Best place ever, always goodOn 05/31/2024 by M. D. (verified customer)
All the different jets and their related parts for your Hot Spring spa as well as Tiger River, Limelight, Solana and Hot Spot brands.
Showing 1–30 of 78 results
-
Sku: 37112
O-Ring, Precision Jet
Precision Jet o-ring fits between the interior spa shell and the wall fitting nut to prevent leaks from around the jet The o-ring creates a seal between the jet body and the back of the shell when compressed by the wall fitting nut -
Sku: 70307
Silicone Air Tube, Moto Massage Jet
This silicone air tube attaches onto the Moto Massage Jet If it breaks or splits, the Moto Massage Jet won't receive the proper air mixture which in turn will cause it to stop traveling The o-ring (33020) and the cap (30723) are included -
Sku: 36057
Wallfitting, Rear, Precision Jet
Wall fitting (jet body) is installed behind the spa shell for the Precision Jet Both water and air lines feed this fitting The wall fitting nut (not included) inserts through the front of the spa shell and screws into this fitting with an o-ring positioned ...read more -
Sku: 73844
Precision Jet Body
Precision Jet Body (mini-jet) for all Hot Spring, Tiger River, Solana and Hot Spot spas beginning in 2006 This jet body comes with the o-ring Check your serial number in the Parts Finder to be sure this part is for your spa -
Sku: 73539
Air Tube, DX Moto-Massage Jet
Silicone air tube used on the Dual Moto-Massage Jet replacement (73542) for select Hot Spring Models from 2005 to 2018, and the Limelight Gleam from 2013 to 2017 It comes with the O-Ring (33020) and Plastic Cap (30723) -
Sku: 33020
Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 30723
Moto-Massage Air Tube Cap
This cap holds the small blue silicone air tube (70307) onto the Moto-Massage Jet -
Sku: 36153
O-Ring, Front Wallfitting
Used on the Soothing Seven Jet and various other jets -
This Jet Stream jet body is located on Hot Spring and Tiger River spa models
-
Sku: 76525
Jet Body, 5in, Jetstream, Hot Spring
This Jetstream Jet Body was used on all Hot Springs spa models beginning in 2012 It is a 5" in diameter body and houses either the 76526, 76527 or 77178 Jetstream Jet -
Sku: 73484-1
Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
White threaded Jet Stream wall fitting nut inserts through the spa shell and screws into the Jet Stream jet body on 1990-1993, 1997-2011 Hot Spring and Tiger River spas
-
Sku: 76524
Hot Spring Jet, Hydrostream Spa Jet Body
Hot Spring jet body, HydroStream Mid Jet -
Sku: 36058
Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
Sku: 71361
Jet Body with Wallfitting
This kit includes the jet body, wallfitting, large wallfitting o-ring and small wallfitting o-ring for Hot Spring & Tiger River spas -
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
Sku: 36087
Wallfitting Front, Soothing Seven Jet
Front Soothing Seven Jet wall fitting that screws into the rear of the jet body This piece is included in the Wallfitting kit (71362) -
Sku: 32420
Wallfitting Nut, Front
The wall fitting threads into the jet body that is located behind the spa shell and has a silicone o-ring on the spa side to prevent leaking Contrary to popular opinion this wall fitting is the least likely location of an internal leak in any Hot Spring spa -
Sku: 73271
Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Jet body for the Combination style jet used on the Limelight and Hot Spot spas The 74663 and the 74400 insert into this jet body
-
Sku: 71125
Jet Body-Rear
This jet wall fitting or jet body was used on the 1992-1996 Hot Spring Highlife, 1994-1996 Grandee, 1991-1996 Classic, Sovereign, Prodigy and Jetsetter -
Sku: 74359
Hot Spring Jet Body, Combination XL Jet
5" Hot Spring jet body for the Combination XL Jet used on all Limelight spa models This spa jet body is used in conjunction with the 74662 insert -
This jet assembly includes the rear jet body, front wallfitting, and directional jet This can be found on Hot Spot models beginning in 2003
-
Sku: 78145
Jet Body with Nut, 3in, Limelight
Three-inch jet body with nut -
Sku: 78151
Jet Body with Nut, 5in, Limelight
5" jet body with nut for Limelight spas beginning in 2018 -
Sku: 74330
Jet Body, Rear
This jet assembly (jet body) is located on the backside of the spa shell on all 1994-1996 Tiger River Tondi/Sumatran, Manora & Khyber models as well as 1995-1995 Hot Spring Summit & Landmark models -
Sku: 35977
Wallfitting Front Nut
This white nut threads into the jet body that's located behind the spa shell -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
Wall fitting nut o-ring
-
Sku: 73099
Hydrostream Jet Body
Jet Body, HydroStream Mid Jet Hot Spring 2004-2011 Includes O-ring
Showing 1–30 of 78 results