It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 96 results
-
What's included: Hot Spring spa Ozonator (Freshwater III Corona Discharge Ozone System) w/ Direct Connect Power Cord, Injector, Ozone Resistant Tubing & Check Valve Specs: 120v, 60Hz This Hot Spring FreshWater® III Corona Discharge Ozonator ...read more
-
What's included: Compact Freshwater 3 High Output Ozone System w/ Direct Connect Power Cord, Injector, Ozone Resistant Tubing & Check Valve made for all 2006-forward Hot Spot & Solana spa models Description: FreshWater® III CD Ozonator ...read more
-
Sku: 74078
Injector, Freshwater Ozone, Black
The injector fits in-line after the Silentflo 5000 (discharge side and after the heater) This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing, item 72602 -
Sku: 74077
Injector, Freshwater Ozone, Red
This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas) It is designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system The injector is matched to the ...read more -
Sku: 1044101-72228-AM-BYP
Tubing Kit, Del-Ozone-1/4in with Check valve
This 1/4" ID (3/8" OD) ozone-resistant tubing works with UO3 ozone generator It includes an attached 1/4" ozone-resistant check valve, clamps, mounting screws, and new flag terminals This assembly is approx five feet in length Note: There is a small ...read more -
Sku: 1044101-72228-BYP
Tubing Kit, Freshwater III Ozonator-1/4in Tygon/Kynar with Check valve
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators It is the replacement for all Freshwater 3 ozonators It includes an attached 1/4" ozone-resistant check valve This assembly is approx six feet ...read more -
The CoverCradle® is our smoothest operator As the spa cover is folded back the “cradle” design is assisted by dual pneumatic gas shocks lowering it to a gentle rest It only needs twenty-four inches (24") of rear clearance
-
Sku: 72573
Side Arm Assembly, Cover Cradle
This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa -
Sku: 1044101
Check Valve (Ozone) Freshwater Ozone, 1/4in O.D.
Over time an Ozonator check valve will breakdown under the harsh conditions of ozone Our OEM check valves have a special diaphragm (Viton) that enables them to last longer than rubber Rubber diaphragms last about a month before the rubber becomes hard -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 72574
Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 71095
Gas Shock, Cover Cradle
Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black -
Sku: 78415
LED Light Bulb Lens Kit
This LED light bulb lens kit replaces the 78051 LED bulb kit This LED light bulb lens kit is designed for accessibility from the front (front access) on Hot Spring models beginning in 2017 For the clear plastic housing on older models, see item 74415 -
Sku: 78052
LED Point of Light Harness
LED point of light harness This is the front serviceable light found behind the pillows and moto-massage area For the light bulb with lens, see item 78415 -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units Note: Tubing only
-
Sku: 36586
Clip, Extruded Air Valve
Used to hold the air intake for the Freshwater II Ozonator in place on the wall in the equipment compartment near the Ozonator Found in Hotspring and Tiger River Spas with Freshwater II Ozonators -
Sku: 72361
Fuse, Freshwater III, 1/2A 250V FAST-BLO
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Small size fuse used in the Freshwater 3 Ozonator unit -
Sku: 71360-BYP
Power Cord, Freshwater II & III Ozone Units
Every once in awhile rodents like to nibble on various power cords in the equipment compartment This 4' long cord set is the replacement for all Freshwater 2 and Freshwater 3 ozone units Note: This cord will need to be spliced onto the power cord of your ...read more -
This ozone receptacle was introduced in 1995 on the Hot Spring and Tiger River control boxes They were eliminated in the beginning of 1997, only to be added back in the early second quarter of 1997 This receptacle is no longer needed with the new style of ...read more
-
Sku: 72572
Crosslink Assembly, Cover Cradle
The Crosslink Assembly is the large "U" shaped bar that spans from the right side pivot assembly to the left side on the Cover Cradle and the Cover Cradle II cover lifter -
Sku: 35196
Fuse, Freshwater II Ozonator
This is the fuse used to protect the Freshwater II Ozonator -
Sku: 74350
Red Ozone Injector FreshWater III
Ozone Injector assembly including tubing and check valve for Hot Spot and Solana model spas without dedicated circulation pumps This injector is designed for when a 2-speed jet pump is used to circulate the water through the heater -
Sku: 72571
Cover Cradle Left Side Pivot Assembly
The left side pivot assembly viewed standing behind the Cover Cradle -
Sku: 72570
Cover Cradle Right Side Pivot Assembly
The right side pivot assembly viewed standing behind the Cover Cradle -
Sku: 39314
Ozone Injector, Freshwater 1
This red ozone injector is used in conjunction with the Freshwater I Ozonator It designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system -
Sku: 73808
Ozone Restrictor, Freshwater 3
Flow restrictor for the Freshwater III ozone unit used to reduce the ozone order and/or to eliminate any "burping" noise emanating from the spa Simply remove the air filter from your Freshwater unit and attach to this flow restrictor as shown in the picture ...read more -
Sku: 35112
Freshwater Ozone Receptacle, Tiger River
The female plug is installed in the control box and is used to plug in the Freshwater Ozonator on the Pre-1997 Tiger River Manora, Tondi & Khyber spa models -
Sku: 33366
Screw, #8-32 X 3/8in Hex Washer-Hd
The screw used on the Freshwater II Ozonator
Showing 1–30 of 96 results