Spring, Tiger River and all Limelight spa models with two-port diverter valves This valve body has 2" diameter ports and replaces the original black valve body -
Sku: 37297
6 Port Diverter Valve Body
This 6 port diverter valve body is used on the Hot Spring and Tiger River spa models that utilize a four-position valve -
Sku: 33834
Lever, Air Valve, White, Hot Spring
This is the replacement air control valve lever for all 1993-2003 Hot Spring spa models (White) -
Sku: 31421
Control Air Lever, Hot Spring
Air control lever for 1989-1993 Hot Spring spa models (White) -
Sku: 11080
449-020 2in Plug
This is a 2" PVC plug It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement You can get PVC cement at your local hardware store -
Air control lever (Charcoal Gray) for Hot Spring & Hot Spot spa models Reference number 1774501
-
Air control lever (Warm Gray) for Hot Spring & Hot Spot spa models
-
Sku: 75121
Comfort Control Lever, Cool Gray
Lever in cool gray color for the 2009-2013 Comfort Control (aka air control valve) -
Sku: 73327
On/Off Valve Handle Warm Gray
This warm grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2009 that used warm grey jets and handles -
This is the replacement air control valve lever (Cool Gray) for all 1993-2003 Hot Spring and 1999-2003 Tiger River spa models
-
Sku: 36503
Bezel, Air Valve, White, Hot Spring
This bezel fits at the base of the air control levers on all 1993-2003 Hot Spring spa models (White) -
Sku: 34311
Lever, Diverter Valve, Hot Spring
Diverter lever (white) for all 1994-1997 Hot Spring spa models -
This (Cool Gray) bezel fits at the base of the air control lever on all 1993-2003 Hot Spring and 1999-2003 Tiger River spa models It covers up the nut that is used to hold the valve in place
-
Sku: 76006
Comfort Control Lever, Warm Gray
Lever in warm gray color for the 2009-2013 Comfort Control (aka air control valve) -
Sku: 75122
Comfort Control Bezel, Cool Gray
Bezel (round trim piece) in cool gray color for the Comfort Control (aka air control valve) Check your serial number in the Parts Finder to be sure this part is for your spa -
Sku: 73316
On/Off Valve Handle, Cool Gray
This cool grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2010 that used cool grey jets and handles -
Sku: 76007
Comfort Control Bezel, Warm Gray
Bezel (round trim piece) in warm gray color for the Comfort Control (aka air control valve) -
This reinforced upgraded replacement lever is for all pre-1994 Hot Spring spa models that have a diverter valve
-
This warm grey Hot Spring Jet bezel is used on the on/off valves for the Amur, Bella Fontana, and Soothing Stream water features on Tiger River and Hotspring spas from 2003 to 2009 5 When screwed down, this bezels clamps down on an o-ring and creates a seal ...read more
-
This is the cool grey set of 3 bezels for the BellaFontana water feature used in certain Hot Springs spa models beginning in 2023 Three of these are included in the kit One is used on each stream of the fountain GRANDEE, ENVOY, VANGUARD, ARIA, ...read more
-
Sku: 72278
Diverter Valve Bezel, Hot Spot Sorrento
This bezel is located under the diverter valve lever on all 2003-2009 Hot Spot Sorrento spa models -
Sku: 34310
Bezel, Smart Jet Valve, 2in, Hot Spring
(Ref #3a) This white Smart Jet selector bezel fits below the jet selector diverter valve lever on all white colored 1994-1997 Hot Spring spa models It covers the screws and snap ring that hold the actual valve in place
Showing 1–30 of 112 results