Plumbing Fittings

Showing 301–330 of 372 results

  • Drain Screen, Cool Gray, Hot Spring, Tiger River & Hot Spot
    OBSOLETE use part 77226 Drain screen for Hot Spring, Tiger River, Solana, and Hot Spot spa models This perforated screen (grill) has many small holes to prevent debris from clogging the floor drain This screen simply unscrews from the 1-1/2" threaded ...read more
  • Coupling, Barbed, 3/4in x 3/4in
    Sku: 70384

    Coupling, Barbed, 3/4in x 3/4in

    This item is obsolete and replaced by:
    304654
    This is a barbed coupling used to splice together 3/4" vinyl tubing used in Hot Spring & Tiger River, Limelight, Hot Spot and Solana spas   This fitting would normally be used to repair a broken line
  • Wallfitting Rear, Drain, Hot Spring
    Sku: 35911

    Wallfitting Rear, Drain, Hot Spring

    This item is obsolete and replaced by:
    71128
    This rear wall fitting is found on the backside of the spa shell and attached to the drain plumbing It has a front wall fitting (30488) and o-ring (30482) that screws into it from the front side of the spa shell The front wall fitting has a female 1-1/2" ...read more
  • Drain Valve, Hot Spring
    This white drain valve was used on all 1993-2001 Hot Spring spa models The original had a black turn knob on top of the gate valve and this replacement has a red handle
  • Drain Valve Knob, Hot Spring
    Sku: 33916

    Drain Valve Knob, Hot Spring

    This item is obsolete and replaced by:
    33937
    Drain valve turn knob for all 1993-2001 Hot Spring spa models This knob attaches to the 33937 valve This part does not include the top screw that secures it to the valve stem
  • Adapter, Union 1-1/2in
    Used on the 30215 Starite Jet pump   This adapter screws into the 1 1/2" FPT fitting on the jet pump and accepts the union used on spas that use the 30215 jet pump in the early 90s   This piece will only work with the original union   If the union has been ...read more
    $26.58
    Add to cart
  • Copper Drywell w/ O-Ring, Hot Spring, (Short)
    Drywell (thermowell) for all pre-1989 Hot Spring spas This copper dry well comes in two different lengths 70324 (long) houses the spa hi-limit and the control thermostat capillary bulbs in the pre-1989 Classic model D & E, Classic Model F (F-115000 to ...read more
  • Soothing Stream with Light, Cool Gray
    Sku: 76068

    Soothing Stream with Light, Cool Gray

    This item is obsolete and replaced by:
    73625
    Obsolete: Factory Suggested replacement is 73625 (please note that the light will not work with this replacement) Soothing Stream assembly in cool gray color for all 2009 forward Hot Spring spas This replacement unit has the LED light and the 2009 ...read more
  • Rear Venturi Wallfitting
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Rear wallfitting for the Hydro-Air jet used in all Hot Springs models in 1990 and 1991
  • Handle, Slide Drain
    OBSOLETE This handle is used on the drain valve for Hotspring spas manufactured from 1990 to 1992   It's a gate style valve that is pulled up vertically to open and pushed down to close   The valve is made up of a few components that can be replaced when ...read more
  • Drain Valve Handle, Slide Valve Style
    Obsolete: No factory suggested replacement available at this time Please contact our technicians at (805) 541-9000 or wizard@backyardplus com for advice This drain valve body has a T shaped white handle that is pulled upwards when it's time to drain the ...read more
  • Plug, Drain Slide 1-1/2in
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com 1-1/2' male threaded PVC plug Available at most hardware stores in various forms
  • Adapter, Male 3/4in
    OBSOLETE-This item is available at most hardware stores- (Spears - 436-007) This adapter attaches to a male 3/4" rigid or flexible PVC pipe using PVC primer and cement   It gives you a 3/4" threaded male garden hose fitting which is commonly found on a ...read more
  • Ring, Retainer Wallfitting
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Wallfitting retainer ring
  • Plug, Freeze Pump
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This plug is used to close off the threaded fittings that are built into most jet pump volutes   These ...read more
  • O-Ring, Drain Plug 1-1/2in
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com O-Ring, Drain Plug 1-1/2" Used in 1990 - 1992 Hot Springs Models   Drain Plug screws into the Drain ...read more
  • Adapter, Female 3/4in
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Adapter, female 3/4in
  • Suction Cap 1 1/2in White
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Suction Cap 1 1/2in White
  • Flow Restricter Valve Assembly
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This flow restrictor is installed inline with the airflow through the Freshwater II Ozonator to prevent ...read more
  • Air Filter, Freshwater II
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The air filter was used to screen out dust and bugs that could get drawn into the Freshwater II Ozonator
  • Cap Suction Warm Gray
    Sku: 73550

    Cap Suction Warm Gray

    This item is obsolete and replaced by:
    75147
    OBSOLETE, use 75147 This suction cap is used on Solana spas covering the water intake in the footwell of the spa   It helps prevent the intake from being completely covered and also prevents large debris from getting sucked into the jet pump
  • O-Ring, Drain Nipple Xp
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com
  • Pump Inlet Assembly, Classic
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com The four pieces of this pump inlet assembly come pre-assembled and include the check valve This ...read more
  • Fittings, Pvc 3/4in X 3/4in Barbed 10-4578
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com This fitting can be glued into a 3/4" female PVC fitting using PVC primer and cement   The other end of ...read more
  • Ozone Flow Restrictor, Freshwater
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com A flow restrictor reduces the amount of ozone that will be sucked into the injector through the ...read more
  • 1/4in Barbed Fitting with O-ring, Wavemaster
    Sku: 71595

    1/4in Barbed Fitting with O-ring, Wavemaster

    This item is obsolete and replaced by:
    32267
    OBSOLETE- Use the 32267 This barbed nipple screws into the front (suction cover) and is used on all Wavemaster Jet Pumps as well as the Sta-Rite 1Hp & 2Hp jet pumps on everything but Tiger River spas which use a 33732 nipple The function of this ...read more
  • Copper Drywell with O-Ring, Hot Spring
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com Drywell (thermowell) for all pre-1989 Hot Spring spas This copper dry well comes in two different ...read more
  • Pump, Wavemaster 5000 1.5HP V2
    OBSOLETE Use pvc primer and pvc cement on this 1-1/2" X 1" X 1" fitting
  • Wallfitting, Pvc Rear
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com  
  • Starite Compression Fitting, 1-1/2in
    Obsolete: No factory suggested replacement available at this time Please contact our technicians for advice (805) 541-9000 or wizard@backyardplus com 1-1/2" compression coupling assembly (pump union) for all 1-1/2" Starite pump volutes Sta-Rite pumps ...read more

Showing 301–330 of 372 results