I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
These control boxes and their circuit boards do on occasion just grow tired as any outdoor computer could. No worries, we have just the right complete factory replacements as well as the internal parts all from the makers of Hot Spring, Tiger River, Solana, Limelight, and Hot Spot Spas.
Showing 1–30 of 35 results
-
Sku: 30208
Hi-Limit, Spa, 120 Degree, Hot Spring
This Spa Hi-Limit thermostat (aka spa reset or tub reset) is a safety device designed to prevent damage to the spa that would occur if the spa overheated The probe of this high-limit resides in a "drywell" along with the thermostat probe The spa high-limit ...read more -
This sensor fitting is installed through the side spa shell at the base of the hot tub near the suction and drain fittings on Hot Spot models beginning in 2020 Its purpose is to provide a watertight seal around the 72493 temperature control thermistor bulb
-
Sku: 76112
Thermistor Sensor Fitting, Hot Spot
This sensor fitting is installed through the side of the filter housing in all 1998-2005 Hot Spot brand spas Its purpose is to provide a watertight seal around the 71578 thermistor bulb -
Sku: 37727
Thermosensor Fitting, Solana
This thermo-sensor fitting is used to waterproof the temperature sensor (thermistor) that is located in the filter compartment of all Solana TX, RX and SX models -
Sku: 34806
Hi-Limit, Spa, Hot Spot
This Spa High-Limit ( red spa reset or tub reset button) is a safety device designed to shut off all power to the spa should the water temperature reach 120 degrees (plus or minus 4 degrees F) This will prevent damage to the spa or injury to bathers from ...read more -
Sku: 34934
Fuse 2 Amp 250V
2 amp 250v fuse for the 1995-1998 Hot Spot RE, RLX, SE, and SLX spa models as well as the 2009 forward IQ 2020 control boxes -
Sku: 33248
Hi-Limit, Spa, Tiger River and Hot Spot
This Spa Hi-Limit thermostat (red spa reset or tub reset button) is the factory replacement for the 1992-1994 Tiger River Khyber, Manora, and Tondi Also for the 1993-1994 Hot Spot Z model Notes: The Spa Hi-Limit is a safety device designed to shut off ...read more -
Sku: 72361
Fuse, Freshwater III, 1/2A 250V FAST-BLO
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Small size fuse used in the Freshwater 3 Ozonator unit -
Used on the 1995-1997 Hot Spot spas this fitting provided a flange for the cartridge-style heater element to seal against and a "dry-well" for the thermistor probe to slide into
-
This Heater High-Limit (red heater reset button) is the replacement for the Hot Spring Classic (Model D)
-
Sku: 37089
Fuse SLOBLO 1/2A 250V 5x20in
This is a replacement fuse for the circulation pump line on IQ 2020 control boxes on all Hotsprings, Tiger River, and Limelight spas The fuse holder is mounted in the back of the control box near the circulation pump terminals on the circuit board A ...read more -
Kit includes both 6 3A and 8A fuse, 3pk each for Cool Zone
-
Sku: 34506
Fuseholder
Fuse holder houses the fuse for the older Freshwater II Ozonators and is also used to house the fuse for the circ pump circuit on IQ 2000 and IQ2020 control boxes -
Sku: 35196
Fuse, Freshwater II Ozonator
This is the fuse used to protect the Freshwater II Ozonator -
Sku: 71618
Fuse, 25Amp 300V Type SC-25
Slo-blo fuse used on the 71584, 73859, 72469, and 76840 control boxes for the pump and heater circuits -
Sku: 34500
Fuse 1.5A 230V Slo-Blo
One of two fuses used on the 70821 circuit board To test this fuse, remove it from the board and check the resistance from end to end If the fuse is good, the fuse should test closed with no resistance If it is bad, it should show an open circuit -
Sku: 302556
Fuse 2A 250V Slo-Blo
Replacement fuse found in the newest IQ 2020 control box on all 2012 5 Hot Spring and Limelight spas -
Sku: 32452
Harness, Pcb 4T 115V 5Kw
Wiring harness for a 10-minute timer circuit board used on all models 1991 to 1993 Hot Springs spas The timer board is part number 71346 and is currently unavailable -
Sku: 0965201
FUSE, 750MA 250V
This is the small fuse used in control boxes found in most Hot Spot brand spas with Gecko control systems in them The fuse is located usually in the top right corner of the circuit board near where the spa light connects to the circuit board -
Sku: 74140
15A-ATC/ATO Blade Fuse
15A-ATC/ATO blase fuse -
Sku: 74139
IA-3AG Fast Acting Fuse
IA-3AG fast-acting fuse -
Sku: 71280
Thermowell, Hot Spot Square
Thermowell houses the temperature sensor for Hot Spot Square -
Sku: 70899
Thermowell Assembly
Thermowell houses the thermistor probe on a 1995-1997 Hot Spot spa models -
Sku: 30201
Contactor 2PL208-240V A7730666
Contactor -
Sku: 30200
Contactor, 3 Pole 115Volt AC
This 3 Pole 115Volt AC Coil was used on the older Hot Spring Classic and Indoor/Outdoor spa models -
Sku: 34585
Slo-Blo Fuse, 1A 250V
Slo-Blo fuse, 1A 250V -
Thermowell housing for the t-stat temperature probe to insert into This thermowell aka "drywell" keeps the copper t-stat probe away from the chlorinated water so it doesn't dissolve
-
Cool gray temperature sensor fitting
-
Sku: 30209
Hi-Limit, Heater, 150 degree, Hot Spring
OBSOLETE: This Heater Hi-Limit (red "heater reset" button) is designed to kill power to the heater if the core temperature exceeds 150 deg The probe of this high-limit is inserted into the end of the heater element and surrounded with plumbers putty to ...read more -
Sku: 10490
Dimmer Switch, Hot Spring
This 115volt dimmer switch is used in all 1990-1996 Hot Spring spas This is one of two types of dimmers used in Hot Spring spa models The second choice is the 30189 used in all pre-1990 Hot Springs Note: Do not use a floodlight larger than 100 watts ...read more
Showing 1–30 of 35 results