The team at Backyardplus.com are the best for anything Hot Springs. Super friendly and knowledgeable.On 06/05/2024 by S. O. (verified customer)
All the different jets and their related parts for your Hot Spring spa as well as Tiger River, Limelight, Solana and Hot Spot brands.
Brand: Hot Spring Pre 89 | Plumbing: Air Valve, Handles Knobs Levers Bezels, O Ring
Showing 1–30 of 51 results
-
Sku: 37112O-Ring, Precision Jet
Precision Jet o-ring fits between the interior spa shell and the wall fitting nut to prevent leaks from around the jet The o-ring creates a seal between the jet body and the back of the shell when compressed by the wall fitting nut -
Two-position cool gray color Smart Jet selector lever & bezel for all 1998 forward Hot Spring & Tiger River spa models that have a two-position Smart Jet diverter valve This upgraded lever & bezel replaces the obsolete 71610 Check your serial ...read more -
Sku: 73804Air Control Lever, Cool Gray
This is the control lever (Cool Gray) for Hot Spring, Tiger River, Limelight and Hot Spot spa models -
Sku: 33020Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 36153O-Ring, Front Wallfitting
Used on the Soothing Seven Jet and various other jets -
Sku: 33834Lever, Air Valve, White, Hot Spring
This is the replacement air control valve lever for all 1993-2003 Hot Spring spa models (White) -
Sku: 31421Control Air Lever, Hot Spring
Air control lever for 1989-1993 Hot Spring spa models (White) -
Air control lever (Warm Gray) for Hot Spring & Hot Spot spa models -
Sku: 73327On/Off Valve Handle Warm Gray
This warm grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2009 that used warm grey jets and handles -
Sku: 36503Bezel, Air Valve, White, Hot Spring
This bezel fits at the base of the air control levers on all 1993-2003 Hot Spring spa models (White) -
Sku: 34311Lever, Diverter Valve, Hot Spring
Diverter lever (white) for all 1994-1997 Hot Spring spa models -
Sku: 73484-1Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
Sku: 73316On/Off Valve Handle, Cool Gray
This cool grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2010 that used cool grey jets and handles -
The cool gray bezel is the piece on the Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs & Tiger River spa -
This reinforced upgraded replacement lever is for all pre-1994 Hot Spring spa models that have a diverter valve -
Sku: 10437O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
This warm grey Hot Spring Jet bezel is used on the on/off valves for the Amur, Bella Fontana, and Soothing Stream water features on Tiger River and Hotspring spas from 2003 to 2009 5 When screwed down, this bezels clamps down on an o-ring and creates a seal ...read more -
Sku: 34310Bezel, Smart Jet Valve, 2in, Hot Spring
(Ref #3a) This white Smart Jet selector bezel fits below the jet selector diverter valve lever on all white colored 1994-1997 Hot Spring spa models It covers the screws and snap ring that hold the actual valve in place -
Sku: 33994Bezel, Diverter Valve
This is the white jet selector bezel that fits below the jet selector diverter valve lever on all Hot Spring spa models manufactured prior to 1994 It is a finishing piece used to make the valve look nice -
Sku: 31423Hot Spring Jet, Air Control Bezel,
This bezel is at the base of the Hot Spring Jet air control lever (White) -
Sku: 36512Jetstream Bezel, White, Hot Spring
The white bezel is the piece on the 1997-2007 Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs spa -
Sku: 73271Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Sku: 35986O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
Wall fitting nut o-ring -
Sku: 34392Lever and Bezel Cap, Blue
This cap is used on various Air Control levers and Smart Valve Jet selectors from 1992 to 2003 to indicate the different zones that the valve can be used to adjust It also serves to cover the screws that hold the levers or bezels in place -
This o-ring rests behind the rear retainer of the nozzle to prevent water from flowing around the nozzle in the pre-1990 Hot Spring directional jet -
This is the air control lever in white used on Hot Springs Spas from 2006 to 2009 5 It is typically used on the DX series spas that come with Endurol shells and teal tiles around the inside of the spa -
Sku: 39879Jetstream Bezel, Taupe, Hot Spring
The taupe bezel is the piece on the 1997-2007 Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs spa -
Sku: 39878Bezel, Air Valve, Hot Spring, Taupe
This bezel fits at the base of the air control levers on all 1993-2003 Hot Spring spa models (Taupe) -
Sku: 39869Lever, Air Valve, Hot Spring, Taupe
This is the replacement air control valve lever for all 1993-2003 Hot Spring spa models (Taupe)
Showing 1–30 of 51 results