It was very easy to select the corret parts for my "serial Number". All parts were correct and operated as required.On 06/20/2024 by M. R. (verified customer)
All of our accessories are easy to install and make owning a great brand of hot tub even sweeter. Just when we think our Hot Spring spa can’t get any better, the engineers at Watkins dream up another cool idea and bring it to fruition. Explore some of the add-ons we enjoy in our spas.
Showing 1–30 of 51 results
-
The CoverCradle® is our smoothest operator As the spa cover is folded back the “cradle” design is assisted by dual pneumatic gas shocks lowering it to a gentle rest It only needs twenty-four inches (24") of rear clearance
-
Sku: 72573
Side Arm Assembly, Cover Cradle
This black side arm is used on the CoverCradle and the CoverCradle II It attaches to the side of the spa cover and then to the side of the spa -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 72574
Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 71095
Gas Shock, Cover Cradle
Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Spa Frog® @Ease® SmartChlor® replacement Cartridge for the FROG® @Ease In-Line System How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® ...read more
-
@Ease® mineral cartridge for Spa Frog® for Hot Spot models beginning in 2019 How long do the Mineral and SmartChlor® cartridges last The mineral cartridge lasts four months or whenever the hot tub is drained and refilled The SmartChlor® Cartridge ...read more
-
Spa FROG® @Ease® Smart Chlorine Test Strips Replaces item 77908 In 2 seconds, you can know precisely whether your pH, Total Alkalinity and Hardness are balanced, plus whether or not SmartChlor® needs replacing Simply dip the FROG® @ease® Test Strip ...read more
-
What's Included: (1) Spa Frog @ease Mineral Cartridge, (1) Spa Frog @ease SmartChlor Cartridge, (30) Spa Frog @ease Test Strips & (1) Frog Jump Start The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® ...read more
-
Spa Frog Cartridge Holder (Spa Frog Assembly), used on select Hot Spot Spas The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® Technology that maintains a consistently low chlorine level for weeks Unlike ...read more
-
This restrictor is used in Utopia and Paradise spas only with the Spa FROG® @ease® In-line system
-
Sku: 72572
Crosslink Assembly, Cover Cradle
The Crosslink Assembly is the large "U" shaped bar that spans from the right side pivot assembly to the left side on the Cover Cradle and the Cover Cradle II cover lifter -
Sku: 72571
Cover Cradle Left Side Pivot Assembly
The left side pivot assembly viewed standing behind the Cover Cradle -
Sku: 72570
Cover Cradle Right Side Pivot Assembly
The right side pivot assembly viewed standing behind the Cover Cradle -
Sku: 50049
Square Cover Lifter Bit
Square cover lifter bit -
Spa Frog® @ease® In-line system assembly collar for Hot Spot models
-
Sku: 74502
Spa Frog® @ease® In-Line System Housing
Spa Frog® @ease® In-line system housing used on Hot Spot models How does FROG® @ease® In-line System work The @ease® System combines the proven FROG® mineral formula for killing bacteria with SmartChlor® Technology that maintains a consistently ...read more -
Spa Frog cap for the FROG @ease In-line System in charcoal gray found on Hot Spot models beginning in 2020
-
This version of the Cover Cradle I cover lifter is specifically designed for the 1998-2000 Hot Spring Classic only
-
Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice This version of the Cover Cradle I cover lifter is specifically designed for the 1997-1999 Hot Spring ...read more
-
Obsolete: Factory replacement suggestion item #72714 Hardware Bag #2 used on the Cover Cradle and Cover Cradle II It contains screws for mounting the cover lifter to the spa and cover All screws use Robertson (square drive) head bits
-
Sku: 71096
Sidearm for CoverCradle
OBSOLETE-Use the 72573 This black square tubular sidearm is used on all sides of all versions of the CoverCradle It spans from the spa cover down to the side of the spa -
Sku: 71083
Backarm, Curved Left
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Left Side (as you are folding the cover back away from you) back arm of the Cover Cradle -
Sku: 71086
Bracket, Base, 90 Degree, Left
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Sku: 71105
Bracket, Corner (G/K)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Bracket, Corner (G/K) -
OBSOLETE-Use the 71107-BYP
-
Sku: 71220
Nut, Slot 1/4in
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com -
Obsolete: Factory replacement suggestion item 75149 This kit (item#7 in the diagram) includes the following parts for the Cover Cradle: 1/4" Ball Stud X 4 1/4" Split Lock Washer X 2 1/4" Slot Nuts X 2 1/4" Nut
-
Sku: 71215
Screw, 1/4-20 x 3/4in for Side Hinge
Obsolete from the factory -Available at most hardware stores This #20 1/4in x 3/4" standard screw (stainless steel) that secures the sidearm to the base hinge
Showing 1–30 of 51 results