On 04/15/2024 by R. D. (verified customer)
Showing 61–90 of 239 results
-
Hot Spring jet, Warm Gray color and stainless steel Precision Jet face, eyeball and retainer for all Hot Spring spa models from 2006-2013 The plastic portion of the jet is warm gray color, with a stainless steel trim faceplate
-
Sku: 73287
Precision Jet Kit (Rotary), Warm Gray
With this warm gray color kit you can turn your small directional style Precision Jets into rotary jets that will dazzle you with the way they feel "Warm Gray" is the color of jets used on copper, pearl, sand and champagne opal Hot Spring spas -
The cool gray bezel is the piece on the Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs & Tiger River spa
-
Sku: 71880
Rotary Jet, Taupe
Factory replacement taupe color rotary jet for Hot Spring, Hot Spot, and Solana spa models This jet has been redesigned from the "push-in style" to a "screw-in style" shown This redesign will prevent it from detaching from the holder unexpectedly The ...read more -
White-colored screw cover fits over the stainless steel screw that secures the Moto Massage faceplate to its guide body on all 1989-1996 white-colored Hot Spring spas Two of these are used for each moto massage faceplate Priced individually
-
Warm Gray color and Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River and Solana spa models beginning in 2006 This jet provides a nozzle that can be swiveled to shift the direction of the water stream to customize the massage the jet ...read more
-
This reinforced upgraded replacement lever is for all pre-1994 Hot Spring spa models that have a diverter valve
-
Sku: 36058
Wallfitting, Front, Precision Jet
This wall fitting nut inserts through the spa shell from inside the spa and threads (screws) into the Precision Jet body located behind the spa shell This is the correct wall fitting for all the white-colored 1996 through 2003 Hot Spring spa models -
Sku: 36511
Faceplate, Moto-Massage, Cool Gray
This cool gray face place fits Hot Spring models beginning in 1997 and Solana models beginning in 2000 It fits over the Moto-Massage guide body and is held in place with three stainless steel screws Those screws are hidden under plastic screw covers that ...read more -
Sku: 71361
Jet Body with Wallfitting
This kit includes the jet body, wallfitting, large wallfitting o-ring and small wallfitting o-ring for Hot Spring & Tiger River spas -
Sku: 10437
O-Ring, Wall Fitting
Silicone (rubber will break down in chlorinated water) o-ring to seal the wall fitting nut against the spa shell The wall fitting nut screws into the jet body that's located on the back of the spa shell -
This warm grey Hot Spring Jet bezel is used on the on/off valves for the Amur, Bella Fontana, and Soothing Stream water features on Tiger River and Hotspring spas from 2003 to 2009 5 When screwed down, this bezels clamps down on an o-ring and creates a seal ...read more
-
Sku: 34437
Rotary Jet Nozzle Assembly, White
This white rotary jet and holder converts any adjustable jet into a spinning jet in a 1995-1996 Hot Spring Summit and 1995-1999 Landmark, all 1992-1996 Tiger River models, 1993-1994 Hot Spot Round (Z) and 1995-1996 Hot Spot2 (Y) models -
Sku: 34310
Bezel, Smart Jet Valve, 2in, Hot Spring
(Ref #3a) This white Smart Jet selector bezel fits below the jet selector diverter valve lever on all white colored 1994-1997 Hot Spring spa models It covers the screws and snap ring that hold the actual valve in place -
Sku: 33994
Bezel, Diverter Valve
This is the white jet selector bezel that fits below the jet selector diverter valve lever on all Hot Spring spa models manufactured prior to 1994 It is a finishing piece used to make the valve look nice -
This Precision Hot Spring Jet face is warm gray colored with stainless steel trim for Hot Spring, Tiger River, and Solana spa models beginning in 2006 It is part of the smallest jets used in the spa These jets are usually clustered in groups of 4 or 10 ...read more
-
Sku: 31423
Hot Spring Jet, Air Control Bezel,
This bezel is at the base of the Hot Spring Jet air control lever (White) -
Sku: 36087
Wallfitting Front, Soothing Seven Jet
Front Soothing Seven Jet wall fitting that screws into the rear of the jet body This piece is included in the Wallfitting kit (71362) -
Sku: 36512
Jetstream Bezel, White, Hot Spring
The white bezel is the piece on the 1997-2007 Jetstream Jet that screws into the wall fitting and holds the eyeball nozzle into place The Jet Stream Jet is the largest jet in a Hot Springs spa -
Sku: 32420
Wallfitting Nut, Front
The wall fitting threads into the jet body that is located behind the spa shell and has a silicone o-ring on the spa side to prevent leaking Contrary to popular opinion this wall fitting is the least likely location of an internal leak in any Hot Spring spa -
Sku: 73271
Hydrostream Jet O-Ring
This o-ring is used in the Hydrostream jet for Hotsprings spas made from 2004-2011 It is seated between the jet body and the back side of the shell of the spa and makes the seal between the jet and the spa shell -
Sku: 33342
Retainer Ring, Jetstream Jet, Gray
The gray retainer ring holds the Jetstream Jet eyeball (nozzle) into place It simply screws into place hand tightened only Used on Tiger River and Hot Springs spas made from 1990 to 1993 -
Cool Gray color Precision Jet face, eyeball and retainer for all Hot Spring, Tiger River, Solana and Hot Spot spas beginning in 2006 Usually used in a seat with 10 small jets or the 4 jets above the moto massage jet Check your serial number in the ...read more
-
Sku: 71125
Jet Body-Rear
This jet wall fitting or jet body was used on the 1992-1996 Hot Spring Highlife, 1994-1996 Grandee, 1991-1996 Classic, Sovereign, Prodigy and Jetsetter -
Used on the 2006-2011 Hot Spring models that have cool gray fittings The face of the largest directional jet used in the spa This Faceplate also has a stainless steel trim crimped onto the face
-
Sku: 32421
Jet Face, Hot Spring, White
To replace this 1990-1996 white Hot Spring jet face simply push on the front of this part and rotate counter-clockwise -
This jet assembly includes the rear jet body, front wallfitting, and directional jet This can be found on Hot Spot models beginning in 2003
-
Sku: 74330
Jet Body, Rear
This jet assembly (jet body) is located on the backside of the spa shell on all 1994-1996 Tiger River Tondi/Sumatran, Manora & Khyber models as well as 1995-1995 Hot Spring Summit & Landmark models -
Sku: 35977
Wallfitting Front Nut
This white nut threads into the jet body that's located behind the spa shell -
Sku: 35986
O-Ring, Adj/Jet Small, Hot Spring
Small o-ring used on various jets
Showing 61–90 of 239 results