A wrong part was received. I reported the discrepancy, and the correct part was received 3 days later. This timely customer service.On 06/10/2024 by J. L. (verified customer)
All the different jets and their related parts for your Hot Spring spa as well as Tiger River, Limelight, Solana and Hot Spot brands.
Showing 1–30 of 42 results
-
Sku: 37112
O-Ring, Precision Jet
Precision Jet o-ring fits between the interior spa shell and the wall fitting nut to prevent leaks from around the jet The o-ring creates a seal between the jet body and the back of the shell when compressed by the wall fitting nut -
Sku: 32470
Jetstream JetNozzle Seat Ring
The nozzle seat ring goes on the backside of the Hot Spring and Tiger River JetStream Jet nozzle (eyeball) Its purpose is to provide a slick Teflon like backing for the nozzle to pivot against while also being held firmly enough in place to prevent it from ...read more -
Sku: 32872
Directional Jet Seat Ring
This replacement seat ring is placed behind the jet nozzle of 1991-1996 Hot Spring directional jet and various 1995-2002 Hot Spot spa models It provides a Teflon like backing for the nozzle to rotate against -
Sku: 33020
Air Tube O-Ring
This o-ring is used on all moto massage jets It goes on the outside of the blue or red air line that runs alongside the moto massage jet The air line slips over a barbed fitting at the back of the moto massage niche, and this o-ring slides over the air ...read more -
Sku: 36224
Cap, Air Control, Jet Selector, Gray
This gray cap fits on the top of the air control lever to hide the stainless steel screw This cap is also used on the water diverter levers (Smart Jet Selector) white on white spas and gray on all other colored spa shells -
Sku: 33833
Cap, Air Control/Jet Selector, White
This white cap fits on the top of the 1993-2003 Hot Spring Comfort Control air lever to identify it as the Comfort Control Lever for the Moto-Massage Jet on white-colored Hot Spring models only Note: Also used as an upgrade for the colored dots (sticker) ...read more -
Sku: 30723
Moto-Massage Air Tube Cap
This cap holds the small blue silicone air tube (70307) onto the Moto-Massage Jet -
Sku: 36153
O-Ring, Front Wallfitting
Used on the Soothing Seven Jet and various other jets -
Sku: 73484-1
Water Feature Valve Assembly O-Ring
O-ring used in various water feature on/off valve assemblies This item is a single o-ring -
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
Sku: 34368
Cap Retainer, Dream Pillow
Nylon retainer (washer) used between the stainless steel screw that secures the Dream Pillow Bladder in place on the 1995-1999 Hot Spring Landmark and the 1995-1996 Hot Spring Summit -
Sku: 73271
Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Sku: 33342
Retainer Ring, Jetstream Jet, Gray
The gray retainer ring holds the Jetstream Jet eyeball (nozzle) into place It simply screws into place hand tightened only Used on Tiger River and Hot Springs spas made from 1990 to 1993 -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets -
Wall fitting nut o-ring
-
This o-ring rests behind the rear retainer of the nozzle to prevent water from flowing around the nozzle in the pre-1990 Hot Spring directional jet
-
Sku: 30496
Ring, Retainer Jet Front
This part fits behind the retainer, see diagram -
O-ring used in various water feature on/off valve assemblies This item is for a package of ten (10) o-rings For a single o-ring use part number 73484-1
-
Sku: 30495
Ring, Retainer Jet
The retainer that holds the nozzle into place -
Sku: 70333
Ring, Teflon Seal
White Teflon ring that seats the backside of the jet nozzle to pivot against easily while forming a seal around the rear of the nozzle to maximize jet performance There are two of these per jet on the 1993-1994 Hot Spot Round model -
Sku: 74130
Dream Jet O-Ring, Cylinder Base
O-Ring, Cylinder Base 2001 Hot Spring Landmark Dream Jet Massage System -
Sku: 37497
Cap Lever, Steel Blue
Steel Blue lever cap -
Sku: 34533
Jet Nozzle/Ring Assembly Cut Bfly
Jet nozzle ring assembly for Grandee and Highlife 1994-1996 -
Sku: 72982
Mini Jet Front O-Ring
Mini jet front o-ring -
Sku: 39870
Cap, Air Valve Lever, Taupe
OBSOLETE This Taupe Colored Cap is used on the 2002-2003 Hot Spring Air Control Valves -
Sku: 30497
Ring, Retainer Jet Rear
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Rear retainer fits behind the jet nozzle in all pre-1990 Hot Spring spa models This part gives the ...read more -
Sku: 70852
O-Ring, Directional Jet (Set/2)
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Set of 2 o-rings for this directional jet -
OBSOLETE- Use 32470 Teflon nozzle seat provides the 1990-1991 Jet Stream nozzle the ability to be pointed in a direction and remain seated (pointed) Without this part, the nozzle would not be able to stay pointed in any preferred direction
-
This dark blue color-coded cap fits on the top of the 1993-2003 Hot Spring Comfort Control air lever to identify it as the Comfort Control Lever for the Jet Stream Jet
-
Sku: 37499
Air Control Lever Cap, Tiger River
Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Air control lever cap (dark gray) that snaps into place to hide the stainless steel screw that holds the ...read more
Showing 1–30 of 42 results