On 04/15/2024 by R. D. (verified customer)
Showing 61–90 of 159 results
-
Sku: 75152
Upright Extension Tube
One pair (quantity of two) of extensions for the Uprite cover lifter -
Sku: 71775
Gliderite Base Tube Assembly, Rightside
The Gliderite has three black tubular bars (left, center and right) that fit together and form one long bar that mounts near the bottom base of the spa This tube is for the right-hand side only -
This right-side Corner Tube Assembly comes with the pivot collar and screw
-
Sku: 71751
Gliderite Bearing
This bearing is placed over the ¼” – 20 x 1” Hex Head Bolt -
This slot tube is found on both sides of the Gliderite and connects to the opposite end of the sidearm that is attached to the spa cover Illustration (# 11) on the Gliderite parts diagram
-
Sku: 71742
Bolt, #10 X 2-1/2in
OBSOLETE These bolts are used with washers to fasten the left and right Base Tubes on a Gliderite Illustration (# 5) on the Gliderite parts diagram -
Sku: 76184
iCast Transmitter Only (60hz)
This is the iCast transmitter only It is part of the iCast wireless music option that is either required, or can be added to most sound systems used on Hotsprings, Tiger River, Limelight, Solana, and Hot Spot spas It interfaces with the spa's control ...read more -
Sku: 74287
Amplifier, Moonlight Music
This is the new retrofit amp which is not Bluetooth compatible and replaces the old JBL Flatpack APM This is the amplifier used in the Moon Light sound system, manufactured by JBL This amplifier interfaces with the IQ2020 control box and is controlled ...read more -
Sku: 75150
Uprite Channel Pivot Assembly, Left Side
This part attaches onto the left side of the spa cover -
Sku: 74290
Moonlight Music Power Supply Adapter
This adapter is used to connect the 12-volt power supply included in the Moonlight sound system to the Moonlight power amplifier The Moonlight sound system is an optional accessory compatible with Hot Spring spas made from 2009 to current -
Sku: 74099
Moonlight Music Power Supply
This is the power supply unit used to power the amplifier for the Moon Light sound system used on Hotsprings, Tiger River, and Limelight Spas It provides 12 volts DC -
This is the wiring harness used on the sound system used in Limelight spa It interfaces between the amplifier and the speakers placed throughout the spa
-
Sku: 72855
Female Quick Disconnects (10)
These quick disconnects are used to adapt one male spade connector to be able to accept two female spade connectors Used a lot with the sound system installations It should not be used on higher amperage applications -
Sku: 72571
Cover Cradle Left Side Pivot Assembly
The left side pivot assembly viewed standing behind the Cover Cradle -
Sku: 72570
Cover Cradle Right Side Pivot Assembly
The right side pivot assembly viewed standing behind the Cover Cradle -
Sku: 74776
IPod Dock Harness
iPod dock harness for spas beginning in 2009 -
Sku: 74771
IPod Header with Screw
Replacement iPod adapter for the cabinet mounted iPod dock used with some sound systems -
Sku: 74297
ICast Power cord connector, 60HZ
This is the power cord used to connect the power supply for the iCast receiver to the control box of the spa -
Sku: 74294
ICast Interface, 60HZ
This interface allows the IQ2020 control box to communicate with the iCast receiver located in the spa The iCast receiver can communicate with the iCast dock instructions to change tracks or play and pause the music This is used in conjunction with the ...read more -
Sku: 74289
Wire Harness, Moonlight Sound System
This wiring harness is used to connect the JBL amplifier used in the Moon Light sound system to the power source as well as the speakers used in the sound system -
Sku: 74080
SpAudio II Sony Stereo Interface Cable
This cable allows the IQ2020 control box to communicate with the Sony Marine Stereo used in the Spaudio II Without this cable, the spas remote control or topside control cannot be used to operate the Sony Stereo -
Sku: 73928
SpAudio II Sony System
Sony replacement unit for the SpAudio II sound system -
Sku: 73808
Ozone Restrictor, Freshwater 3
Flow restrictor for the Freshwater III ozone unit used to reduce the ozone order and/or to eliminate any "burping" noise emanating from the spa Simply remove the air filter from your Freshwater unit and attach to this flow restrictor as shown in the picture ...read more -
Sku: 73731
SpAudio II Antena
This is the antenna used on the Spaudio II sound system This antenna allows for the radio to receive FM stations The antenna basically just lays down inside the equipment area but an extension can be added to place the antenna outside of the spa for ...read more -
Sku: 72853
SpAudio Hardware Bag
Hardware for Spaudio -
Sku: 72715
Hardware Bag #3, Cover Cradle II
This Cover Cradle II hardware bag #3 is only for spas with removable exterior panels and includes the following: #10 x 2" Stainless Steel Flat Head Screws (Qty 8) #10 x 2" Stainless Steel Pan Head Screws (Qty 14) Note: The items in this hardware bag are ...read more -
Sku: 71744
Washer, Gliderite
These washers are used with the ¼” – 20 x 5/8” Hex Head Bolts & ¼” – 20 x 1” Hex Head Bolt on the Gliderite and also used on the Uprite cover lifter -
Sku: 71217
Hex Head Bolt, 1/4in-#20 X 1in
This bolt is used to fasten the Slide Lock Bar to the Side Arm -
Sku: 71218
Bolt, #20 X 1/4in. X 2in. Hex Head
Attaches the sidearm to the pivot wheel on all spa models (except the Hot Spring Classic)
Showing 61–90 of 159 results