Great customer service. Fast shipping and exactly what I needed.On 05/09/2024 by D. A. (verified customer)
Plumbing: Check Valve, Compression Fitting, Handles Knobs Levers Bezels, Inlet, Plug, Restrictor, Screens Suction Covers, Split Nut, Valve Body, Wallfitting, Water Manifold
Showing 61–90 of 203 results
-
Sku: 77234Hot Spring Jet Air Control Bezel
Hot Spring Jet Air control bezel for Hot Spring spas beginning in 2014 -
Sku: 72072-1.5Split Nut for 1.5in Compression Fittings
This 1-1/2" split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age, and over-tightening The two halves of this fitting are held together by two screws -
Sku: 75127Bezel, On/Off Valve, Cool Gray
This bezel, cool grey colored, is used for the on/off valve for the fountain on Hot Springs spas The bezel covers up the actual valve, and the stem for the valve sticks up through this bezel so the handle can be attached -
This threaded wall fitting is located in the bottom of the filter compartment on all 1997-2010 Tiger River Bengal, Caspian, Sumatran & Siberian spa models This is where the filter standpipe screws into -
The gray-colored jet selector lever is found on all 2014 and newer Hot Spring spa models Always use parts finder to be sure this part is for your spa -
Sku: 75115Jet Selector Bezel, Warm Gray
The warm gray colored jet selector bezel (round trim piece) is found on the 2009-2013 forward Hot Spring spas -
Sku: 71981Check Valve, with Spring, 1-1/2in
1-1/2" spring style check valve is commonly found between the jet pump and filter housing on Tiger River spas This check valve automatically closes when the Tiger River spas jet pump is turned off so the circulation pump (Silentflo 5000) can then draw water ...read more -
Sku: 38429Water Manifold,1in X 1/2in 4-Port
Water Manifold, 1" x 1/2" 4-port -
Sku: 31309Valve Body, Air Control
Air control valve body used on all Hot Spring spas from 1989-mid 1993 This part is found under the bar top on the backside of the spa shell It is sealed to the bottom of the bar top using an o-ring so that water splashed on it does not leak into the ...read more -
Suction cover in charcoal gray for Hot Spot models Stride, Pace, SX, and TX beginning in 2020 -
Suction cover in charcoal gray for Hot Spot models Relay and Rhythm beginning in 2020 -
Sku: 78153Suction Cover, Gray Limelight
Suction cover in Harbor Gray for Limelight spas beginning in 2018 -
This gray-colored jet selector bezel (round trim piece) is found on all Hot Spring spa models beginning in 2014 Always use parts finder to be sure this part is for your spa -
Gray colored top-side air control for the 2003-2005 Solana RX & SX and the 2005 TX spa models Also used on all 1997-2005 Hot Spot spas This allows the air mixture through the jets to be controlled -
Sku: 34338Manifold, Flow Cone
Manifold, flow cone -
Sku: 30502Diverter Valve Body, 1-1/2in
Replacement valve body for Hot Spring spa models manufactured prior to 1994 This gray valve body has 1-1/2" diameter ports This valve body typically sits above the jet pump for diverting water from one area of the spa to the other Use with Valve Insert ...read more -
Waterfall lever for Hot Spot tubs beginning in 2020 Reference no: 1774601-1; WK801-4160 -
Sku: 77231Waterfall Lever, Hot Spring
Waterfall lever for Hot Spring tubs beginning 2014 This lever is also used to replace the now obsolete 75125 cool gray lever -
Sku: 30548Starite Compression Fitting, 1-1/2″
1-1/2" compression coupling assembly (pump union) for all Starite pumps used on Hot Spring spas -
Sku: 71128Wallfitting, Drain Drilled
Wall fitting, rear drain, 1/2" drilled, Hot Spring Rear wall fitting located in the footwell of the spa Front wall fitting part 30488 -
Sku: 35105Jet Selector Bezel, Tiger River
This gray bezel is located under the Jet Selector Knob on the 1994-1997 Tiger River spas If your spa is a 1994 then you'll also need to replace this bezel when you replace the Jet Selector Knob (35104) -
Sku: 36220Bezel, Diverter Valve, Gray, Hot Spring
This gray Smart Jet selector bezel fits below the jet selector diverter valve lever on all gray, blue or jade-colored 1996-1997 Hot Spring spa models -
Sku: 34392Lever and Bezel Cap, Blue
This cap is used on various Air Control levers and Smart Valve Jet selectors from 1992 to 2003 to indicate the different zones that the valve can be used to adjust It also serves to cover the screws that hold the levers or bezels in place -
Sku: 33838Valve Body, Air Control
This is part of the air control valves used on Hotspring and Tiger River spas from 1999 to 2003 It is where the moving portion of the valve resides and where the plumbing connects to the valve, as well as provides a way to mount the valve to the shell of ...read more -
Sku: 76000Bezel, On/Off Valve, Warm Gray
This bezel, warm grey colored, is used for the on/off valve for the fountain on Hot Springs spas The bezel covers up the actual valve, and the stem for the valve sticks up through this bezel so the handle can be attached -
This bezel is used on Limelight spas as part of the diverter assembly and is Harbor Gray in color -
This handle is used on Hot Spot Pace (PAC) spas beginning in 2020 as part of the diverter assembly and is Charcoal Gray in color -
This large handle is used on Limelight spas as part of the diverter assembly and is Harbor Gray in color -
Sku: 73456Check Valve, Flow Control
This check valve is plumbed in line with the Bella Fontana and Amur water features in Hotsprings and Tiger River spas to keep the water flow through the fountain the same when the jet pumps are changed from low speed to high speed and vice versa -
Sku: 397046-3/4 Port Water Manifold, 2in Slip PVC
PVC water manifold, 2" Slip x 6 Port 3/4"
Showing 61–90 of 203 results