Plumbing Fittings

Plumbing: Cap, Injector, Inlet, Tee, Wallfitting

Showing 1–30 of 63 results

  • Injector, Freshwater Ozone, Black
    The injector fits in-line after the Silentflo 5000 (discharge side and after the heater) This Kynar plastic "venturi" injector is ozone resistant and is used with the Freshwater III High Output Ozonator by Watkins manufacturing, item 72602
    $45.47
    Add to cart
  • Injector, Freshwater Ozone, Red
    This red ozone injector was used with the Freshwater I & Freshwater III (for Hot Spot & Solana spas) It is designed to allow a pre-determined amount of ozone bubbles per minute to enter the spa's circulating system The injector is matched to the ...read more
    $43.86
    Add to cart
  • Cap, Drain Valve - 3/4in with Washer
    Black 3/4" hose bib thread cap used on the drains of 1993 forward Hot Spring, Tiger River, Hot Spot, and Solana, and Limelight spa models   It also includes the washer   This cap is used both on the "Primary" Drain Valve, and the "Secondary" Drain Valve
    $1.70
    Add to cart
  • Precision Jet Tee
    This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store
    $14.43
    Add to cart
  • Bypass Tee
    This assembly is found on all Tiger River spas This 3/4" x 1/2" tee has 3/4" male barbed fittings on each end and a 1/2" barbed male fitting on the elbow It is located in front of the circulation pump between the check valve (35233) and the inlet of the ...read more
    $23.43
    Add to cart
  • Wallfitting, Rear
    This fitting is used on many different Hot Spring spa models in various places including the grill style filter compartment as part of the filter assembly Also used in the filter compartment of all 1992-1996 Tiger River spa models
    $21.92
    Add to cart
  • Tee, 1/4in X 1/4in X 1/4in Black Polybarb
    Barbed tee 1/4" on all three sides Used with 1/4" vinyl tubing and 1/4" clamps
    $3.89
    Add to cart
  • Street Elbow, 2in, 45 Degree, Spigot X Slip
    Drain valve black cap, washer and ring assembly used on 2004 forward Hot Spring and Tiger River spa models
    $19.86
    Add to cart
  • Wallfitting without Knockout, Tiger River
    This threaded wall fitting is located in the bottom of the filter compartment on all 1997-2010 Tiger River Bengal, Caspian, Sumatran & Siberian spa models This is where the filter standpipe screws into
    $15.37
    Add to cart
  • Diverter Valve Wallfitting Nut
    Tee, Barbed, Black Poly, 1/2" x 1/2" x 1/2"
    $3.60
    Add to cart
  • Tee, 1/2in Slip X Slip X Slip
    This PVC tee will accept 1/2" male rigid or flexible PVC pipe or male PVC fittings   1/2" schedule 40 thick-walled clear vinyl PVC can also be glued directly to this fitting   PVC primer and cement should be used on this fitting   Failing to use primer ...read more
    $4.64
    Add to cart
  • Manifold, Flow Cone
    PVC tee, 2" X 1-1/2" X 1-1/2" slip
    $9.22
    Add to cart
  • Manifold, Flow Cone
    This tee allows three 2" male PVC slip connections, or 2" PVC pipe (rigid or flexible) to be joined together, one of which is perpendicular to the other two connections   PVC primer and glue should be used to adhere to the male connections tog the fitting
    $6.39
    Add to cart
  • Manifold, Flow Cone
    Wall fitting, rear drain, 1/2" drilled, Hot Spring   Rear wall fitting located in the footwell of the spa   Front wall fitting part 30488
    $19.31
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This is a regular 3/4"Slip x 3/4" Slip x 3/4" Slip pvc fitting available at most hardware stores
    $3.38
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This elbow is used to join two 2" male PVC slip fittings or 2" PVC rigid or flex pipes together at a 45 degree angle   PVC primer and cement should be used to secure this fitting to the fittings it is joining together
    $6.39
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This PVC tee has three connections   The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 1 1/2" PVC pipe or ...read more
    $20.19
    Add to cart
  • Cap, Air Valve Lever, Taupe
    This Tee accepts three 1 inch PVC pipe connections or male PVC fittings   All connections should be made using both PVC primer and PVC cement   The connections are oriented in a T style layout
    $4.92
    Add to cart
  • Fitting, Comp 45 Degree with O-Ring
    Tee, PVC, 3/4" X 1/2" X 1/2"
    $4.61
    Add to cart
  • Tee, 2in X 2in X 1in Slip X Slip X Slip
    This PVC tee has three connections   The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 1" PVC pipe or male ...read more
    $13.49
    Add to cart
  • Tee, 1-1/2in X 1-1/2in X 1/2in Slip X Slip X Slip
    This PVC tee has three connections   The two connections opposite each other are 1 1/2" slip connections, able to accept a 1 1/2" PVC pipe, or a 1 1/2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 1/2" PVC ...read more
    $12.15
    Add to cart
  • Elbow, 3/4in Poly Barbed
    The three pieces of this pump inlet assembly come pre-assembled and include the check valve This assembly was used on the jet pump on the 1989-1990 Hot Spring Grandee (G 191001 to G 109999)
    $51.10
    Add to cart
  • Tee, 2in X 2in X 3/4in Slip X Slip X Slip
    This PVC tee has three connections   The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting   The other connection, perpendicular to the other connections accepts a 3/4" PVC pipe or male ...read more
    $6.90
    Add to cart
  • Elbow, 3/4in Poly Barbed
    The four pieces of this pump inlet assembly come pre-assembled and include the check valve This assembly was used on the jet pump on the 1989 Hot Spring Jetsetter, Prodigy, and Sovereign Also used on the 1991-1992 Grandee
    $75.72
    Add to cart
  • Red Ozone Injector FreshWater III
    Ozone Injector assembly including tubing and check valve for Hot Spot and Solana model spas without dedicated circulation pumps   This injector is designed for when a 2-speed jet pump is used to circulate the water through the heater
    $79.70
    Add to cart
  • Elbow, 3/4in Poly Barbed
    Gray wallfitting, for Hot Spring
    $19.55
    Add to cart
  • Tee, Valve Drain 1/2in X 1/2in Barb
    Used on Tiger River drain assemblies, check your serial number in the parts finder above to be sure this part is for your spa
    $1.95
    Add to cart
  • Tee, 1in X 3/4in X 3/4in Slip Connection
    Tee, 1" x 3/4" x 3/4", slip connection
    $11.95
    Add to cart
  • Bushing, 2in X 1in Spig X Slip
    This T is used to join three 1 1/2" PVC pipes, rigid or flexible, or male PVC slip fittings   PVC cement and primer should be used in order to make the connection   The connections are oriented in a T-style in relation to each other
    $8.14
    Add to cart
  • Red Tee 3/4in X 3/4in X 1/2in Slip
    Red tee 3/4in x 3/4in x 1/2in slip
    $3.49
    Add to cart

Showing 1–30 of 63 results