Welcome to Backyardplus! In this post, we show you how to set the program jumpers in a 2009.5 – 2012.5 Hot Spring, Limelight, and Tiger River spa with the Orca control box. Before we get started, let’s go over the tools and parts you will need.
Tools you will need:
- Needle nose pliers
Parts you will need:
- 78039 IQ 2020 Orca Motherboard
- 36021 Program Jumper
Step 1. Disconnect power from the spa.
Step 2. Locate the P9 port on the motherboard.
Step 3. Place a program jumper on the left two pins of the P9 port to enter service mode.
Step 4. Reconnect power to the spa.
Step 5. Press Next on the LIGHTS soft button until Configuration is highlighted.
Step 6. Press Select on the OPTIONS soft button.
Press Next on the LIGHTS soft button to program the jumpers.
Step 7. Set the program jumpers according to your spa model.
Step 8. Disconnect power from the spa.
Step 9. Remove the program jumper from the left two pins and hang it on the far left pin.
Good job!
Watch the video here! “How to Set the Program Jumpers in a 2009.5 – 2012.5 Hot Spring and Tiger River Spa”
Questions about your spa? Contact us! We are the top Hotspring spa parts retailer on the web.
Call us at (805)541-9000
Text us to receive technical support
In addition to “How to Set the Program Jumpers in a 2009.5 – 2012.5 Hot Spring and Tiger River Spa” we offer:
- Our Parts Finder which allows you to find exact-match replacements for your hot tub
- Free technical support that will allow you to maintain and repair your own spa accordingly
- Information regarding your products and their usage through our blog posts.
- Tutorials and assistance through our videos
- Follow us on our Facebook page
Our goal here at Backyard Plus is to help save you money by avoiding costly service calls for repairs that you can easily do yourself!