I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
Find all the plumbing parts you need here. Flexi PVC tubing, Vinyl Tubing, Elbows, Tees, Diverter Valves, Levers & Bezels, Check-Valves, Couplers, and more.
Showing 1–30 of 63 results
-
Sku: 30598
Bleedline Nipple, 1/4in, Hot Spring
This nipple is glued into various PVC fittings in various places on Hot Spring, Tiger River, Limelight, Hot Spot and Solana spa models Simply drill out the broken 1/4" barbed fitting with a 19/64" drill bit (only this size drill bit) Then glue this ...read more -
Two-position cool gray color Smart Jet selector lever & bezel for all 1998 forward Hot Spring & Tiger River spa models that have a two-position Smart Jet diverter valve This upgraded lever & bezel replaces the obsolete 71610 Check your serial ...read more
-
Sku: 73804
Air Control Lever, Cool Gray
This is the control lever (Cool Gray) for Hot Spring, Tiger River, Limelight and Hot Spot spa models -
This plug has been used on the 220volt pre-1995 Hot Spring heater to cap off the drain hose by clamping the 1/4" vinyl drain tubing to the closed 1/4" nipple on this plug Also used in the 71557-BYP Kit
-
Sku: 33834
Lever, Air Valve, White, Hot Spring
This is the replacement air control valve lever for all 1993-2003 Hot Spring spa models (White) -
Sku: 31421
Control Air Lever, Hot Spring
Air control lever for 1989-1993 Hot Spring spa models (White) -
Air control lever (Warm Gray) for Hot Spring & Hot Spot spa models
-
Sku: 73327
On/Off Valve Handle Warm Gray
This warm grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2009 that used warm grey jets and handles -
Sku: 77427
Bleedline Fitting, Circulation Pump
Circulation Pump Bleedline Fitting This special Tee fitting includes 2 X 3/4" barbed fittings, as well as a 1/4" connection No PVC Glue needed and no assembly required like the 72727-BYP (Elbow, 3/4in X 3/4in Barbed with 1/4in Barbed Nipple) -
Sku: 36503
Bezel, Air Valve, White, Hot Spring
This bezel fits at the base of the air control levers on all 1993-2003 Hot Spring spa models (White) -
Sku: 34311
Lever, Diverter Valve, Hot Spring
Diverter lever (white) for all 1994-1997 Hot Spring spa models -
Sku: 73316
On/Off Valve Handle, Cool Gray
This cool grey handle was used on all water feature valves on Hotsprings and Tiger River spas from 2003 to 2010 that used cool grey jets and handles -
This reinforced upgraded replacement lever is for all pre-1994 Hot Spring spa models that have a diverter valve
-
This warm grey Hot Spring Jet bezel is used on the on/off valves for the Amur, Bella Fontana, and Soothing Stream water features on Tiger River and Hotspring spas from 2003 to 2009 5 When screwed down, this bezels clamps down on an o-ring and creates a seal ...read more
-
Sku: 34310
Bezel, Smart Jet Valve, 2in, Hot Spring
(Ref #3a) This white Smart Jet selector bezel fits below the jet selector diverter valve lever on all white colored 1994-1997 Hot Spring spa models It covers the screws and snap ring that hold the actual valve in place -
Sku: 33994
Bezel, Diverter Valve
This is the white jet selector bezel that fits below the jet selector diverter valve lever on all Hot Spring spa models manufactured prior to 1994 It is a finishing piece used to make the valve look nice -
Sku: 31423
Hot Spring Jet, Air Control Bezel,
This bezel is at the base of the Hot Spring Jet air control lever (White) -
Sku: 39705
5 Port Air Manifold, 1in x 3/8in
PVC air manifold, 1" X 3/8", 5-Port -
Sku: 39707
Air Manifold, PVC 1inx3/8in, 4 Port
PVC air manifold, 1" X 3/8", 4-Port -
Sku: 36977
Air Manifold, 4 Port, 3/8in Barbs
This four-port manifold is typically used to feed air to the Precision Jets in a Hot Spring and Tiger River spa This 4 port manifold comes with one end capped off and the other end is 1" slip Depending on the current configuration of yours, the 1" may need ...read more -
Sku: 34392
Lever and Bezel Cap, Blue
This cap is used on various Air Control levers and Smart Valve Jet selectors from 1992 to 2003 to indicate the different zones that the valve can be used to adjust It also serves to cover the screws that hold the levers or bezels in place -
This white flange attaches to the front of the drain valve (slide valve style) and attaches with four screws
-
Sku: 70245
Flange, Rear-Slide Drain-Slip
Flange, rear-slide, drain-slip Hot Spring models 1990 - 1992 slide valve -
This is the air control lever in white used on Hot Springs Spas from 2006 to 2009 5 It is typically used on the DX series spas that come with Endurol shells and teal tiles around the inside of the spa
-
PVC air manifold, 1" Barb Adap, 3/8", 2-Port
Showing 1–30 of 63 results