Welcome to Backyardplus! In this post, we show you how to assemble the 76525 Jet Body and how to install and remove the 76526, 76528, and 77118 jets from the Jet Body.
Table of Contents
Step 1. Place the gasket on the backside of the jet body. The gasket goes in between the jet body and the inside shell of the spa.
Step 2. Place the trim piece over the jet body.
Step 3. Install the jet body into the jet body opening.
Step 4. Install the nut on the backside of the jet body with the smooth side facing the gasket. Turn the nut clockwise until the jet body is securely fastened against the spa shell. Use channel locking pliers to fully tighten the nut but do not over-tighten.
Step 5. Insert the jet all the way into the jet body. Turn the jet clockwise with your hand about one and a half rotations until you feel it stop. Continue turning another quarter rotation until you feel it stop again. Turn it clockwise again for about a quarter rotation until you hear a series of small clicks. The jet is now properly seated.
Step 6. Remove the jet by turning it counterclockwise with your hand.
Watch the video here!
Thanks for reading “How To Assemble The 76525 Jet Body and How To Install and Remove the 76526, 76528, and 77118 Jets”.
Backyard Plus is Here to Help You Be the Hero.
Questions about your spa? Contact us! We are the top Hotspring spa parts retailer on the web.
Call us at (805)541-9000
Text us to receive technical support
In addition to “How to Replace a Broken Bleedline Fitting on Your Circulation Pump with the 77427 Bleedline Fitting,” we offer:
- Our Parts Finder which allows you to find exact-match replacements for your hot tub
- Free technical support that will allow you to maintain and repair your own spa accordingly
- Information regarding your products and their usage through our blog posts.
- Tutorials and assistance through our videos
- Follow us on our Facebook page
Our goal here at Backyard Plus is to help save you money by avoiding costly service calls for repairs that you can easily do yourself!