I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
Our factory original replacement filters are designed specifically for Watkins Manufacturing makers of Hot Spring, Tiger River, Limelight, Hot Spot and Solana spas. The filters play a key part in Hot Springs’ “hydraulically balanced” systems. Hydraulically balanced means there is one square foot of filter fabric per one gallon of water flowing through their systems. This equation is doubled in the new patented Tri-X ceramic filters. Balanced water flow makes efficient filtering, perfect jet pressure and a happy jet pump.
Showing 1–30 of 47 results
-
Floating weir assembly with cover in charcoal gray The weir measures approximately 11 5 inches in diameter and works with filter 71827 and 71948 standpipe
-
Floating weir assembly with cover The weir measures approximately 11 5 inches in diameter and is a Harbor Gray color
-
Floating weir assembly with cover in charcoal gray The weir measures approximately 9 inches in diameter and works with filter 71825 and 71948 standpipe
-
Floating weir assembly with cover The weir measures approximately 9 inches in diameter and is a Harbor Gray color
-
This white filter cap screws onto the top of the filter standpipe to hold the filter in place on Hot Spring spas
-
This charcoal gray standpipe cap which is found on Hot Spot models holds the filter in place on a gray-colored standpipe
-
Sku: 36513
Filter Standpipe Cap, Gray
This FreshWater Ag+ gray standpipe cap holds the filter in place on a gray-colored standpipe This gray standpipe cap identifies the correct standpipe (if your spa model has more than one filter) to insert the Fresh Water Ag+ Silver Ionizer into -
Sku: 30482
O-Ring, Wallfitting Front-Red
Silicone wall fitting o-ring used in various places on Hot Spring, Tiger River, Hot Spot, and Solana spas -
Sku: 73172
Skimmer Weir, Warm Gray, Hot Spring
Used on the champagne opal, pearl white, copper & sand-colored 2004-2013 Hot Spring spas Use this to replace a warped, discolored or broken skimmer -
Sku: 71856
Skimmer Weir Kit, Cool Gray, Hot Spring
Used on the silver marble, jade & blue colored 2000-2013 Hot Spring spas Use this to replace a warped, discolored or a broken skimmer -
This floating "Lily Pad" assembly includes the basket and is located in the filter area on the 2003-2009 Hot Spot Tobago and Trinidad spa models
-
Sku: 77235
Skimmer Weir Kit, Hot Spring
Used on all Hot Spring spa models beginning in 2014 Use this to replace a warped, discolored or a broken skimmer Check your serial number in the parts finder to be sure this part is for your spa -
This white colored guide body (track only) is used to replace warped or broken skimmer weir guides in a white-colored Hot Spring Spas
-
Sku: 70799
Filter Lid O-ring, Hot Spot
O-ring fits around the filter cap just above the threads to seal the pressurized filter canister on all 1993-1997 Hot Spot models This o-ring would need to be replaced if it's missing or leaking -
Sku: 71944
Skimmer Weir Modification in Check Valve
ON BACKORDER WITH THE FACTORY - NO CURRENT ETA Skimmer upgrade replacement for all Tiger River and all Limelight spa models beginning in 1992 Tiger River & Limelight skimmers are replaced if the skimmer weir (floating doughnut) has warped or is sticking, ...read more -
Sku: 70801
O-Ring, Relief Air, Hot Spot
This small o-ring is used on the 70802 air relief valve on the pre 1998 Hot Spot spas filter top -
Sku: 71265
Skimmer Weir Kit, Hot Spring, Cool Gray
This cool gray colored guide body kit is used to replace a warped or broken skimmer weir guides in a blue or jade-colored Hot Spring spa -
Sku: 78180
Weir Door, Gray, Limelight
This is the gray weir door assembly used for Limelight Hot tubs beginning in 2018 -
Sku: 73175
Skimmer Weir Kit, Hot Spring, Warm Gray
This warm gray colored guide body kit is used to replace a warped or broken skimmer weir guides in champagne, pearl white, sand or copper-colored Hot Spring spas -
Sku: 77239
Louvers, Hot Spring
This decorative louver is found below the skimmer wire assembly (77235) on the Hot Spring Grandee, Envoy and Vanguard spa models beginning in 2014 -
Sku: 76122
Filter Vane Assembly, Hot Spot
The filter vane assembly sits on top of the filter area on the Hot Spot Dash & Tempo spa models This vane assembly helps prevent larger items such as thermometers, cups, etc from entering the filter area, helps keep debris that has entered the filter ...read more -
Sku: 71644
Skimmer Weir Ring, Hot Spot and Solana
The gray floating ring is used in all 1998-2002 Hot RE, RLX, SE, SLX, and SLXtra models Also found on all the Solana spas models When the jet pump is activated, the water is drawn into the filter compartment cascading over this "Lily Pad" style floating ...read more -
Sku: 30560
Skimmer Weir, White
Used on the '80-'85 Hot Spring Classic It is held in place with the skimmer weir rod (30564) which is not included -
Complete filter canister for the 2003-2009Hot Spot Mallorca only
-
Sku: 72483
Skimmer Weir Kit, Hot Spring, Taupe
This taupe colored guide body kit is used to replace a warped or broken skimmer weir guide in a champagne-colored Hot Spring spa -
This white-colored fitting is mounted through a pre-drilled hole in the skimmers filter bay on white-colored Hot spring spas Its purpose is to provide an additional water inlet to the filters in the unlikely event of the floating skimmer weir becoming ...read more
-
Complete filter canister for the 2003-2009 Hot Spot Sorrento only
-
This cool gray colored fitting is mounted through a pre-drilled hole in the skimmer's filter bay on blue, jade & silver colored Hot spring spas Its purpose is to provide an additional water inlet to the filters in the unlikely event of the floating ...read more
-
This warm gray colored fitting is mounted through a pre-drilled hole in the skimmer's filter bay on champagne opal, copper, sand & pearl white-colored Hot spring spas Its purpose is to provide an additional water inlet to the filters in the unlikely ...read more
-
Sku: 70992
Skimmer Weir Door, Hot Spot2
This floating skimmer door (flap) is found on all 1995-1997 Hot Spot2 (Hot Spot Squared) models
Showing 1–30 of 47 results