I find backyard plus sort of amazing.. Whenever I have a problem with my 18 year old tub (which is about ever 9 months or so) I can almost always go here and find parts. They describe how to troubleshoot to verify that this part might be broken and provide great videos on how to replace. When I jumped in the tub a few weeks back (and then jumped right out... it was cold!) I didn't hesitate, tracked down this part... verified it was a replacement and ordered it. Two days later I replaced it (my old board looked fine from the front but when I pulled it off you could see the charring on the back) and now the hot tub it happily working again! They are amazon-like in how fast they ship, have great support (the few times I had to call in with a question) and provide great example videos and written documentation -- if you are AT ALL handy you can totally maintain the hot tub yourself and backyard plus is a great partner. Regarding this specific part -- I had a 2006 model and the board was a different design but 100% fit with no problems -- The thing to test is ifs your HTR led is on there should be voltage (128v AC in my case) switched to the heater unit (the cables to the left of the board) -- mine registers about 2v AC so I suspected it was this board. As I mentioned when I replaced it you could see the charring on the backside and the new board is now happily working great.On 04/08/2024 by J. M. (verified customer)
Plumbing: Barbed Fitting, Elbow, Tee
Showing 61–90 of 99 results
-
Sku: 30658Elbow 45 Degree 1-1/4in Slip X Slip
This elbow is used to join two 1 1/4" male PVC slip fittings or 1 1/4" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30657Elbow, 45 Degree 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Sku: 30655Elbow, 45 degree 1/2in Slip X Slip
This elbow is used to join two 1/2" male PVC slip fittings or 1/2" rigid or flexible PVC pipes together at a 45-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
Elbow, St 90-degree 1-1/2" male iron pipe thread x slip -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" female pipe threaded fitting on one side of the elbow And on the other side, it will accept a bare PVC pipe or male PVC slip fitting -
This is a 90-degree elbow, made of PVC, and is made to accept a 1/2" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
This is a 90-degree elbow, made of PVC, and is made to accept a 3/4" male pipe threaded fitting on each side of the elbow The fitting should either have Teflon tape wrapped on the threads, or use some sort of pipe thread adhesive, or sealer -
Sku: 3064490 Degree Elbow 1in Slip X Slip
This elbow is used to join two 1" male PVC slip fittings or 1" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together Reference: 406-010, D2466, ...read more -
Sku: 30641Elbow, 90 Degree 3/8in Slip X Slip
This elbow is used to join two 3/8" male PVC slip fittings or 3/8" rigid or flexible PVC pipes together at a 90-degree angle PVC primer and cement should be used to secure this fitting to the fittings it is joining together -
This PVC tee has three connections The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1/2" male threaded ...read more -
This PVC tee has three connections The two connections opposite each other are 2" slip connections, able to accept a 2" PVC pipe, or a 2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1/2" PVC pipe or male ...read more -
This PVC tee has three connections The two connections opposite each other are 1 1/2" slip connections, able to accept a 1 1/2" PVC pipe, or a 1 1/2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 3/4" PVC ...read more -
This PVC tee has three connections The two connections opposite each other are 1" slip connections, able to accept a 1" PVC pipe, or a 1" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1 1/2" PVC pipe or ...read more -
This PVC tee has three connections The two connections opposite each other are 1" slip connections, able to accept a 1" PVC pipe, or a 1" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1 1/4" PVC pipe or ...read more -
This PVC tee has three connections The two connections opposite each other are 1" slip connections, able to accept a 1" PVC pipe, or a 1" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 3/4" PVC pipe or male ...read more -
This PVC tee has three connections The two connections opposite each other are 1" slip connections, able to accept a 1" PVC pipe, or a 1" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1/2" PVC pipe or male ...read more -
This PVC tee has three connections The two connections opposite each other are 3/4" slip connections, able to accept a 3/4" PVC pipe, or a 3/4" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1" PVC pipe or ...read more -
Sku: 30614Elbow, 1/2in Barb X 1/2in Threaded
PVC elbow that allows a 1/2" barbed fitting and a 1/2" threaded fitting to be connected at a 90-degree angle Both fittings are male, and the barbed fitting should be secured using hose clamps, and the threaded fitting should be wrapped in Teflon tape ...read more -
Sku: 30611Tee, Bleedline 1/2in X 1/2in X 1/4in
Barbed, Black Poly Tee, 1/2" x 1/2" x 1/4" -
This elbow adapts a 1/2" female pipe thread fitting to a 1/2" male barbed fitting So a male pipe thread fitting can be attached to one side of the elbow, and 1/2" tubing on the other side -
Fitting, 3/16in barbed x 3/8in male iron pipe threaded -
This PVC tee has three connections The two connections opposite each other are 1 1/2" slip connections, able to accept a 1 1/2" PVC pipe, or a 1 1/2" male PVC slip fitting The other connection, perpendicular to the other connections accepts a 1 1/4" PVC ...read more -
Sku: 34145
Side Outlet Elbow, Hot Spot Z
Side outlet elbow, Hot Spot Z -
Sku: 34364Elbow, Spigot X Slip Manifold
Elbow, spigot x slip manifold -
Sku: 35076401-213 Tee Red 1-1/2 X 1-1/2 X 2
401-213 tee, red 1-1/2 x 1-1/2 x 2 -
Sku: 74134Bleedline Fitting, White
Bleedline fitting for 2001 Hot Spring Landmard Dream Jet Plumbing System -
Sku: 36296
Ell 3/8in barbed x 1/2in Slip
Ell, 3/8in barbed x 1/2 slip -
Sku: 300947
Reducing Elbow 1 In X 1/2 In
Reducing elbow 1 inch by 1/2 inch for Hot Spot models beginning in 2003, Hot Spring models beginning in 2007, and Limelight models beginning in 2008 -
Sku: 36954
Reducing Elbow, 1 Inch x 3/4 Inch
Reducing elbow 1 inch by 3/4 inch for various models and applications -
Sku: 304653-BYPCoupler, Barbed, 3/8in x 3/8in
3/8" barbed coupling used to splice in 3/8" vinyl tubing (70317) Old item number 72582
Showing 61–90 of 99 results