I have been doing business with BYP for over 20 years. They have consistently exceeded my expectations, especially in the area that means the most to me; their customer service is second to none. Fair pricing and no shenanigans. You can be confident about spending your hard earned money with this business.On 04/08/2024 by D. P. (verified customer)
Showing 31–60 of 74 results
-
Sku: 30652
Elbow, 90 degree, 1-1/2in Spig X Slip
This is a 1 1/2" 90-degree street elbow made of PVC plastic It has a male PVC fitting on one side, and on the other side, it has a female PVC slip fitting This allows for the elbow to be used in tighter spaces -
Sku: 20180
Barbed Adapter Elbow, Outlet 1/2in
This elbow adapts a 1/2" male pipe thread fitting to a 1/2" male barbed fitting So a female pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Sku: 38411
427-015 Street Elbow 1-1/2 45 Degree
427-015 street elbow 1-1/2 45 degree -
Sku: 70088
Elbow with 1/4″ Barbed Nipple
This kit includes a 90-degree elbow 3/4" barbed on one end and 3/4" female threads on the other Also included is a 1/4" nipple which is then glued into either side of the elbow All that is needed is a hole drilled into either side of the elbow using a ...read more -
Reducing elbow, 1x 3/4 slip x slip
-
Sku: 33026
Elbow, 90 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, 1/4in x 1/4in male iron pipe threaded (Mipt) x slip
-
Sku: 31486
Adapter, 3/4in Slip
Adapter, Barb x Socket, 3/4" x 3/4" -
Sku: 31401
Elbow, Reducing, 2in X 1-1/2in
Reducing Ell, 90-degree, PVC, 2" X 1-1/2" -
Sku: 31107
Elbow, 1-1/2in Spigxspig
This PVC elbow is used on the jet pump inlet of many earlier models of Hotspring spas It will connect to a 1 1/2" female PVC slip connector on either end of it It often is tapped with a 1/4" barbed fitting for a bleedline (Part number 30598) -
2" X 1-1/2" male adapter commonly used on the suction side of pumps
-
This PVC fitting has a female PVC slip fitting and a male pipe thread fitting So it can accept a 1" PVC pipe or male PVC slip fitting and can screw into a 3/4" female pipe threaded fitting
-
This PVC fitting accepts a 1 1/2" male PVC fitting or 1/2" PVC rigid or flexible pipe and has a 1 1/2" male pipe thread fitting on the other end It should be attached using PVC primer and cement
-
Sku: 30671
Adapter, 1/2in Mipt x slip
This PVC fitting accepts a 1/2" male PVC fitting or 1/2" PVC rigid or flexible pipe and has a 1/2" male pipe thread fitting on the other end It should be attached using PVC primer and cement -
This coupling is used to connect a 1/2" male PVC slip fitting a 1/2" PVC female pipe threaded connection together PVC primer and cement should be used to adhere to this fitting
-
Sku: 30658
Elbow 45 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30657
Elbow, 45 Degree 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30655
Elbow, 45 degree 1/2in Slip X Slip
This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, St 90-degree 1-1/2" male iron pipe thread x slip
-
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" female pipe threaded fitting on one side of the elbow And on the other side, it will accept a bare PVC pipe or male PVC slip fitting
-
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer
-
This is a 90-degree elbow, made of PVC, and is made to accept a 3/4" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer
-
Sku: 30644
90 Degree Elbow 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together Reference: 406-010, D2466, ...read more -
Sku: 30641
Elbow, 90 Degree 3/8in Slip X Slip
This elbow is used to join two 3/8" male PVC slip fittings or 3/8" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30614
Elbow, 1/2in Barb X 1/2in Threaded
PVC elbow that allows a 1/2" barbed fitting and a 1/2" threaded fitting to be connected at a 90-degree angle Both fittings are male, and the barbed fitting should be secured using hose clamps, and the threaded fitting should be wrapped in Teflon tape ...read more -
This elbow adapts a 1/2" female pipe thread fitting to a 1/2" male barbed fitting So a male pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side
-
Sku: 34145
Side Outlet Elbow, Hot Spot Z
Side outlet elbow, Hot Spot Z -
Sku: 34364
Elbow, Spigot X Slip Manifold
Elbow, spigot x slip manifold -
Sku: 35749
Bleedline Coupling Assembly, Highlife
Bleedline coupling assembly, Highlife See also, 72726 -
Sku: 35748
Bleedline Coupling Assembly, Hot Spring
Bleedline coupling assembly, Hot Spring
Showing 31–60 of 74 results