Plumbing Fittings

Plumbing: Elbow, Plug, Tubing

Showing 1–30 of 63 results

  • Precision Jet Elbow
    Sku: 36159

    Precision Jet Elbow

    This elbow is used to glue onto the rear of the Precision Jet Body This elbow is an odd size and is not available at the local hardware store
    $3.24
    Add to cart
  • Drain Plug, Wavemaster
    Sku: 32267-1

    Drain Plug, Wavemaster

    This drain plug is screwed into the female port on the front of Wavemaster 3000, Wavemaster 4000 and 6000 jet pumps when there is an absence of a bleedline   For spas with a bleedline, the 32267 is used in place of this fitting This drain plug can be ...read more
    $2.93
    Add to cart
  • Manifold Plug, 3/4in Slip X 1/4in closed nipple
    Sku: 38398

    Manifold Plug, 3/4in Slip X 1/4in closed nipple

    This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
    $10.96
    Add to cart
  • Flexible PVC, 3/4in Inside Dimension X 3ft
    Sku: 70312

    Flexible PVC, 3/4in Inside Dimension X 3ft

    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measured from the inside (I D ) of the piping Note: This is ...read more
    $13.18
    Add to cart
  • 449-020 2in Plug
    Sku: 11080

    449-020 2in Plug

    This is a 2" PVC plug   It can be used to plug any 2" female PVC fitting and should be installed using PVC primer and cement   You can get PVC cement at your local hardware store
    $4.69
    Add to cart
  • Flexible PVC, 2in inside Diamter X 3ft
    Sku: 70308

    Flexible PVC, 2in inside Diamter X 3ft

    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $32.85
    Add to cart
  • Flexible PVC, 1/2" inside Diameter X 3ft
    Sku: 70313

    Flexible PVC, 1/2″ inside Diameter X 3ft

    Flexible pvc is a ribbed looking white or beige type of pvc It comes in three foot sections and is glued using pvc primer and pvc cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping Note: This is ...read more
    $11.66
    Add to cart
  • Flexible PVC,1-1/2in Inside Diameter X 3ft
    Sku: 70309

    Flexible PVC,1-1/2in Inside Diameter X 3ft

    Flexible PVC is a ribbed looking white or beige type of PVC This size is usually found coming off of the jet pump or water diverter valves (Smart Jet) It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware ...read more
    $28.35
    Add to cart
  • Street Elbow, 2in, 45 Degree, Spigot X Slip
    Sku: 35514

    Street Elbow, 2in, 45 Degree, Spigot X Slip

    45 degree PVC elbow, 2", Spg X Slip
    $7.00
    Add to cart
  • Elbow 1/2in Polybarb
    Sku: 34838

    Elbow 1/2in Polybarb

    This is a 1/2" 90-degree barbed elbow for use with clear 1/2" PVC tubing
    $8.25
    Add to cart
  • Diverter Valve Wallfitting Nut
    Sku: 34391

    Elbow, Street 90 2in Spig X Slip

    This is a 2" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $10.88
    Add to cart
  • Elbow, 90 Degree 1/2in Slip X Slip
    Sku: 30642

    Elbow, 90 Degree 1/2in Slip X Slip

    This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $4.79
    Add to cart
  • Diverter Valve Wallfitting Nut
    Sku: 300843

    406-101 Red Elbow 3/4inX1/2in

    Reducing 90-degree ell, 3/4" x 1/2", plumbing fitting
    $6.60
    Add to cart
  • Elbow, 90 Degree 2in Slip X Slip
    Sku: 31932

    Elbow, 90 Degree 2in Slip X Slip

    This elbow is used to join two 2" male PVC slip fittings or 2" rigid or flexible PVC pipes together at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $8.14
    Add to cart
  • Elbow, 90 Degree 3/4in Slip X Slip
    Sku: 30643

    Elbow, 90 Degree 3/4in Slip X Slip

    This is a 3/4" 90-degree elbow made out of PVC which will accept two male 3/4" PVC flex or rigid pipes and join them together at a 90-degree angle using PVC primer and cement
    $2.11
    Add to cart
  • Manifold, Flow Cone
    Sku: 33021

    Elbow, 90 Degree 1-1/4in X 1in

    This elbow is used to join a 1 1/4" male PVC slip fitting or 1 1/4" rigid or flexible PVC pipe to a 1" male PVC slip fitting or 1" rigid or flexible PVC pipe at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings ...read more
    $6.18
    Add to cart
  • Flexible PVC,1-1/4in Inside Diameter X 3ft
    Sku: 70310

    Flexible PVC,1-1/4in Inside Diameter X 3ft

    Flexible PVC is a ribbed looking white or beige type of PVC It comes in three-foot sections and is glued using PVC primer and PVC cement found at your local hardware store The diameter is measure from the inside (I D ) of the piping
    $12.59
    Add to cart
  • Street Elbow, 90 3/4in Spig X Slip
    Sku: 30650

    Street Elbow, 90 3/4in Spig X Slip

    This is a 3/4" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $6.18
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Sku: 30697

    Plug, 3/4in Spig

    Plug, PVC, 3/4" Spig   This plug is made out of PVC and fits in a female PVC slip fitting   It can be used to plug an extra port on a manifold or tee that is not needed   Or cap off a piece of plumbing that is no longer used
    $5.05
    Add to cart
  • Cap, Air Valve Lever, Taupe
    Sku: 30645

    Elbow, 90 Degree 1-1/2in Slip X Slip

    This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 90-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $5.97
    Add to cart
  • Adapter, Ell 1/2in Hose X 1/4in Mpt
    Sku: 39438

    Adapter, Ell 1/2in Hose X 1/4in Mpt

    Adapter, barbed ell, PVC, 1/2" hose x 1/4", male pipe thread
    $3.78
    Add to cart
  • Elbow, 45 Degree 3/4in Slip X Slip
    Sku: 30656

    Elbow, 45 Degree 3/4in Slip X Slip

    This elbow is used to join two 3/4" male PVC slip fittings or 3/4" rigid or flexible PVC pipes together at a 45-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $2.43
    Add to cart
  • Elbow/Union Assembly, Hot Spot
    Sku: 70906

    Elbow/Union Assembly, Hot Spot

    This assembly is used in two places on the 1993-1994 Hot Spot equipment compartment One of these assemblies connects onto the discharge (top) of the Wavemaster 3000 jet pump and the other end connects onto one side of the heater The second place is on the ...read more
    $45.58
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Sku: 30651

    Street Elbow, 90 Degree 1in Spig X Slip

    This is a 1" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $8.03
    Add to cart
  • Elbow, 3/4in Poly Barbed
    Sku: 32480

    Elbow, 3/4in Poly Barbed

    This is a 3/4" 90-degree barbed elbow for use with clear 3/4" PVC tubing
    $10.26
    Add to cart
  • Elbow, 3/4in Poly Barbed
    Sku: 30649

    Street Elbow, 90 1/2in Spig X Slip

    This is a 1/2" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $5.46
    Add to cart
  • 416-020 ELL, 2-IN .22.5 Degree
    Sku: 300615

    416-020 ELL, 2-IN .22.5 Degree

    416-020 ell, 2-in 22 5 deg
    $7.24
    Add to cart
  • Elbow, 3/4in Poly Barbed
    Sku: 70188

    Elbow, 90Degree 3/4in X 1/2in Slip X (fipt) Female Iron Pipe Threaded

    Ell, 90, PVC, 3/4" Slip X 1/2" Fipt
    $3.38
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Sku: 30659

    Elbow, 45 Degree 1-1/2in Slip X Slip

    This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 45-degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $8.30
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    Sku: 30652

    Elbow, 90 degree, 1-1/2in Spig X Slip

    This is a 1 1/2" 90-degree street elbow made of PVC plastic   It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting   This allows for the elbow to be used in tighter spaces
    $11.95
    Add to cart

Showing 1–30 of 63 results