The team at Backyardplus.com are the best for anything Hot Springs. Super friendly and knowledgeable.On 06/05/2024 by S. O. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Brand: Hot Spring Pre 89, Tiger River
Showing 1–30 of 56 results
-
Sku: 77119IQ 2020 Heater Relay Board
This IQ2020 Heater Relay Circuit Board is the newest revision for the 2001-2009 5 IQ2020 Control Box It's upgraded design provides a more efficient method of connecting the heater's power cord to this board, therefore, reducing fatigue on the two "beefed up" ...read more -
This OEM replacement IQ 2020 control board (motherboard) is for all IQ 2020 Control Boxes (77271) found on all 2001-2009 5 Hot Spring, Tiger River and Limelight spa models It is used on domestic 60hz model spas only -
This jumper is used to bypass the pressure switch on the 2002-forward IQ 2020 spa control system The PDR Titanium Replacement Heater has its own automatic cut-off in the event of a low flow condition thus negating the need for a pressure switch After ...read more -
Replaces the obsolete 39525 and obsolete 39204 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 ...read more -
Sku: 79006Thermistor, Control Thermostat, Watkins No Fault Heater, Hot Spring, Tiger River and Limelight
Replaces the obsolete 39530 and obsolete 39205 Newly designed and includes o-ring This control thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard It simply screws ...read more -
Replaces 38415 Newly designed and includes o-ring This control thermostat thermistor sensor detects the spa waters temperature and relays that information back to the system It simply screws into the No Fault Heater Housing (hand tight only) and plugs ...read more -
Replaces 38416 Newly designed and includes o-ring This high-limit thermistor sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F It simply screws ...read more -
Sku: 34878O-Ring, Control Thermistor
Control Thermostat Thermistor o-ring for the 79006 and 78970 thermistors This o-ring is located on the "inlet" side of the heater and is the larger of the two thermistor o-rings For the outlet side of the heater see the part# 34879 o-ring -
Sku: 34879O-Ring, Hi-Limit Thermistor
High-Limit Thermistor o-ring for the 79005 and 78969 thermistors This o-ring is located on the "outlet" side of the heater and is the smaller of the two thermistor o-rings For the "inlet" side of the heater see part 34878 -
Sku: 74723Relay, IQ 2000 Control Box
This 30amp 18volt DC coil relay is used in the 1997 and 1998-2000 Hot Spring & Tiger River IQ 2000 Control Box There are two of these relays located in the upper left corner of the IQ 2000 control box One is the heater relay and one is the heater ...read more -
Sku: 39192-X2-BYPPower Jumper, Heater Relay Board, 2-pin
2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board -
Sku: 39193-X2-BYPPower Jumpers, Heater Relay Board, 3-Pin (pkg of 2)
Package of two 3-pin metal jumpers is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style Heater Relay Board there are two of these 3 pin jumpers The jumpers are inserted flat on the top edge of the heater ...read more -
Sku: 39193Power Jumper, Heater Relay Board, 3-Pin
The 3-pin metal jumper is one of two different jumpers that are used on the original 73355 Heater Relay Board On the new style heater relay board, there are two of these 3 pin jumpers The jumpers are inserted flat just above the gray terminal block numbered ...read more -
This control thermostat was mounted in the control box directly behind the temperature dial on all Hot Spring models from 1989-1993 It was mounted on the under the top-side control panel on all Tiger River models from 1992-1994 -
Sku: 30099Bushing, Strain Relief
This 3/8" strain relief is used to secure the jet pump(s), circulation pump, light and Ozonator power cords to the bottom of the IQ 2020 Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should ...read more -
This screw is used to hold the front cover of the IQ 2000 and IQ 2020 box in place This screw is not compatible on models made between 2007 and 2009 5 or older models with the upgraded heater relay board (Item #77119) The screw is too long and will hit ...read more -
Sku: 39192Power Jumper, Heater Relay Board, 2-Pin
This 2-pin metal jumper is one of two different jumpers that are used on all years of the IQ 2020 Heater Relay Board The 3-pin jumper is also used depending on the spa model and whether it's wired 120v or 240v -
Sku: 30098Strain Relief, Control Box, 3/8in
This strain relief is used to secure the circ pump and Ozonator's power cord to the bottom of the IQ Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
Sku: 36044Plug, Hole, 0.50
This plug is used to fill openings found on the back of the IQ2000 and IQ2020 Control box that can be used to allow wiring to enter the control box These plugs cover the openings that are not in use to help prevent dust, dirt, and insects from entering the ...read more -
Sku: 36021Program Jumper
This program jumpers can be found on the motherboard of all IQ 2000 and IQ 2020 Control Boxes Also used on the Interlock Timer Board (70821) -
Sku: 36022Strain Relief 10/3
Heater strain relief used to secure the heaters power cord to the bottom of the IQ Control boxes The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
This is the replacement flow switch for the 1995-1996 Hot Spring Classic, Sovereign, Prodigy and Jetsetter spa models It is also the replacement for the 1995-1996 Tiger River Manora and Tondi spa models This low voltage flow switch monitors the flow of ...read more -
Sku: 10489Bridge Wave Rectifier
This rectifier was used on the 1990-1993 Hot Spring Classic, Sovereign, Prodigy, Jetsetter, Highlife and Grandee, 1994 Tiger River Khyber and the 1993-1994 Hot Spot Z model -
Sku: 70297Relay, DPST 110VDC Coil
This relay (or contactor) is also known as the Interlock Relay & Heater Relay is a 110VDC coil 30amp and was used on the 1990-1993 Hot Spring Classic, Grandee, Highlife, Jetsetter, Prodigy & Sovereign spa models Also used on the 1992-1994 Tiger River ...read more -
Sku: 36021-x4-BYPProgram Jumpers (Qty of 4)
(Quantity of 4) Pack of program jumpers used on the motherboards of all IQ 2000 and 2001-2009 5 IQ 2020 Control Boxes Also used on the Interlock Timer Board ( 70821 ) -
Sku: 36043Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box -
This is the replacement flow switch for the 1995-1996 Hot Spring 220 only Classic, Sovereign, Grandee, Highlife, Landmark and Summit spa models It is also the replacement for the 1995-1995 Tiger River Khyber spa model This low voltage switch is located in ...read more -
Sku: 34934Fuse 2 Amp 250V
2 amp 250v fuse for the 1995-1998 Hot Spot RE, RLX, SE, and SLX spa models as well as the 2009 forward IQ 2020 control boxes -
Sku: 71377Power Jumper, Terminal Block, IQ 2000
Jumpers used on the IQ 2000 control box terminal block for 120-volt operation or converting from 120 volt to 230 volt -
Sku: 71377-x3-BYPPower Jumper, Terminal Block, IQ 2000
Kit of three jumpers used for configuring the voltage on the IQ2000 control system used from 1997 to 2000 on Hot Springs and Tiger River spa The configuration of the jumpers allows for conversion between 120 volt and 230 volt operation
Showing 1–30 of 56 results