great company to work with, from tech support to delivery of my parts ( A+)On 05/01/2024 by M. K. (verified customer)
Brand: Hot Spring Pre 89, Limelight
Showing 1–30 of 38 results
-
This repair kit for the Watkins No Fault heater includes the replacement end cap for the double barrel PDR heaters which fits the Watkins Manufacturing label only This kit comes with two red seals/o-ring gaskets, replacement screws, 2 side braces and the ...read more -
Sku: 31212O-Ring, Heaterbody 115V 1.5Kw
This o-ring is used to seal the heater element (31255) into the heater housing(s) (part 10475 or 30786) -
Sku: 70108Retainer Gasket, Heaterbody 115V
The Retainer is used to hold the Heaterbody O-ring, (31212) into place on Hot Spring models only -
NOTE: It is recommended to buy the OEM O-Ring (31212) and Gasket (70108) The ones included are slightly thinner than the OEM This 1500 watt heater element is the replacement for all 1980-1994 Hot Spring spa models that operated on 115volts This heater ...read more -
This heavy-duty fiberglass-reinforced polymer split nut comes in two pieces and is designed to replace compression fitting nuts (aka pump union nuts) that have broken due to vibration, age and finally over-tightening The two halves of this fitting are held ...read more -
Sku: 70868-BYPInsulation, Heaterbody 115V
This is an alternate version of the OEM insulation which minimizes the heat loss through the heater housing The insulation is wrapped around the stainless steel heater body used in 115 volt spas made from 1980 to 1994 -
This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit -
Sku: 30348Screw, #10-24 X 3/4in Stainless Steel
Stainless steel screw mostly used on the 1980-1994 115volt Hot Spring heaters to secure the heater element to the heater body Four of these are used with each heater -
Sku: 30392Nut, Hex #10-24in Stainless Steel
Used on the 1980-1994 115volt Hot Spring heaters in conjunction with the stainless steel screw (30348) to secure the heater element to the heater body -
Sku: 31409-BYPHeater Element, Hot Spring, 230v 2.5kW, Pre-1995
What's Included: Heater element w/ power cord, gasket and o-ring This 230v heater element was used on the 1987-1994 Hot Spring Grandee, Highlife and 230-volt Classic and Indoor/Outdoor (later named Sovereign) models There are two heater elements located ...read more -
Stainless steel screw used to secure the heater to the equipment compartment floor on Hot Spring & Tiger River spa models Also used on the SilentFlo 5000 Circulation pump and to hold the Ozonator to the wall of the equipment compartment -
Sku: 31240O-Ring, Heaterbody 230V
This o-ring is used in conjunction with the Retainer Gasket (part 70092) to seal the heater element(s)(part 31409-BYP) into the heater housing (part 70192) -
Sku: 30396Nut, #1/4in-20in Stainless Steel
Stainless steel nut used to secure the 220 volt Hot Spring heater elements (31409-BYP) to the heater housing (70192) -
Sku: 34877O-Ring, Heater Flange, Cartridge Heater
One of two o-rings used to seal the cartridge-style heater to its flange on all 1995-1996 Hot Spring & Tiger River spas and 1995-1997 Hot Spot spa models The second o-ring is a 34876 -
One of two o-rings used to seal the cartridge-style heater to the flange on all 1995-1996 Hot Spring & Tiger River spas and 1995-1997 Hot Spot spa models The other o-ring is a 34877 -
Sku: 10475-BYPHeaterbody, Hot Spring, 115V, 3/4in Ports
What's Included: Heaterbody, 115V -Stainless Steel with two 3/4" ports and one 1/4" port Description: Stainless steel heater housings with 3/4 inch ports were used on all 1990-1994 115v Hot Spring spa models The housing (heater body) is tubular in shape ...read more -
Sku: 30620Insulation, Heaterbody, 230V
The insulation surrounds the heater housing found on all 220 volt Hot Spring Spas manufactured from 1984-1994 This insulation minimizes the heat loss through the heater housing -
Sku: 30120Lug, Grounding
Used on various components in the equipment compartment to provide a place for the grounding wire to attach to -
Sku: 35155Receptacle, Heater-230v, Hot Spring
This heater receptacle mounts into the control box on the 1995-1996 Hot Spring Grandee, Landmark, Highlife, Classic (220volt model), Sovereign (220volt model) and Summit The 220v heater (No-Fault 5500) plugs into this black receptacle on the bottom of the ...read more -
Sku: 20480Plug, Heaterbody Drain – 1/2in
This plug is for the 1989-1994 230v heater This 1/2" size if for the heaters that have a 1/2" drain hose For a 1/4" plug use the 38398 -
Sku: 70095Cord Adapter, 230Volt, Hot Spring
This heater cord adapter allows one to plug the current replacement heater element into the older style Hot Spring control box -
Sku: 30171Heater Receptacle, 220v. Hot Spring
Used on the 1989 Hot Spring 220volt models The Grandee, Highlife, Sovereign IH and Classic FH -
Sku: 37726Heater Housing Tail Piece, 2in x 1 1/2in
This is a heater tailpiece for a 2-inch heater housing The tailpiece is designed to accept a 1 1/2" PVC pipe or a 1 1/2" male PVC fitting The connection should be made using PVC cement and primer -
On Backorder at the factory for the past 12 months Call to speak to one of our techs regarding the alternative insulation 70868-BYP we have available 805-541-9000 This insulation minimizes the heat loss through the heater housing The insulation ...read more -
Sku: 70192Heaterbody Kit, Hot Spring, 230v.
The stainless steal housing is obsolete and no longer available from Factory Replacement heater housing kit for the 1987-1994 230volt Hot Spring Grandee & Highlife, 1984-1994 230volt Classic (IH & FH) and 1984-1994 230volt Indoor/Outdoor & ...read more -
Use this kit if you're replacing your original No-Fault® 5500 or No Fault 1500 Cartridge Style heater on a 1995-1996 Hot Spring or Tiger River spa This kit is no longer available from the factory You can build your own with the following products sold ...read more -
Sku: 70092Retainer Gasket, Heaterbody, 230v
Obsolete, no longer available The Retainer is used to hold the Heaterbody O-ring (31240) into place on Hot Spring Highlife & Grandee model spas manufactured from 1987 to 1994 -
Obsolete: use 10475-BYP What's Included: Heaterbody, 115V -Stainless Steel with two 3/4" ports and one 1/4" port Description: Stainless steel heater housings with 3/4 inch ports were used on all 1990-1994 115v Hot Spring spa models The housing (heater ...read more -
Obsolete: Use the 3/4" heater body 10475-BYP with 70860 reducing elbow and 3/4" vinyl tubing 70315 Stainless steel heater housings with 1/2 inch ports were used on all 1980-1989 115v Hot Spring spa models The housing (heater body) is tubular in shape and ...read more -
OBSOLETE This high-temperature resin housing (looks like black PVC) is the replacement for the 1995-1996 Hot Spring & Tiger River No-Fault 1500 heater cartridge-style heater housing Note: The actual cartridge heater element (the stainless steel rod) ...read more
Showing 1–30 of 38 results