Super service. Thank you.On 05/21/2024 by N. M. (verified customer)
Showing 31–60 of 108 results
-
Sku: 35628
Surge Protector, Relay Connection
Relay surge protector (aka transient suppressor) used on all 1990-1993 Hot Spring spa models and on the third quarter 1995 220volt Hot Spring models This is one of two types of surge protectors used in the Hot Spring brand The second style is 31458 -
Sku: 10489
Bridge Wave Rectifier
This rectifier was used on the 1990-1993 Hot Spring Classic, Sovereign, Prodigy, Jetsetter, Highlife and Grandee, 1994 Tiger River Khyber and the 1993-1994 Hot Spot Z model -
Sku: 70297
Relay, DPST 110VDC Coil
This relay (or contactor) is also known as the Interlock Relay & Heater Relay is a 110VDC coil 30amp and was used on the 1990-1993 Hot Spring Classic, Grandee, Highlife, Jetsetter, Prodigy & Sovereign spa models Also used on the 1992-1994 Tiger River ...read more -
Sku: 36021-x4-BYP
Program Jumpers (Qty of 4)
(Quantity of 4) Pack of program jumpers used on the motherboards of all IQ 2000 and 2001-2009 5 IQ 2020 Control Boxes Also used on the Interlock Timer Board ( 70821 ) -
Sku: 36043
Control Box Plug, for 0.875 Hole
Black plastic plug used on the IQ 2000 and IQ 2020 Control Boxes to seal off an unused port helping to prevent bugs, dirt and debris from making a home inside the control box -
This is the replacement flow switch for the 1995-1996 Hot Spring 220 only Classic, Sovereign, Grandee, Highlife, Landmark and Summit spa models It is also the replacement for the 1995-1995 Tiger River Khyber spa model This low voltage switch is located in ...read more
-
Sku: 30100
Strain Relief Bushing, 1/2in
This bushing is used for strain relief of cords that are 1/2" in diameter, such as the cord for the heater in a Hotsprings, Tiger River, or LimeLight spa -
Sku: 30199
Contactor, Double Pole 115V AC
This double pole 115Volt AC contactor (relay) is found in the control box on all Hot Spring models through the end of 1989 It is used as the Interlock Relay only on the 115v Hot Spring models On the 220v Hot Spring models, it is the only relay found in the ...read more -
Sku: 30198
Contactor, Single Pole, 115Volt AC
This single-pole 115Volt AC contactor (relay) is found in the control box on all 115volt Hot Spring models through the end of 1989 It provides power to either the jet pump or the heater -
Sku: 34934
Fuse 2 Amp 250V
2 amp 250v fuse for the 1995-1998 Hot Spot RE, RLX, SE, and SLX spa models as well as the 2009 forward IQ 2020 control boxes -
Sku: 71377
Power Jumper, Terminal Block, IQ 2000
Jumpers used on the IQ 2000 control box terminal block for 120-volt operation or converting from 120 volt to 230 volt -
Sku: 30118
Cordgrip, Thermostat
This cord grip fitting is what seals around the 30203 and the 75077 control thermostats copper wire May require the 30690 adapter (not included) -
Sku: 71377-x3-BYP
Power Jumper, Terminal Block, IQ 2000
Kit of three jumpers used for configuring the voltage on the IQ2000 control system used from 1997 to 2000 on Hot Springs and Tiger River spa The configuration of the jumpers allows for conversion between 120 volt and 230 volt operation -
Mounts in the control box on all Hot Spring models prior to 1997 that used a square receptacle The one-speed circulation pump (Silentflo 5000) plugs into this receptacle regardless of the voltage of your spa model All Hot Spring spa circulating pumps are ...read more
-
Sku: 70298
Relay, DPDT DC Coil
This double-pole/double-throw DC coil relay was used on the 1991-1993 Hot Spring Classic, Sovereign, Prodigy, Jetsetter, Highlife and Grandee spa models Used also on the 1992-1994 Tiger River Khyber spa model -
Sku: 32337
Jet Switch, Hot Spring
Jet switch for the Hot Spring 1991-1996 Classic, Grandee, Highlife, Jetsetter, Prodigy and Sovereign and 1995 through 2nd quarter 1996 Landmark & Summit spa models This switch mounts inside the control box directly behind the front control panel and is ...read more -
Sku: 10408
Receptacle, Jet Pump, Hot Spring
This jet pump receptacle mounts into the control box to provide an outlet to plug in the jet pump's power cord on the 1990-1996 Hot Spring Classic, Grandee, Highlife, Jetsetter, Prodigy & Sovereign spa models -
Sku: 74150
I2 C/RS485, 5-Port Comm Hub, IQ 2020
This 5 port I2C/RS485 adapter is used to "expand" the IQ2020 Controller to allow other accessories to plug into the motherboard If you're adding on an IQ 2020® Navigator RF Remote, Music System, Luminescence Multi-Colored LED Light, etc , you'll need this ...read more -
This ozone receptacle was introduced in 1995 on the Hot Spring and Tiger River control boxes They were eliminated in the beginning of 1997, only to be added back in the early second quarter of 1997 This receptacle is no longer needed with the new style of ...read more
-
Sku: 71274
Jet Switch-2 Position, Hot Spring
This rotating jet switch is located in the control box of some pre-1988 Hot Spring spa models It is activated by rotating the "Jets" dial on or off on the exterior control panel -
Sku: 37089
Fuse SLOBLO 1/2A 250V 5x20in
This is a replacement fuse for the circulation pump line on IQ 2020 control boxes on all Hotsprings, Tiger River, and Limelight spas The fuse holder is mounted in the back of the control box near the circulation pump terminals on the circuit board A ...read more -
Kit includes both 6 3A and 8A fuse, 3pk each for Cool Zone
-
Sku: 34506
Fuseholder
Fuse holder houses the fuse for the older Freshwater II Ozonators and is also used to house the fuse for the circ pump circuit on IQ 2000 and IQ2020 control boxes -
Sku: 30189
Dimmer Switch, Hot Spring
This 115volt dimmer switch is used in pre-1990 Hot Spring spas This is one of two types used in Hot Spring spa models from 1980-1996 The second choice is the 10490 used in the 1990-1996 Hot Springs Note: Do not use a floodlight larger than 100 watts ...read more -
This screw is used for holding the IQ 2000 and IQ 2020 control boxes in place on the mounting bracket in Hotsprings, Tiger River, and Limelight spas
-
Sku: 36018
IQ Control Box Bracket
This aluminum bracket attaches to the spa door frame to enable the IQ Control Box to mount securely to this bracket The bracket does not come with the two 36898 screws that attach it to the control box Simple wood screws are used to attach it to the wood ...read more -
Sku: 30105
Romex Clamp 3/4in
This clamp is used as strain relief is used to secure the heater's power cord to the bottom of the IQ Control box The strain relief prevents the cord from accidentally being disconnected from inside the control box should the cord be pulled down -
This is the power supply for the Eagle control box IQ 2020 spa control system for Rev D or newer
-
Sku: 75046
Quick Connect Terminal Kit
This kit includes 6 flag terminals and 6 screws used on the 70297 and the 70298 replacement relays -
Sku: 34500
Fuse 1.5A 230V Slo-Blo
One of two fuses used on the 70821 circuit board To test this fuse, remove it from the board and check the resistance from end to end If the fuse is good, the fuse should test closed with no resistance If it is bad, it should show an open circuit
Showing 31–60 of 108 results