A wrong part was received. I reported the discrepancy, and the correct part was received 3 days later. This timely customer service.On 06/10/2024 by J. L. (verified customer)
Showing 31–60 of 100 results
-
Sku: 30645
Elbow, 90 Degree 1-1/2in Slip X Slip
This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
This is the cool grey Hot Spring Jet escutcheon set for the Bella Fontana water feature used in certain Hot Springs spa models from 2004 to 2013 Three of these are included in this kit; one for each stream GE clear silicone is used on the backside to hold ...read more
-
Sku: 39438
Adapter, Ell 1/2in Hose X 1/4in Mpt
Adapter, barbed ell, PVC, 1/2" hose x 1/4", male pipe thread -
Sku: 30656
Elbow, 45 Degree 3/4in Slip X Slip
This elbow is used to join two 3/4" male PVC slip fittings or 3/4" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 70906
Elbow/Union Assembly, Hot Spot
This assembly is used in two places on the 1993-1994 Hot Spot equipment compartment One of these assemblies connects onto the discharge (top) of the Wavemaster 3000 jet pump and the other end connects onto one side of the heater The second place is on the ...read more -
Used on the 1995-1997 Hot Spot spas this fitting provided a flange for the cartridge-style heater element to seal against and a "dry-well" for the thermistor probe to slide into
-
Sku: 70245
Flange, Rear-Slide Drain-Slip
Flange, rear-slide, drain-slip Hot Spring models 1990 - 1992 slide valve -
Sku: 32294
Air Control, 2 Bush Assembly
This is the air control body for 1989 to 1993 5 Hot Springs Spas The valve lever and bezel are sold separately The piston included in this kit moves up and down as the valve is turned to restrict and allow air to travel through the valve -
Sku: 30651
Street Elbow, 90 Degree 1in Spig X Slip
This is a 1" 90-degree street elbow made of PVC plastic It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting This allows for the elbow to be used in tighter spaces -
Sku: 32480
Elbow, 3/4in Poly Barbed
This is a 3/4" 90-degree barbed elbow for use with clear 3/4" PVC tubing -
Sku: 30649
Street Elbow, 90 1/2in Spig X Slip
This is a 1/2" 90-degree street elbow made of PVC plastic It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting This allows for the elbow to be used in tighter spaces -
Sku: 300615
416-020 ELL, 2-IN .22.5 Degree
416-020 ell, 2-in 22 5 deg -
Ell, 90, PVC, 3/4" Slip X 1/2" Fipt
-
Sku: 75001
Pump Inlet Assembly, Grandee
The three pieces of this pump inlet assembly come pre-assembled and include the check valve This assembly was used on the jet pump on the 1989-1990 Hot Spring Grandee (G 191001 to G 109999) -
Sku: 73682
Air Valve Control Body
This valve body was used on Hotspring and Tiger Rivers spas made from 2004 to 2005 It is the part of the air valve that holds the air valve lever assembly and connects the valve to the air supply for the spa -
Sku: 30659
Elbow, 45 Degree 1-1/2in Slip X Slip
This elbow is used to join two 1 1/2" male PVC slip fittings or 1 1/2" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30652
Elbow, 90 degree, 1-1/2in Spig X Slip
This is a 1 1/2" 90-degree street elbow made of PVC plastic It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting This allows for the elbow to be used in tighter spaces -
Sku: 20180
Barbed Adapter Elbow, Outlet 1/2in
This elbow adapts a 1/2" male pipe thread fitting to a 1/2" male barbed fitting So a female pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Sku: 38411
427-015 Street Elbow 1-1/2 45 Degree
427-015 street elbow 1-1/2 45 degree -
Sku: 38674
Cross, 2in Slip
Cross, PVC, 2" slip x slip x slip x slip -
Sku: 35046
Drain Assembly, Hot Spot
This drain assembly is used on the Wavemaster 3000 and has a 1-1/2" union coupling (compression fitting) on one end, a slip 1-12" PVC fitting and then a 3/4" male hose fitting for draining on the 1995-1996 Hot Spot spa models This assembly connects onto the ...read more -
Sku: 72231
Air Injector Assembly
Air injector -
Sku: 70901
Air Control, Hot Spot, White
White-colored top-side air control for the 1993-1996 Hot Spot Z (round) model -
Sku: 70835
Drain Assembly, Hot Spot Z
This drain assembly is used on the Wavemaster 3000 and has a 1-1/2" union coupling (compression fitting) on each end and a 3/4" male hose fitting for draining the 1993-1994 Hot Spot Round (Z model) spa This assembly connects onto the jet pump and the Hot ...read more -
Sku: 70088
Elbow with 1/4″ Barbed Nipple
This kit includes a 90-degree elbow 3/4" barbed on one end and 3/4" female threads on the other Also included is a 1/4" nipple which is then glued into either side of the elbow All that is needed is a hole drilled into either side of the elbow using a ...read more -
Reducing elbow, 1x 3/4 slip x slip
-
Sku: 33026
Elbow, 90 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, 1/4in x 1/4in male iron pipe threaded (Mipt) x slip
-
Sku: 31401
Elbow, Reducing, 2in X 1-1/2in
Reducing Ell, 90-degree, PVC, 2" X 1-1/2" -
Sku: 31107
Elbow, 1-1/2in Spigxspig
This PVC elbow is used on the jet pump inlet of many earlier models of Hotspring spas It will connect to a 1 1/2" female PVC slip connector on either end of it It often is tapped with a 1/4" barbed fitting for a bleedline (Part number 30598)
Showing 31–60 of 100 results