I would like to express how excellent this company is. I inherited a house with a 2007 Hotspring Aria hot tub. The spa hasn’t been operated in years and when I turned it on, it ran for about 10 minutes and died. I mean dead died. I knew absolutely nothing about hot tubs but with the excellent diagnosis videos, installation videos and superior phone support, I was able to replace the main control board, heater relay board, heater, circulation pump, the ozonator and all associated tubing. This took 4 1/2 hours over two days (I had to watch videos) but the spa runs like new! I had one question regarding the jumper voltage 18 or 12. I spoke with a technician and he was able to answer my question as well as helping me double check the voltages for the components on the relay board. I am handy with electronics and electricity and am comfortable working with 230 volts. Shipping was fast and as expected. I highly recommend BackYardPlus.On 06/28/2024 by F. R. (verified customer)
Plumbing: Jet, On Off Valve, Reducer, Snap Ring, Tee, Valve Body, Wallfitting
Showing 1–30 of 67 results
-
Sku: 36160Precision Jet Tee
This tee is used to glue onto the rear of the Precision Jet Body and provides a 1/2" connection on either side of the tee This tee is not available at the local hardware store -
Sku: 73920Water Feature On-Off Valve Assembly
This on-off valve assembly is found on Hot Spot and Limelight spa models from 2006 through 2014 It is used to turn on and off the bar top Amur water feature that runs off one of the jet pumps in the spa This valve turns 270 degrees, for 2014 tubs, please ...read more -
Sku: 70425Bypass Tee
This assembly is found on all Tiger River spas This 3/4" x 1/2" tee has 3/4" male barbed fittings on each end and a 1/2" barbed male fitting on the elbow It is located in front of the circulation pump between the check valve (35233) and the inlet of the ...read more -
Sku: 30490Wallfitting, Rear
This fitting is used on many different Hot Spring spa models in various places including the grill style filter compartment as part of the filter assembly Also used in the filter compartment of all 1992-1996 Tiger River spa models -
Barbed tee 1/4" on all three sides Used with 1/4" vinyl tubing and 1/4" clamps -
This threaded wall fitting is located in the bottom of the filter compartment on all 1997-2010 Tiger River Bengal, Caspian, Sumatran & Siberian spa models This is where the filter standpipe screws into -
Sku: 31487Tee, 1/2in X 1/2in Barb
Tee, Barbed, Black Poly, 1/2" x 1/2" x 1/2" -
Sku: 30626Tee, 1/2in Slip X Slip X Slip
This PVC tee will accept 1/2" male rigid or flexible PVC pipe or male PVC fittings 1/2" schedule 40 thick-walled clear vinyl PVC can also be glued directly to this fitting PVC primer and cement should be used on this fitting Failing to use primer ...read more -
Reducer Bushing, 3/4" Spig x 1/2" Slip This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 3/4" female slip fitting The connection should be made using PVC primer and cement -
Sku: 34458Red Tee 2in X 1-1/2in X 1-1/2in
PVC tee, 2" X 1-1/2" X 1-1/2" slip -
Sku: 32465Tee 2in
This tee allows three 2" male PVC slip connections, or 2" PVC pipe (rigid or flexible) to be joined together, one of which is perpendicular to the other two connections PVC primer and glue should be used to adhere to the male connections tog the fitting -
Sku: 71128Wallfitting, Drain Drilled
Wall fitting, rear drain, 1/2" drilled, Hot Spring Rear wall fitting located in the footwell of the spa Front wall fitting part 30488 -
Sku: 34751Tee 3/4in Slip X Slip X Slip
This is a regular 3/4"Slip x 3/4" Slip x 3/4" Slip pvc fitting available at most hardware stores -
Sku: 32467Elbow, 45 Degree 2in
This elbow is used to join two 2" male PVC slip fittings or 2" PVC rigid or flex pipes together at a 45 degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
This PVC tee has three connections The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1 1/2" PVC pipe or ...read more -
Sku: 31288Reducer, 2in X 1-1/2in Spig X Slip
Reducer Bushing, 2" Spig x 1-1/2" Slip This bushing allows for a 1 1/2" male slip fitting or PVC pipe, rigid or flexible, to connect to a 2" female slip fitting The connection should be made using PVC primer and cement -
Reducing Bushing, 1"Spig X 1/2" Slip This bushing allows a 1/2" male slip fitting or 1/2" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting The connection should be made using PVC primer and cement -
Sku: 30627Tee, 1in Slip X Slip X Slip
This Tee accepts three 1 inch PVC pipe connections or male PVC fittings All connections should be made using both PVC primer and PVC cement The connections are oriented in a T style layout -
Reducer Bushing, 1" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 1" female slip fitting The connection should be made using PVC primer and cement -
Sku: 36975Red Tee, 3/4in X 1/2in X 1/2in
Tee, PVC, 3/4" X 1/2" X 1/2" -
Sku: 30667Coupling, Reducer 1in X 3/4in Sxs
This adapter is used to join a 3/4" PVC male fitting and a 1" PVC male fitting together PVC primer and cement should be used to adhere the fittings -
Sku: 30638Tee, 2in X 2in X 1in Slip X Slip X Slip
This PVC tee has three connections The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1" PVC pipe or male ...read more -
This PVC tee has three connections The two connections opposite each other are 1 1/2" slip connections, able to accept a 1 1/2" PVC pipe, or a 1 1/2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1/2" PVC ...read more -
This PVC tee has three connections The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 3/4" PVC pipe or male ...read more -
Sku: 71263Wallfitting, Gray, without Knockout
Gray wallfitting, for Hot Spring -
Sku: 33320Tee, Valve Drain 1/2in X 1/2in Barb
Used on Tiger River drain assemblies, check your serial number in the parts finder above to be sure this part is for your spa -
Sku: 30630Tee, 1in X 3/4in X 3/4in Slip Connection
Tee, 1" x 3/4" x 3/4", slip connection -
Sku: 30628Tee, 1-1/2in Slip X Slip X Slip
This T is used to join three 1 1/2" PVC pipes, rigid or flexible, or male PVC slip fittings PVC cement and primer should be used in order to make the connection The connections are oriented in a T-style in relation to each other -
Sku: 33611Red Tee 3/4in X 3/4in X 1/2in Slip
Red tee 3/4in x 3/4in x 1/2in slip -
Sku: 37681Red Bushing, 2in X 3/4in (437-248)
Reducer Bushing, 2" Spig x 3/4" Slip This bushing allows a 3/4" male slip fitting or 3/4" PVC pipe, rigid or flexible, to be adapted to fit in a 2" female slip fitting The connection should be made using PVC primer and cement
Showing 1–30 of 67 results