Best place ever, always goodOn 05/31/2024 by M. D. (verified customer)
Showing 31–60 of 234 results
-
Sku: 71515
Cover Lock Kit, 4 Sets, Black
Four sets of black cover locks This kit has both the female end (mounts onto the spa) and the male end (attaches to the cover strap) and the mounting screws All four of these sets come standard in this kit This coverlock kit replaces all other colors and ...read more -
Sku: 71794
Gas Spring-Uprite
The Uprite® Cover Lifter employs two gas shocks that assist in opening the spa cover Sometimes these gas shocks can fall victim to the elements (storms, crazy uncles, frat parties etc ) and need replacing Replacement time is approximately thirty seconds ...read more -
There were two different sized ball studs used on Hot Spring cover lifters One is this 1/4" threaded shaft and the other (3rd qtr 2009) is 5/16" threaded shaft (part 75149) Either one size or the other will be on your cover lifter but not both sizes Ball ...read more
-
Sku: 72574
Hardware Bag #1, Cover Cradle
This Cover Cradle & Cover Cradle II hardware bag #1 includes the following: Four Hole Side Hinge (Qty 2) Four Hole Rear Hinge (Qty 2) #10 x 1" Flat Head Screws (Qty 8) #10 x 1-1/2" Flat Head Screws (Qty 8) Note: The items in this hardware bag are ...read more -
Sku: 70322
Key, Cover Lock (Set of 2)
These keys (set of two) lock & unlock the spa covers (latches) cover locks that are located on the end of the four straps The cover locks are lockable to help prevent or discourage unauthorized entry into the spa -
Sku: 76029-1
FreshWater Vanishing Act Calcium Remover Pillow
Reduce water hardness in an entirely new way with the Vanishing Act calcium remover Instead of adding chemicals to the water, this product removes calcium particles, leaving the water softer and silky on your skin Softer water reduces the need for ...read more -
Sku: 71095
Gas Shock, Cover Cradle
Replacement 40lb gas spring shock for all models of the Cover Cradle cover lifter Gas shock color is black -
Sku: 80000-1
FreshWater Spa Salt, 10lbs, 1 Bag, (1707801-1)
Freshwater Spa Salt in one 10 lbs bag -
Sku: 74034
Gas Shock, Cover Cradle II
Replacement 60lb gas spring shock for all Cover Cradle II cover lifters from the makers of Hot Springs spas The gas shock color is black One of these shocks is used on the Cover Cradle II -
Stainless steel screw used to secure the heater to the equipment compartment floor on Hot Spring & Tiger River spa models Also used on the SilentFlo 5000 Circulation pump and to hold the Ozonator to the wall of the equipment compartment
-
The best way to deliver easy-to-manage, longer-lasting hot tub water is to start with the cleanest water possible This can be achieved with the new FreshWater Clean Screen pre filter This one-of-a-kind pre-filter traps organic contaminants, metals (such as ...read more
-
Sku: 78415
LED Light Bulb Lens Kit
This LED light bulb lens kit replaces the 78051 LED bulb kit This LED light bulb lens kit is designed for accessibility from the front (front access) on Hot Spring models beginning in 2017 For the clear plastic housing on older models, see item 74415 -
Sku: 78052
LED Point of Light Harness
LED point of light harness This is the front serviceable light found behind the pillows and moto-massage area For the light bulb with lens, see item 78415 -
Sku: 74415
Pillow Light, Clear Housing
This is a set of two clear lenses for the LED lights used for the underpillow lighting on 2007 to the end of 2016 Hotsprings brand spas Each of these lenses will hold one multicolor LED light for accent lighting behind the spa pillows See also ...read more -
Sku: 75103
Gas Spring Lock-Uprite
The Gas Spring lock is used to secure the Uprite Lifter in the open position attaching to only one gas shock This part is typically left off when installing the Uprite Cover Lifter unless the spa is located in a windy area -
This ball stud is found on 3rd quarter 2009 and newer UpRite, Cover Cradle and Cover Cradle II lifters The older cover lifters used a 1/4" threaded shaft ball stud which is part# 71107-BYP
-
Sku: 30334
Screw, #4 X 1/2in Stainless Steel
Stainless steel screw used in various locations on Hot Spring, Tiger River, Solana, Hot Spot and Limelight spas -
Sku: 76035
Cup Holder, Hot Spring, Warm Gray
This warm gray colored cup holder is used in place of the pop-up speakers on 2009-2013 Hot Spring spas For cool gray, see item 76036 -
This 1/4" ID (3/8" OD) Kynar/Tygon ozone-resistant tubing kit comes standard with the Freshwater III Ozonators and is also the current replacement tubing for all Freshwater III units Note: Tubing only
-
Sku: 34449
Screw Cover, Teal, Dream Pillow
These are the screw covers hide the five stainless steel screws that hold the Dream Jet Pillow in place This item is for a quantity of one Five of these are used on each pillow -
Sku: 34368
Cap Retainer, Dream Pillow
Nylon retainer (washer) used between the stainless steel screw that secures the Dream Pillow Bladder in place on the 1995-1999 Hot Spring Landmark and the 1995-1996 Hot Spring Summit -
Sku: 36586
Clip, Extruded Air Valve
Used to hold the air intake for the Freshwater II Ozonator in place on the wall in the equipment compartment near the Ozonator Found in Hotspring and Tiger River Spas with Freshwater II Ozonators -
Sku: 76078
ACE Chlorine Generator Cell
This is the replacement cell for the ACE Chlorine Generator cell This cell uses electrolysis to convert salt that is dissolved in the hot tub water into usable chlorine to sanitize the spa water Once the chlorine is used up, it basically recombines into ...read more -
Sku: 77044
Ace Cleaning Bottle
The cleaning bottle used to clean the Ace cartridge This bottle is the proper size to fit the Ace Chlorine Generation Cell for cleaning with vinegar or water with pH decreaser added, ie, acid The bottle is large enough for the entire cell to be submerged ...read more -
Sku: 76036
Cup Holder, Hot Spring, Cool Gray
This cool gray colored cup holder is used in place of the pop-up speakers on 2009-2013 Hot Spring spas For warm gray, see item 76035 -
Sku: 74893
Speakers, Oval Pop-Up (Set of 2)
These speakers are used on Hotsprings spas made from 2009 5 for use with any available sound system compatible with the 2009 5 Hotsprings spas Please use the Parts Finder to confirm this part is for your spa There are two oval-shaped cup holders ...read more -
Sku: 31399
Winterizing Insulation Blanket
This radiant barrier cotton insulation blanket is designed to help keep the equipment compartment warm 24" H X 20" W X 1" Note: The old style vinyl backed fiberglass blanket is temporarily unavailable -
Sku: 76549
Fibercore Replacement Kit
This Fibercor Replacement Kit can be used on all Hot Spring Spa models from 2007 to 2018 and all 2019 Limelight and Hot Spot Spa models This Kit contains approximately 8 pounds of material, which is about 4 cubic feet -
Sku: 72714
Hardware Bag #2, Cover Cradle II
This Cover Cradle II hardware bag #2 includes the following: 1/4"-20 x 3/4" Stainless Steel Hex Bolts (Qty 4) #10 x 1-1/2" Stainless Steel Flat Head Screws (Qty 8) #10 x 1-1/2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware ...read more
Showing 31–60 of 234 results